This ICETOOLZ tool is designed for reliability and ease of use. Professional repair stand IceToolz Xpert E137. Icetoolz other. Professional repair stand IceToolz Xpert E137 IceToolz Xpert Professional Tripod Repair Stand, Item No.: E137. Rotating clamp system for 25.4 - 55mm frame tubes. For 1 bike. Easily adjustable with quick-release fasteners and foldable for transport, quick release adjustable for working heights of 130-180cm. The tripod stand (leg length 90cm) provides a stable platform. Tool tray must be ordered separately.
This ICETOOLZ tool is designed for reliability and ease of use. Advance IceToolz 85A5 Toolbox for the advanced bicycle mechanic. Icetoolz other. Advance IceToolz 85A5 Toolbox for the advanced bicycle mechanic Advanced Toolbox IceToolz 85A5 carrying case WD-40 lubricant (51ml) bottom bracket tool for Shimano ISIS drive cassette lockring tool bottom bracket/crank adapter tool Shimano Hollowtech II tape measure up to 3 meters 8-hole spoke nipple wrench 2-sided brush, crank puller star key set (T-10x15x20x25x27x30x40x45x50) Allen key set with ball end (1.5x2x2.5x3x4x5x6x8x10mm) cone key set (13x14x15x16x17x18x19mm) adjustable spanner 6" cable round cutting pliers, pedal wrench 15mm Phillips screwdriver PH1 screwdriver S6 tire lever set 3 pcs Pro chain tool (7x8x9x10speed) chain cover freewheel tool 1/2" adapter wrench arm with QR function
This ICETOOLZ tool is designed for reliability and ease of use. TwinHead Wrench IceToolz 7M60 - 6 mm Allen keys. Icetoolz other. TwinHead Wrench IceToolz 7M60 - 6 mm Allen keys IceToolz TwinHead Wrench, Article No.: 7M60, 6mm Allen keys with ball end SKS2 steel
This ICETOOLZ tool is designed for reliability and ease of use. TwinHead Wrench IceToolz 7M50 - 5 mm Allen keys. Icetoolz other. TwinHead Wrench IceToolz 7M50 - 5 mm Allen keys TwinHead Wrench IceToolz 7M50 - 5 mm Allen keys IceToolz TwinHead Wrench, article no.: 7M50, ball end SKS2 steel
This ICETOOLZ tool is designed for reliability and ease of use. TwinHead Wrench IceToolz 7M40 - 4 mm Allen keys. Icetoolz other. TwinHead Wrench IceToolz 7M40 - 4 mm Allen keys IceToolz TwinHead Wrench, Article No.: 7M40, 4mm Allen keys with ball joint ends SKS2 steel
This ICETOOLZ tool is designed for reliability and ease of use. IceToolz 74B1 6-in-1 Y-key set. Icetoolz other. Y-key set IceToolz 74B1 6-in-1 IceToolz Y-key set, Item no.: 74B1, With low-pressure pin, 4x6mm Allen & Phillips bits. Suitable for e.g., in-line roller skates. Patented.
This ICETOOLZ tool is designed for reliability and ease of use. IceToolz 36Q1 Allen key set. Icetoolz other. IceToolz 36Q1 Allen key set IceToolz Allen Key Set, 36Q1.
This ICETOOLZ tool is designed for reliability and ease of use. IceToolz 33D1 dummy pedal. IceToolz other. IceToolz 33D1 dummy pedal IceToolz Dummy Pedal. Item No.: 33D1 Ideal for use in bicycle repair and assembly. Easy and efficient auxiliary tool for turning the crank.
This ICETOOLZ tool is designed for reliability and ease of use. IceToolz 12D3 spoke nipple wrench for 3.6 mm (square nipples). IceToolz other. IceToolz 12D3 spoke nipple wrench for 3.6 mm (square nipples) IceToolz Spoke Nipple Wrench. Item No. 12D3 For 3.6mm (square) nipples Cr-V steel, PP, TPR With ergonomically shaped handle and interval markings For very fast tightening and tensioning
This ICETOOLZ tool is designed for reliability and ease of use. IceToolz 12B5 spoke wrench set for 3.2 mm (square) nipples. IceToolz other. IceToolz 12B5 spoke nipple wrench set for 3.2 mm (square) nipples IceToolz Spoke Nipple Wrench Set (Item No. 12B5) For 3.2mm (square) nipples. Includes items 24012B3 and 24012B7.
