IceToolz Hub Lubricant, Compound
of calcium sulfate. Unique, high-quality
calcium sulphate based lubricant
thickener. The combination with a medium viscose
petroleum raw material makes this a wide
usable lubricant.
Fits the grease gun with article number GI14
IceToolz Copper Grease, Anti-Wear,
protects metal against corrosion, heat
and moisture. Ideal for hubs, nuts,
bolts, bearings and BB. High quality
lubrication even when used sparingly.
Temperature range: -25øC ~ 200øC.
Volume: 4oz. / 120ml. Contains copper, gr
The IceToolz sawing, drilling and tapping oil is
necessary for each job mentioned
metal. The saw, drill and tap oil ensures
lubrication and cooling of the part to be machined.
IceToolz article number of these saw blades
for carbon is C143.
De IceToolz 12B8 spaaknippelsleutel is bedoeld voor het afstellen van 3,2 mm spaaknippels bij wielonderhoud en wielbouw. Het T-vormige handvat biedt grip tijdens het verdraaien van een nippel en het maken van kleine correcties.
Specificaties
Model: 12B8
Voor spaaknippels van 3,2 mm
T-vormig handvat
Fabrikantnummer: 24012B8
Verkoopeenheid: één spaaknippelsleutel
Gebruik en montage
Gebruik een sleutel die nauwkeurig op de nippel past. Controleer de spaakspanning en de rondloop tijdens het afstellen van het wiel.
Bottom Bracket Tool 3-notch IceToolz 240M083 made of Cr-Mo Steel To be used with 1/2 socket wrench (#53R4) Brand: IceToolz Article number: 240M083 Material: Cr-Mo Steel Number of notches: 3
This IceToolz extreme high-pressure pump is a sturdy aluminum pump with a beautiful handle and a pressure gauge. This designer high-pressure pump is suitable for all valves due to its dual head. The high-pressure pump has a volume of no less than 320cm³ and pumps up to 260PSI or 18bar! The IceToolz article number for this high-pressure pump is A652. IceToolz designer high-pressure pump pumps to very high pressure (18bar). IceToolz is a brand that focuses on both the professional and the (more advanced) DIY enthusiast in the bicycle industry. But also the regular cyclist is catered to with handy maintenance products and easy-to-use articles. IceToolz is a brand where you can find those things that make your hobby as a cyclist, mechanic or bicycle professional easier. Pay attention to the orange detail: choice of the professional. This IceToolz very-high-pressure pump is a very powerful high-pressure pump. This pressure pump pumps up to a maximum of 18bar or 260PSI, which is an extremely high pressure for a bicycle pump. Even many compressors cannot handle this high pressure. This high-pressure pump can. The dual head ensures that all valves can be inflated. The long pump hose of this high-pressure pump can be clipped over the ergonomic handle to the pump, securing the pump immediately. In short, a purchase for the long term. IceToolz: the choice of the professional and the DIY enthusiast! Brand: IceToolz Material: Aluminum Volume: 0.32 liter Suitable for tubeless: No Valve type: Dunlop / Presta / Schrader Maximum air pressure: 260 PSI Pressure gauge: Yes Color: white
IceToolz tire lever set of 2, fiberglass nylon The beautifully designed IceToolz tire levers feel comfortable in hand and are very sturdy. The combination of these materials results in a slightly flexible tire lever that is strong enough to remove even the toughest tire. The hooks are for hooking the tire lever onto the spokes.
IceToolz multitool Star-8 The IceToolz multitool is a handy and sturdy 8-function tool in pocket knife format. This IceToolz multitool has a beautiful aluminum design and the tools themselves are made of steel, so a strong multitool is guaranteed. The IceToolz article number for this multi-pocket knife tool is 96T1. IceToolz; with this multitool, a toolbox in your pocket. IceToolz is a brand that focuses on both the professional and the (more advanced) do-it-yourselfer in the bicycle industry. But also the ordinary cyclist is considered with handy maintenance products and easy-to-use articles. IceToolz is a brand where you can find those things that make your hobby as a cyclist or mechanic or as a bicycle professional easier. Note the orange detail: the professional's choice. This IceToolz multitool is a sturdy and compact tool set with all possible torx sizes for bicycles. The necessary bicycle tools in your pocket for emergency repairs.
