CYCLUS TOOLS snap.in bottom bracket remover, compatible with: SRAM DUB SN. 13-ik For a functional tool, you still need holder item no.:7202750 and possibly additional parts such as an adapter or a guide. Please note the tightening torque specified by the manufacturer for each bottom bracket assembly.
CYCLUS TOOLS snap.in bottom bracket puller, compatible with: FSA MegaEVO bottom bracket (guide bolt SN-77-F item no.: 7202777). TOKEN Ninja BB386 For a functional tool, you still need the holder item no.: 7202750, and the guide bolt SN-77-F (Art.-No.: 7202777) is also recommended. With this combination of holder, puller and the matching guide, professional assembly and disassembly of the bottom bracket is possible without slipping and tilting. Another advantage is that this guide can also be used with other tools from the snap.in range. Please observe the tightening torque specified by the manufacturer for each bottom bracket.
The lockring remover is used for mounting and dismounting Shimano Steps 8000 E-bike motor lockrings. To ensure that the required torque forces are safely transferred, the tool is secured in the motor axle by the integrated guide and connected to the lockring by means of a pull-push mechanism. The teeth are designed in a reinforced shape, thicker than usual. This way, the tool can deliver high torque when loosening or tightening the lockring, guaranteed without slipping. The tool can be used in combination with snap.in tool holder (art. 7202750) or 32 mm combination wrench. When tightening, observe the tightening torque recommended by the manufacturer. Use a 3/8" torque wrench (art. 720115) to check the torque. Note! The lockring remover cannot be used with power tools.
CYCLUS TOOLS snap.in Pinion gearbox lockring tool, compatible with: Pinion gearbox C-Line Pinion gearbox P-Line The lockring remover is used for mounting and dismounting Pinion gearbox C- and P-Line lockrings. To ensure that the required torques are safely transmitted, the tool is secured in the motor shaft by the integrated guide and connected to the lockring by means of a push-pull mechanism. In this way, the tool can deliver high torque when loosening or tightening the lockring, guaranteed without slipping. The tool can be used in combination with a snap.in tool holder (art. 7202750) or a 32 mm combination wrench. When tightening, observe the tightening torque recommended by the manufacturer. Use a 3/8" torque wrench (art. 720115) to check the torque. Note! The lockring remover cannot be used with power tools.
CYCLUS TOOLS snap.in bottom bracket remover, compatible with: SHIMANO Hollowtech II (guide pin SN-73-F Art. No.:7202773) MICHE EVO Max (guide pin SN-73-F Art. No.:7202773) CAMPAGNOLO Ultra and Power Torque (guide pin SN-74-F Art. No.:7202774) SRAM GXP (guide pin SN-75-F Art. No.:7202775) SHIMANO Disc Brake Lock Ring with 20 mm/15 mm E-thru Axle. For a functional tool, you also need holder art. no.:7202750 and possibly additional parts such as an adapter or a guide. It is recommended to use the snap.in guide pin SN-73-F (art. no.: 7202773), SN-74-F (art. no.: 7202774) or the guide pin SN-75-F (art. no.: 7202775). With this combination of holder, remover and the correct guide, professional assembly and disassembly of the bottom bracket is possible without slipping and tilting. Another advantage is that it can also be used with other tools in the snap.in family. Please observe the tightening torque specified by the manufacturer for each bottom bracket.
With the freewheel removal tools from Cyclus Tools®, both cassettes and freewheels can be easily removed. The key is attached to the cassette from above or below. Since a chain is no longer used, the key does not slip sideways, allowing it to transmit greater force and easily remove the cassette.
The Cyclus Chaincut'r counter and splitter is suitable for chains from BMX to 12-speed. It counts the desired number of chain links and then shortens the chain. For fixed mounting on a workbench.