This ICETOOLZ tool is designed for reliability and ease of use. IceToolz 12B3 spoke wrench for 3.2 mm (square) nipples. IceToolz other. IceToolz 12B3 spoke nipple wrench for 3.2 mm (square) nipples IceToolz Spoke Nipple Wrench. Item No. 12B3 For 3.2mm (square) nipples Cr-V steel, PP, TPR With ergonomically shaped handle and interval markings For very fast tightening and tensioning
This ICETOOLZ tool is designed for reliability and ease of use. IceToolz 12A7 spoke wrench for 3/16" (hexagon) nipples. Icetoolz other. IceToolz 12A7 spoke nipple wrench for 3/16" (hexagon) nipples IceToolz Spoke Nipple Wrench. Item no. 12A7, for 3/16" (hexagon) nipples. T-handle designed for higher spoke tensions above 60N.
This ICETOOLZ tool is designed for reliability and ease of use. IceToolz 12A5 spoke wrench set for 3/16" (hexagon) nipples. Icetoolz other. IceToolz 12A5 spoke wrench set for 3/16" (hexagon) nipples IceToolz Spoke Nipple Wrench Set Item No: 12A5 For 3/16" (Hexagon) nipples Includes Item Nos 24012A3 and 24012A7
This ICETOOLZ tool is designed for reliability and ease of use. IceToolz 08C5 Ergo Stainless Steel Spoke Nipple Wrench. Icetoolz Other. Spoke nipple wrench IceToolz 08C5 Ergo stainless steel Suitable for 3.45mm nipples. Ergonomic design for high spoke tension.
This IceToolz multi pedal wrench is a
pedal wrench for the 15mm connection of
almost any pedal with a pedal on the other side
hook and a freewheel remover. The 23cm
long pedal wrench is long enough to fit properly
to apply force and still get the stuck pedal
to loosen. The rubber grip is comfortable in the d
hand. With this Cr-Mo steel pedal wrench you have
you have something solid in your hands.
This pedal key is such an example of this.
This pedal wrench is made of strong Cr-Mo
steel so it can withstand a blow. Because of the
rubber grip makes it easy to hold and
the 14mm and 15mm socket wrenches are often needed
when tinkering with bicycles. That's why I end up
This pedal key is often found in the back pocket of a
Bicycle repairman: always at hand. Pay attention to the
orange detail: the professional's choice.
Key for Fixie, Fixed Bikes, track bike,
track bike, racing bike, racing bike
equipped with a chain whip
pedal wrench 15mm
retaining ring spanner (hook wrench)
also suitable for BMX cassette hub, bottom bracket,
bottom bracket with lock ring to be mounted or dismounted
key for Fixie, Fixed Bikes, track bike,
track bike, BMX,
Circlip wrench (hook wrench)
also suitable for the retaining ring of the
BMX cassette hub and bottom bracket, bottom bracket ring
to fix or disassemble
The IceToolz bottom bracket headset lockring tool is a
easy tool to use correctly, without the
frame and/or lockring to damage, the
lockring of the bottom bracket cup or headset cup to loosen
turning. This lockring tool with IceToolz
Catalogue number 11H1 is suitable for various
sizes of lock rings. With these Cr-Mo steel
lockring tool you have something decent in your hands.
With this lockring hook it is possible to
to loosen the lockring correctly without
frame to be damaged. Take care, especially with the
bracket cup, on the opposite thread. At
For the bracket this tool is often used
combination used with the adjustable
bottom bracket pliers 11A0 from IceToolz.
Key for Fixie, Fixed Bikes, track bike,
track bike, BMX,
Circlip wrench (hook wrench)
Also suitable for the retaining ring of the
BMX cassette hub and bottom bracket, bottom bracket ring
to fix or disassemble
Suitable for removing the front
gear of a Bikkel Tuba.
