A bicycle pedal with a non-slip insert on both sides made of patented SANDBLOCK® material, a durable polypropylene axle housing, and a cage, specifically designed for use on electric bicycles. It can also be used on city, trekking, and hybrid bikes. The "lightweight" ball bearing system provides significant savings in weight and height
The pedals are each equipped with integrated approved reflectors on both sides and a closed bearing system . Type of pedal
"2 component pedal", which consists of:
a black polypropylene axle housing and cage (one piece)
The extra-large "anti-slip" insert in the cage is made of gray TPE (thermoplastic elastomer). Ball bearing
Adjustable and lightweight ball bearing system, according to the "ball & cone" principle, on both sides
With 14 x 3/32" ball bearings on both sides Axle
Boron steel, heat treated to 75HRA (+/-3) With 9/16"- 20 TPI thread Reflectors
Integrated into the cage of the pedal
Approved according to BS, JIS, TPP, as well as the German StVZO standards Dimensions
222* x 90 x 27 mm (*length x width x height)
*length = maximum length of pedal mounted (part that protrudes beyond the crankset) Weight
364 gr/per set Standard
The pedal complies with the ISO standard. ISO 4210-8: "Cycling - Safety requirements for bicycles - Pedal and crankset test methods" SANDBLOCK Sandblock® is the official Marwi-registered trademark for a patented composition of materials that forms a wear-resistant, perfect anti-slip insert for pedals. The material's anti-slip properties are guaranteed, even when wet or stained with oil or grease. This anti-slip insert is inseparable from the pedal thanks to a special, waterproof technology. UNION SANDBLOCK® pedals feature an extra-large anti-slip insert (for more direct contact with the cyclist's shoe) and are specially designed for use on e-bikes. The advantages of this high-quality SANDBLOCK® anti-slip insert are:
A very good anti-slip function, much better than that of the usual TPR (rubber) insert
Significantly more wear resistance compared to the usual TPR (rubber) insert The anti-slip function remains optimal, even when the material surface is wet or stained with oil or grease. The SANDBLOCK® anti-slip surfaces are highly wear-resistant, water-resistant, and firmly bonded to the robust polypropylene cage of the pedal using a new, patented technology. Compared to the self-adhesive sandpaper versions of pedals used, this strong bond is waterproof and cannot be separated or removed from the pedal. Technical details and test results:
Various laboratory tests prove that the SANDBLOCK® cannot be separated or removed from the pedal cage, even when using tools.
The anti-slip function of the SANDBLOCK® has much better performance than the standard anti-slip material made of sandpaper
An anti-slip durability test shows that with a load of 30 kg and at 10,000 cycles, the material wears off only 0.25 mm When using standard sandpaper, this already shows signs of wear after 20 cycles. SANDBLOCK® does not do this.
Standard sandpaper is easily separated from the pedal's polypropylene cage. This isn't the case with SANDBLOCK®. By using SANDBLOCK® material instead of TPR or standard sandpaper, these UNION pedals offer an even higher level of safety for cyclists in all weather conditions.
A bicycle pedal with a large anti-slip insert on both sides and a robust aluminum axle housing, specially designed for use on electric bicycles. It can also be used on city, trekking, and hybrid bikes. The closed cassette (cartridge) bearing ensures frictionless movement
The pedals are equipped with integrated approved reflectors on both sides and the closed bearings TECHNICAL INFORMATION Pedal type
"3-component pedal" consisting of: - a cast aluminum axle housing, polished to a high gloss or electro-dyed black finish; - the pedal cage is made of black polypropylene; - the extra-large anti-slip insert in the cage is made of gray TPE (thermoplastic elastomer). Ball bearings
An industry-standard, maintenance-free bearing system on both sides Each pedal is equipped with a sealed cartridge bearing and a sliding bushing.
CrMO steel, heat treated to 75HRA (+/-3)
With 9/16"- 20 TPI thread Reflectors
Integrated into the pedal cage
Approved according to BS, JIS, TPP, as well as the German StVZO standards Dimensions
111* x 90 x 27 mm (*length x width x height)
*length = maximum length of pedal mounted (part that protrudes beyond the crankset) Weight
504 gr/per set Standard
The pedal complies with the ISO standard.
ISO 4210-8: "Bicycles - Safety requirements for bicycles - Pedal and crankset test methods"
This other MARWI item is finished in black. Ideal for everyday use and of high quality. Marwi Selle San Remo Monaco bicycle saddle - black. Marwi other black. Marwi Selle San Remo Monaco bicycle saddle - black Comfortable and well-finished city/trekking bike saddle from Selle San Remo: the Monaco. Features: Foam: Vacuum Rails: ED black steel rails with elastomer suspension Saddle cover: Polyurethane (PU) Base: Black polypropylene and fiberglass Dimensions: 255 x 220 mm Weight: 720 grams Delivered without saddle clamp.
