CYCLUS TOOLS Brake Disc Tester
With the CYCLUS TOOLS brake rotor tester, bike owners and mechanics can quickly and easily determine when it's time to replace the brake rotor. This is important for preventing unexpected brake problems and ensuring safe and reliable braking.
Regular checks with this tester ensure that the brake disc is in perfect condition and maximizes its lifespan. Each brake disc has a wear limit specified by the manufacturer ( MIN TH = Minimum Thickness ). This value must not be exceeded, otherwise braking performance will be reduced and the cyclist's safety will be compromised.
Most brake rotors are marked by the manufacturer with a wear limit. For example: Shimano Min th = 1.5.
Operation
The brake disc to be tested must be clean to avoid affecting the test result. Set the tester to the manufacturer's specified wear limit (MIN TH). Then use the locking wheel. Then, place the tester's probes on the brake surface, ensuring they are roughly perpendicular to the brake disc. Avoid testing near holes or slots. Fully depress the probe and read the wear reserve on the scale. Check at several positions to ensure accurate results.
The tester indicates how much wear reserve your brake disc has (in 0.1 mm increments). The "STOP" position indicates that the brake disc needs to be replaced.
Important note
Brake disc manufacturers specify a wear limit ( MIN TH ) that must not be exceeded at any point. If the minimum thickness is exceeded, braking function, and therefore safety, is no longer guaranteed.
New brake pads may only be fitted if the minimum thickness is not exceeded.
Cyclus Combination Pliers, NiCr, ergonomic handle
4-point vice pipe hole Front Grip function
Power connection mechanism
NiCr, 3-component handle
Side handle function
This Cyclus remover is suitable for mounting and removing a lockring for Shimano direct-mount chainrings. The remover is suitable for the SLX FC-M7100 / FC-M7120 / FC-M7130, XT FC-M8100 / FC-M8120 / FC-M8130, XTR FC-M9100 / FC-M9120 series.
Cyclus T47 standard bottom bracket casing, pair.For use with tool 7720151.T47 combines BSA and large bottom bracket bearings.Suitable for diameter 46 mm, e.g. PressFit 30.Also BBRIGHT PressFit, 386EVO, OSBB.Milling allows for flat bottom bracket surfaces.This ensures the bottom bracket can be securely screwed into the frame.Correct operation only on metal frames.Not every frame is suitable for this operation.Consult the frame manufacturer for advice if necessary.For complete tool, item 7720151 is required.
COLOR: SILVER
Material: metal
BRAND NAME: CYCLUS
CUSTOMER GROUP: UNI
KEYWORD: FACE MILL
Standard T47 taps for bottom bracket shells.Replacement pair for tool 7720151.T47 combines BSA and large bearings.Suitable for 46 mm bearings.E.g. PressFit 30, BBRIGHT, 386EVO, OSBB.These taps create an internal thread.Allows mounting of bearings like BSA.Use only on metal bottom bracket shells.Be careful with glued or laminated bushings.Not all frames are suitable.Ask the manufacturer for advice if needed.Cyclus T47 standard taps, spare pair.For use with tool 7720151.T47 combines BSA and large bearings.Suitable for 46 mm diameter bearings.E.g. PressFit 30, BBRIGHT, 386EVO, OSBB.Taps allow you to create internal threads.Enables mounting of bottom bracket bearings like BSA.Use only on metal housings.Be careful with glued metal bushings.Not every frame is suitable for this conversion.Ask the frame manufacturer for advice if needed.
COLOR: SILVER
Material: metal
BRAND NAME: CYCLUS
CUSTOMER GROUP: UNI
KEYWORD: TOOL
The Cyclus Tools wheel truing stand is designed for permanent mounting in the workbench. It allows testing of vertical and horizontal wheel run-out. Wheels with all axle types can be clamped using the synchronously moving clamping arms. This enables quick, precise and user-friendly work on wheels. Special feature: wheels with mounted tires, up to 29", can also be trued without problems. Supports tires up to a width of 2.6". Locking mechanism Ease of use is completed by the new sensors with locking mechanism. This ensures quick and easy mounting and dismounting of the wheel by simply opening the sensors with the lever. The lever is locked in the open position by a spring mechanism, allowing you to mount the wheel in the stand without it scratching the spokes. Simply unlock the sensors' locking mechanism and you can start truing. Features: - Professional workshop version - Control of vertical and horizontal deviations - Synchronously movable clamping arms - Measuring sensors with locking mechanism - Truing wheels with tires - Clamping of all common axle systems - Maximum hub width 260 mm - Dimensions: approx. 33.5 x 53 x 40 cm Contents: - Truing stand with sensor module including locking mechanism, for truing with/without mounted tires 24" to 29" / max. 2.6" tires - 2x Plastic measuring sensors - Thru axle adapters up to 24 mm diameter, HH12, HH15, HH20 Boost