The IceToolz cassette remover for the
cassette lockring is a commonly used item in a
frequently used item in a bicycle workshop. This
buyer, made of chrome vanadium, guarantees
for a long life. This cassette remover
has a 12mm guide pin for hubs with
through axles and can be used with a «Ä
socket wrench (IceToolz number 53R4) or a 21mm
wrench (IceToolz number 4721). The IceToolz
cassette collector is suitable for:
ShimanoÓ CS, SRAM, SunRace, Chris King compatible
cassettes and ShimanoÓ Center Lock disc brakes.
The IceToolz article number of this HG customer is
09C2.
This patented IceToolz cable and
spoke cutter is a unique pair of pliers with a legion
of possibilities The small opening cuts
effortlessly through everything with a diameter smaller
than 3.5mm. The cable and spoke cutter can
here the spokes are also on without any difficulty.
way of cutting it is suitable for
inner cables, the inner cables are not
flattened and therefore out of the structure
taken. The outer cables are for the larger
opening of the cable and spoke cutter also
no problem at all. And the Kevlar cable grommet, which
after cutting what is bent, you can use this
can be repaired in one go by means of
of the pen in the orange cap on the cable and
spoke cutter. In addition to these functions, it is also
possible to have both sizes of end caps
mount to the inner and outer cable. The
IceToolz article number of this cable and
spoke cutting pliers is 67A5.
This IceToolz cable and spoke cutter is
a unique and patented cutting pliers that
his way of cutting is first of all suitable
for cutting both internal and external
outdoor cables. Because the cable and
spoke cutters around the inner cable
cuts, towards the center, keep the
individual wires of the inner cable in the
original twisted structure and
one does not experience any hindrance from protruding
wires when inserting the inner cable into the
outer cable. In addition, this cable and
spoke cutter of such a quality that
the cable and spoke cutters are no problem at all
has with cutting a spoke. The
larger opening is suitable for the
cutting the outer cable and the orange
tab can be used to secure the kevlar
cable grommet to be nicely round again after cutting
to get.
Also the two end caps for both outside and
can be connected within the cable without having to
damage, be clamped to the cable with
the special openings of these cable and
spoke cutter
Attachment jaw for vice
Magnets hold the clamp firmly in place
place
Prevents rotation when adjusting the hub
Key size:
14 mm
30 mm
36 mm
5 mm
10 mm
12 mm
9 mm
20 mm
25 mm
The IceToolz Allen key set contains the three most
used allen keys. These allen keys
fit comfortably in the hand due to the ergonomic design
handle. Allen key set is made of wear-resistant
steel. The IceToolz article number of this
combination allen key is 70TA.
This handy Allen key set contains the three
most commonly used sizes. The ball head end of
This Allen key also makes that difficult to
reach Allen bolts easy to loosen
These are the Allen keys that others are for.
to remain lying down.
4, 5, 6 mm with ball head version
Ergonomic T-grip handle
The IceToolz multitool is a handy and sturdy
5-function tool in pocket knife format. This multi-tool
from IceToolz is made of steel, so
A guaranteed powerful multi-tool. The IceToolz
The article number of this multi-tool is 95A1.
This multi-tool from IceToolz is a sturdy and
compact tool with the most
common Allen sizes, and 2
screwdrivers. The necessary bicycle tools
carry in your pocket for emergency repairs.
* Allen key 4 mm
* Allen key 5 mm
* Allen key 6 mm
* Screwdriver -
* Screwdriver +
The IceToolz Essence toolbox is a set
Good quality bicycle tools. With
This tool box can hold many basic
repairs are done on bicycles. The
IceToolz article number of this complete
tool box is 82F4.
With the IceToolz range of bicycle tools
This toolbox contains most of the basic
bicycle jobs to be carried out. Nice assortment
bicycle tools for the novice handyman, for
in the broom wagon, in front of the clubhouse of the
cycling club and more.