This other MARWI item is finished in black. Ideal for everyday use and of high quality. Marwi HS-45 1 1/8" tapered semi-integrated headset - black. Marwi other black. Marwi HS-45 1 1/8" tapered semi-integrated headset - black 1 1/8" aluminum tapered semi-integrated steering bearing. Specifications: Material: Aluminum Color: Black Diameter upper cups: 44.0 mm Diameter lower cups: 56.0 mm Cone diameter: 40 mm Design: Threadless Steerer tube diameter: 28.6 mm
This other MARWI item is finished in black. Ideal for everyday use and of high quality. Marwi HS-40 1 1/8" tapered integrated headset - black. Marwi other black. Marwi HS-40 1 1/8" tapered integrated headset - black 1 1/8" aluminum integrated steering bearing. Specifications: Material: Aluminum Color: Black Diameter upper bearing cups: 42.0 mm Diameter lower bearing cups: 52.0 mm Cone diameter: 39.8 mm Design: Threadless Steerer tube diameter: 28.6 mm
This other MARWI item is finished in black. Ideal for everyday use and of high quality. Marwi HS-35 1 1/8" Semi-Integrated Headset - Black. Marwi Other Black. Marwi HS-35 1 1/8" semi-integrated headset - black 1 1/8" aluminum integrated steering bearing. Specifications: Material: Aluminum Color: Black Diameter upper bearing cups: 44.0 mm Diameter lower bearing cups: 44.0 mm Cone diameter: 30 mm Design: Threadless Steerer tube diameter: 28.6 mm
This other MARWI item is finished in black. Ideal for everyday use and of high quality. Marwi HS-30 1 1/8" integrated headset - black. Marwi other black. Marwi HS-30 1 1/8" integrated headset - black 1 1/8" aluminum integrated steering bearing. Specifications: Material: Aluminum Color: Black Diameter upper bearing cups: 41.8 mm Diameter lower bearing cups: 41.8 mm Cone diameter: 30 mm Design: Threadless Steerer tube diameter: 28.6 mm
This other MARWI item is finished in black. Ideal for everyday use and of high quality. Marwi GH-175 Cube derailleur hanger (hanger + axle cap) - Black. Marwi other black. Marwi GH-175 Cube derailleur hanger (hanger + axle cap) - Black Aluminum derailleur hanger, suitable for the following bicycle brands: Cube Material: AL 6061 aluminum, cold forged Delivery includes: derailleur hanger incl. mounting screw
This MARWI miscellaneous is designed for reliability and ease of use. Derailleur hanger Marwi GH-260 Cannondale, Bulls. Marwi other. Derailleur hanger Marwi GH-260 Cannondale, Bulls Rear dropout with 2 x M 3 x 0.5 cm screws for Cannondale and Bulls. Material: AL 6061 aluminum, cold forged. Delivery includes: derailleur hanger incl. mounting screw.
This MARWI miscellaneous is designed for reliability and ease of use. Derailleur hanger Marwi GH-257 Cube. Marwi other. Derailleur hanger Marwi GH-257 Cube Aluminium derailleur hanger, suitable for the following manufacturers: Cube Material: aluminium AL 6061, cold forged Scope of delivery: derailleur hanger, mounting screws
This MARWI miscellaneous is designed for reliability and ease of use. Derailleur hanger Marwi GH-255 Bulls. Marwi other. Derailleur hanger Marwi GH-255 Bulls Marwi offers a wide range of gear hangers (derailleur rear dropouts) that fit most bicycles equipped with a derailleur gear system. Gear hangers are designed to bend or break, preventing damage to the frame in the event of a fall. Therefore, gear hangers are originally made of 6061 cold-forged aluminum. There are many different models of gear hangers. This is because the design of the gear hanger is related to the design of the frame's dropout section. All Marwi gear hangers are 100% identical to the original gear hanger on your bicycle. And that's precisely why a Marwi gear hanger is the safest choice. This frame hanger/derailleur hanger fits the following bicycle brands: Bulls
This MARWI miscellaneous is designed for reliability and ease of use. Derailleur hanger Marwi GH-216 Focus. Marwi other. Derailleur hanger Marwi GH-216 Focus Marwi derailleur pad/frame hook GH-216 Focus
This MARWI miscellaneous is designed for reliability and ease of use. Marwi GH-200 derailleur hanger for Bianchi, Focus, Stevens, and other brands. Marwi other. Derailleur hanger Marwi GH-200 Bianchi, Focus, Stevens and other brands Marwi derailleur hanger/frame hook GH-200 for Bianchi, Focus, Stevens, and other brands. Material: AL 6061 aluminum, cold-forged. Delivery includes: derailleur hanger incl. mounting screw.
