Fast CDI for SYM MIO 4T E2, adjustable via remote control. Variable restricted speed adjustable between 0-the maximum speed of the scooter via the remote control, so no more adjusting screw. Operation: (+) button = speed up (-) button = speed down (+ and -) pressed simultaneously = unrestricted! Engine off and on (even while driving!) then restricted again. Engine does not need to shut down! Suitable for: SYM MIO 4T E2
Adjustable Remote Limiter for SYM MIO 50i Injection E4 (remote control). Variable limited speed adjustable between 0 and the maximum speed of the scooter concerned (50-55). For fast mode, use the remote control; for slow mode, turn the ignition off and on (can be done while riding). PLEASE NOTE! This kit is not for increasing performance; for that, the smooth bushing and pink wire near the ignition switch must be cut.
Fits on, among others:Kymco Activ 50 4T Kymco Agility 10 inch 50 4T Kymco Agility 12 inch 50 4T Kymco Agility 125Kymco Agility 16+Kymco Agility Carry 50 4T 2018-> Euro 4Kymco Agility Carry 50 4T Kymco Agility Delivery 50 4T 2018-> Euro 4Kymco Agility Delivery 50 4T Kymco Agility Fat 12 inch 50 4T Kymco Agility RS 12 inch 50 4T Kymco DJ 50 AC 2TKymco E-vitalityKymco New Like 50 4T 2018-> Euro 4ro4Kymco People 50 2TKymco People One 125iKymco People S 50 4T Kymco People S 50 50 4T Kymco Super 8 2007-2009Kymco Super 8 2009->Kymco Super 8 Street 50 4T 2018-> Euro 4Kymco Super 8 Street 50 4T Kymco Super 9 50 AC 2TKymco Super 9 50 LC 2TKymco Vitality 50 AC 2T 2004-2017Kymco Vitality 50 AC 4T 2004-2017Kymco Yup 50 2T
This complete 10-piece fairing set from EDGE is specifically designed for the Sym Mio scooter and comes in various colors. The set offers the same quality and fit as the original Sym Mio fairing set, but is considerably more affordable. The set is compatible with both Sym Mio 2-stroke and 4-stroke models and includes the following components: Front mudguard
Steering cover
Left lower fairing spoiler, positioned under the running board and connecting to the lower front fender Right lower fairing spoiler, also under the running board with connection to the lower front fender
Left side shield, which runs along the bottom of the saddle
Right side panel, positioned identically to the left side panel
Upper front fender, which is attached around the headlight
Lower front fender, through which the front fork extends and connects to the lower spoiler
Left front fender cover, located below the turn signals and between the upper and lower front fenders
Right front fender cowl, similarly positioned as the left cowl. Note: This set only includes the painted outer cowl parts. Inner cowl parts such as the running board and leg shield are not included and must be purchased separately if necessary. Original stickers and mounting hardware such as self-tapping screws and speed nuts are not included. Additional logos for the handlebar cowl and side skirts are available separately, which can be a nice addition.
10-piece cover set suitable for the Sym Mio This cover set consists of the following 10 parts: Front mudguard
Steering cover
Left under-fairing spoiler. This cover is located under the running board and connects to the lower front fender.
Right side under-fairing spoiler. This cover is located under the running board and connects to the lower front fender.
Side panel left and right
Front fender above. This is the cover that surrounds the headlight.
Front fender below.
Intermediate cover at front fender Left and Right
This other one from EDGE is finished in matte gray. Ideal for everyday use and of high quality. 10-piece Edge plate set for Sym Mio - matte gray. Edge other gray, matte. 10-piece Edge plate set for Sym Mio - matte gray This complete 10-piece fairing set from the EDGE brand is specifically designed for the Sym Mio scooter and is available in various colours. The set offers the same quality and fit as the original Sym Mio fairing set, but is considerably more affordable. The set is compatible with both the Sym Mio 2-stroke and 4-stroke models and includes the following parts: Front mudguard Handlebar cover Left lower fairing spoiler, positioned underneath the footboard and connecting to the lower front fender Right lower fairing spoiler, also underneath the footboard and connecting to the lower front fender Left side fender, which runs along the underside of the saddle Right side fender, positioned identically to the left side fender Upper front fender, which is attached around the headlight Lower front fender, through which the front fork passes and connects to the lower spoiler Left front fender intermediate cover, positioned underneath the turn signals and between the upper and lower front fenders Right front fender intermediate cover, positioned similarly to the left intermediate cover Please note: this set only contains the painted outer fairing parts. Interior cowling parts such as the running board and leg shield are not included and must be purchased separately if needed. Original stickers and mounting hardware such as self-tapping screws and speed nuts are not included. Additional logos for the handlebar cowling and side skirts are available separately, which can be a nice addition.
This other one from EDGE is finished in black. Ideal for everyday use and of high quality. Sym mio inner screen black. Edge rest black. Sym mio black inner screen This black inner cover can be fitted directly to the Sym Mio and is a cost-effective alternative to cracks or damage to the original cover.
![flasher relay DMP aerox va2002, amico, f12, f15, mio, nrg, primavera, sprint, sr lc, sr nt, sr ot, typhoon, zip, zip 4t [euro4]](//toptierparts.nl/cdn/shop/files/32476.jpg?v=1770912065&width=645)
![flasher relay DMP aerox va2002, amico, f12, f15, mio, nrg, primavera, sprint, sr lc, sr nt, sr ot, typhoon, zip, zip 4t [euro4]](http://toptierparts.nl/cdn/shop/files/32476.jpg?v=1770912065&width=645)