This complete set of bicycle tools is nicely
packed in a handy case. With this set
bicycle tools all tools are present
to:
* Tire lever x3
* Cassette/Freewheel remover with guide pin
* Crank adapter, Hollowtech II
* Crank puller
* Chain tool (5~12 speed)
* Nipple spanner 10G~15G
* Screwdriver -, 6 mm
* Screwdriver +, #1 Phillips
* Open-end wrench (9, 10 mm)
* Adjustable wrench 6Ã
* Allen key 8 mm
* Adapter 8mm to 1/2×
* Bottom bracket wrench, Shimano/ ISIS Drive
* Valve hose 8 cm
* Torx key T-25
* Pedal wrench 15 mm, Freewheel remover,
Bottom bracket wrench with hook
The IceToolz brake shoe adjuster is a great
Handy device. Suitable for various sizes
brake pads and rims. With the brake shoe straightener
adjust the brake shoe to the correct height,
distance to rim in the correct toe-in. The
brake shoe adjuster indicates by means of a
clear arrow indicating the front/direction of travel.
IceToolz article number of the
brake shoe straightener is 55B1.
The IceToolz brake shoe straightener is a tool for
professional and do-it-yourselfer. With the arrow towards
the direction of travel of the wheel over the rim
The ideal position for the brake pads is clamped
determine.
If the brake pads are completely parallel to the rim
If they are placed there is a good chance that they will
squeak. The brake pads should be toe-in
be placed. This means that the front
of the brake pads slightly closer to the rim
then point to the back. With this slant,
toe-in has already been taken into account
brake shoe adjuster. The front of the
brake shoe straightener is slightly thinner than the
back. The correct height can also be easily
can be determined with the brake shoe straightener.
Mount the brake pads against the top edge
of the brake shoe adjuster and the
brake shoe/pads are in the correct position.
This IceToolz cone wrench set is a lightweight
cone wrench set that is easy to take with you.
One side of the cone key is for the
sizes 13 and 15mm and the other for the sizes
14 and 16mm. The second cone wrench is for the
Lock nut. The IceToolz article number of this
cone wrench set is 0502.
This set of cone wrenches from IceToolz is made
made of Cr-Mo steel, so nice and sturdy.
Multifunctional, so easy to take with you
or have it available as standard in the workshop.
The cone keys are a godsend for repairs
with the cups and lock nut loosened
must be and the normal steel wrenches are
too thick. These IceToolz cone wrenches then offer
solace.
This IceToolz nipple spoke spanner has the
star shape for the MavicÓ nipples. The MavicÓ
nipples have an unusual shape, a
Star-shaped nipple. This nipple spoke tensioner
has the fit for the MavicÓ on one side
M7 nipple and on the other side the M9 fitting.
The IceToolz article number of this nipple-
spoke tensioner is 12H4.
This ICETOOLZ tool is designed for reliability and ease of use. Reaming, tapping and milling kit IceToolz Xpert E185. Icetoolz other. Reaming, tapping and milling kit IceToolz Xpert E185 IceToolz Xpert Bottom Bracket and Headset Reamer, Tap and Face Mill Tool Set,
This ICETOOLZ tool is designed for reliability and ease of use. IceToolz 12D5 spoke wrenches for 3.6mm (square) nipples. IceToolz other items. Spoke nipple wrenches IceToolz 12D5 for 3.6mm (square) nipples Install the nipples using the screwdriver wrench and tension them using the T-handle wrench #12D3. With ergonomically shaped handle and interval markings. For very fast turning and tensioning #12D7. T-handle designed for higher spoke tensions above 60N.
This ICETOOLZ tool is designed for reliability and ease of use. Icetoolz 12B7 spoke wrench for 3.2 mm (square nipples). Icetoolz other. Icetoolz 12B7 spoke nipple wrench for 3.2 mm (square nipples) T-handle designed for higher spoke tension above 60N
This other one from ICETOOLZ is red. Ideal for everyday use and of high quality. IceToolz 08C3 spoke wrench for 3.45mm/80ga/0.136 inch nipples - red. IceToolz other red. IceToolz 08C3 spoke nipple wrench for 3.45mm/80ga/0.136 inch nipples - red IceToolz spoke wrench, Cr-Mo steel. Red coated 3.45mm/80ga/0.136 inch nipples.