The IceToolz safety flag in orange is made of sturdy fiberglass. It is 150cm long, increasing visibility. It naturally comes with a holder for the rear axle. The IceToolz article number for this safety flag is 51G0. IceToolz safety flag for good visibility IceToolz is a brand that caters to both professionals and experienced DIY enthusiasts in the bicycle industry. However, it also offers practical maintenance products and easy-to-use items for the average cyclist. IceToolz is a brand where you can find things that make your hobby as a cyclist, mechanic, or bike professional easier. The top IceToolz color. For the safety and visibility of children's bikes or trailers. Perhaps there are more moments of use imaginable for this safety flag. Clearly visible for all special objects in traffic. IceToolz: the choice of professionals and DIY enthusiasts! Brand: IceToolz Article number: 24051G0 Material: Fiberglass
To keep your brakes in good condition, youmust regularly check the brake fluid in yourhydraulic brakes and replace it if necessary.With the IceToolz brake fluid tester, you caneasily check the water content of the brakefluid. Although mineral oil attracts lessmoisture than DOT, water accumulates in thebrake line over time due to its hygroscopicproperties. This not only leads to corrosion.Even worse: The brake fluid in the calipercan boil due to the high friction temperaturewhen the brake is heavily used. This createsair bubbles that cannot be sufficientlycompressed. Braking efficiency is reduced oreven absent...Details:Å Tester for DOT brake fluid and mineral oilÅ Measurement of electrical resistance in thereservoir on the brake leverÅ Rapid determination of water content in thebrake fluidÅ For assessing oil quality as a replacementrecommendationÅ Colored LED indicator for water content(wet boiling point)Å Green = OK: no water in the brake fluidÅ Yellow = OK: < 1% / < 2%, contains littlewaterÅ Red = not OK: < 3% / > 4%, contains toomuch water, replacement recommendedÅ Visual display of charge levelÅ With mounting clip Technical specifications:Å Power supply: 1 x micro-battery LR03/AAA(not included)Å Material: plastic, metalÅ Dimensions: approx. Ø 20 x 230 mmÅ Weight: approx. 60 g Scope of delivery:Å 1 x IceToolz 54T1 brake fluid testerAttention: In addition to bleeding whennecessary, the brake fluid in the hydraulicbrake system must be replaced at least every2 to 3 years for safety reasons. Seemanufacturer's information. Discoloration ofthe mineral oil or water content can give anindication. Important! When replacing, useonly brake fluids recommended and approved bythe brake manufacturer.To keep your brakes in good condition, youshould regularly check the brake fluid in yourhydraulic brakes and replace it if necessary.With the IceToolz brake fluid tester, you caneasily check the water content in the brakefluid. Even though mineral oil attracts lessmoisture than DOT, water will accumulate inthe brake line over time due to itshygroscopic properties. This not only leads tocorrosion. Much worse: The brake fluid in thebrake caliper can start to boil due to the highfriction temperature when the brake is heavilyused. This creates air bubbles that cannot besufficiently compressed. The braking effect isreduced or even absent...Details:Å tester for DOT brake fluid and mineral oilÅ measurement of electrical resistance in thereservoir on the brake leverÅ quick determination of the water content inthe brake fluidÅ for assessing oil quality as a replacementrecommendationÅ colored LED indicator of the water content(wet boiling point)Å green = OK: no water in the brake fluidÅ yellow = OK: < 1% / < 2%, contains littlewaterÅ red = not OK: < 3% / > 4%, contains toomuch water, replacement recommendedÅ visual display of charge statusÅ with clip for attachment Technical data:Å power supply: 1 x micro-battery LR03/AAA(not included)Å material: plastic, metalÅ dimensions: approx. Ø 20 x 230 mmÅ weight: approx. 60 gScope of delivery:Å 1 x IceToolz 54T1 brake fluid testerPlease note: In addition to bleeding whennecessary, the brake fluid in the hydraulicbrake system must be replaced at least every2 to 3 years for safety reasons. Seemanufacturer's information. Discoloration ofthe mineral oil or the water content canprovide clarification here. Important! Whenreplacing, use only brake fluids that arerecommended and approved by the brakemanufacturer.
BRAND NAME: ICETOOLZ
CUSTOMER GROUP: UNI
KEYWORD: BRAKE OIL
The IceToolz ratchet wrench is a long ratchet with a ½" drive. This ratchet wrench is made of sturdy steel and rotates on both sides after the ratchet is depressed. This ratchet wrench is often mentioned in the descriptions of other IceToolz products and has the advantage of being nice and long. Over the years, some items become increasingly tight. A long ratchet wrench is a godsend and saves a lot of time in the workshop. The IceToolz ratchet wrench has a comfortable grip and is compatible with many IceToolz chainring removers and bottom bracket tools.