This MARWI miscellaneous is designed for reliability and ease of use. Derailleur hanger Marwi GH-192 Cannondale. Marwi other. Derailleur hanger Marwi GH-192 Cannondale Aluminum derailleur hanger, suitable for the following bicycle brands: Cannondale Material: AL 6061 aluminum, cold forged Delivery includes: derailleur hanger incl. mounting screw
This MARWI miscellaneous is designed for reliability and ease of use. Derailleur hanger Marwi GH-180 Stevens, Kuota and other brands. Marwi other. Derailleur hanger Marwi GH-180 Stevens, Kuota and other brands Aluminum derailleur hanger, suitable for the following bicycle brands: Stevens, Kuota, Isaac and others Material: AL 6061 aluminum, cold forged Delivery includes: derailleur hanger incl. mounting screw
This MARWI miscellaneous is designed for reliability and ease of use. Derailleur hanger Marwi GH-170 Ghost. Marwi other. Derailleur hanger Marwi GH-170 Ghost Aluminum derailleur hanger, suitable for the following bicycle brands: Ghost Material: AL 6061 aluminum, cold forged Delivery includes: derailleur hanger incl. mounting screw
This MARWI miscellaneous is designed for reliability and ease of use. Derailleur hanger Marwi GH-165 Cube. Marwi other. Derailleur hanger Marwi GH-165 Cube Aluminum derailleur hanger, suitable for the following bicycle brands: Cube Material: AL 6061 aluminum, cold forged Delivery includes: derailleur hanger incl. mounting screw
This MARWI miscellaneous is designed for reliability and ease of use. Derailleur hanger Marwi GH-162 Lapierre, Koga. Marwi other. Derailleur hanger Marwi GH-162 Lapierre, Koga Aluminum derailleur hanger, suitable for the following bicycle brands: Lapierre, Koga Material: AL 6061 aluminum, cold forged Delivery includes: derailleur hanger incl. mounting screw
This MARWI miscellaneous is designed for reliability and ease of use. Derailleur hanger Marwi GH-161 Trek. Marwi other. Derailleur hanger Marwi GH-161 Trek Aluminum derailleur hanger, suitable for the following bicycle brands: Trek Material: AL 6061 aluminum, cold forged Delivery includes: derailleur hanger incl. mounting screw
This MARWI miscellaneous is designed for reliability and ease of use. Derailleur hanger Marwi GH-159 Specialized. Marwi other. Derailleur hanger Marwi GH-159 Specialized Aluminum derailleur hanger, suitable for the following bicycle brands: Specialized Material: AL 6061 aluminum, cold forged Delivery includes: derailleur hanger incl. mounting screw
This MARWI miscellaneous is designed for reliability and ease of use. Derailleur hanger Marwi GH-158 Cervelo. Marwi other. Derailleur hanger Marwi GH-158 Cervelo Aluminum derailleur hanger, suitable for the following bicycle brands: Cervelo Material: AL 6061 aluminum, cold forged Delivery includes: derailleur hanger incl. mounting screw
This MARWI miscellaneous is designed for reliability and ease of use. Derailleur hanger Marwi GH-155 Orbea. Marwi other. Derailleur hanger Marwi GH-155 Orbea Aluminum derailleur hanger, suitable for the following bicycle brands: Orbea Material: AL 6061 aluminum, cold forged Delivery includes: derailleur hanger incl. mounting screw
This MARWI miscellaneous is designed for reliability and ease of use. Derailleur hanger Marwi GH-136 Giant. Marwi other. Derailleur hanger Marwi GH-136 Giant Marwi offers a wide range of gear hangers (derailleur rear dropouts) that fit most bicycles equipped with a derailleur gear system. Gear hangers are designed to bend or break, preventing damage to the frame in the event of a fall. Therefore, gear hangers are originally made of 6061 cold-forged aluminum. There are many different models of gear hangers. This is because the design of the gear hanger is related to the design of the frame's dropout section. All Marwi gear hangers are 100% identical to the original gear hanger on your bicycle. And that's precisely why a Marwi gear hanger is the safest choice. This frame hanger/derailleur hanger fits the following bicycle brands: - Giant
Very nice BMX / Freestyle pedal from Marwi. Details: Body: made of extruded aluminum, CNC machined Weight: 306 grams Body thickness: 10 mm (excl. spikes) extra thin!! Dimensions: 104 x 100 mm Bearings: - Inside 3 x cartridge bearings - Outside 1 x thrust bearing (ensures durable stability both horizontally and laterally) Axle: CrMo steel Adjustable: yes Spare parts: 2 x end caps (plastic) and 2 x spikes (allen key and technical drawing/instructions are included) Packaging: luxury display box Extremely suitable for the freestyle and ATB target group