IceToolz Air Gun with Pressure Gauge and Double Head
The IceToolz air gun is a popular choice in many professional workshops. It works quickly, accurately, and fits any valve. A C-type quick coupling is standard, but the ARO-210 is included. The familiar double-head fitting fits any valve, the pressure gauge is easy to read, and the scale is color-coded.
Air pistol with pressure gauge IceToolz is a brand aimed at both professionals and (advanced) DIY enthusiasts in the bicycle industry. Even the average cyclist will find handy maintenance products and easy-to-use accessories. IceToolz makes the lives of cyclists and bicycle professionals easier.
Use and benefits
Inflating your own tire has never been easier than with this air gun. Customers can easily do it themselves, without any instructions. The color indication on the pressure gauge scale is clear. The air gun is equipped with a well-functioning double cap that fits perfectly on any valve.
Watch this video for correct use.
These IceToolz nitrile rubber gloves are ideal for workshop use. Made of durable nitrile rubber, they are the same for both hands. They feel natural and protect against dirt, oil, and corrosive liquids.
These IceToolz nitrile rubber gloves are ideal for workshop use. Made of durable nitrile rubber, they are the same for both hands. They feel natural and protect against dirt, oil, and corrosive liquids.
This handy pneumatic bleeder pump eliminates the traditional method of pushing the brake lever back and forth. Using compressed air (90-120 PSI), the bleeder creates negative pressure in the brake system, sucks out all the used oil and air, and fills the system with fresh brake fluid.
Removes O-rings, oil seals, and other seals. - 90-degree hook - straight hook - 45-degree hook - round hook. The 3mm diameter metal part allows you to easily reach into tight spaces. The serrated, non-slip design of the metal part provides a firm support point, making your work easier.
IceToolz CO2 cartridge 16 grams
The IceToolz CO2 cartridge contains 16 grams of CO2 for quickly inflating a tire. This threaded cartridge fits all mini pumps that use threaded CO2 cartridges. The IceToolz part number for a single CO2 cartridge is A821.
IceToolz CO2 cartridge with wire
IceToolz is a brand that caters to both professionals and (advanced) DIY enthusiasts in the bicycle industry. But regular cyclists are also catered to, with handy maintenance products and easy-to-use accessories. IceToolz is a brand where you can find things that simplify your hobby as a cyclist, mechanic, or bicycle mechanic. Note the orange detail: the professional's choice. This is an IceToolz air cartridge that fits all CO2 mini pumps that use a threaded connection. These are most mini pumps. Screwing in this CO2 cartridge breaks the cap on the CO2 cartridge. At that point, the CO2 cartridge is already inside the pump's cap, preventing any gas from escaping.
This IceToolz CO2 cartridge contains 16 grams of CO2, enough to inflate a road bike tire to approximately 9 bar/130 psi, depending on the tire size. For an MTB tire, this 16-gram CO2 cartridge is sufficient for approximately 2.5 bar/39 psi.
IceToolz: the choice of professionals and DIY enthusiasts!
The IceToolz Y-wrench comes in two sizes (4 and 5 mm) and the increasingly common T25. The Allen wrench fits comfortably in your hand, and you'll always have the right tool at hand. This Y-wrench is made of chrome-vanadium steel with a plastic grip.
The IceToolz Y-wrench comes with three Allen key sizes: 3, 4, and 5 mm. The Allen key fits comfortably in your hand, and you'll always have the right size key at hand. This Y-wrench is made of chrome-vanadium steel with a plastic grip.
Robust design and the best tool set for outdoor use
3x4x5x6x8mm Allen key
Phillips and socket screwdriver
T-25 star wrench
Material: stainless steel, plastic
Packaging: card
This ICETOOLZ tool is designed for reliability and ease of use. Solution IceToolz 24066G1 - jar with 50 tubes of 10 ml. Icetoolz other. Solution IceToolz 24066G1 - jar with 50 tubes of 10 ml Solution IceToolz 24066G1 - jar with 50 tubes of 10 ml Brand: IceToolz Color: orange Material: plastic Suitable for tubeless yes/no: no USP: 50 tubes of glue in a jar
