This VARTA miscellaneous is designed for reliability and ease of use. Battery VARTA Longlife Alkaline LR61 - 9V. Varta other. Battery VARTA Longlife Alkaline LR61 - 9V Powerful and reliable 9 V battery. The ideal alkaline battery for continuous load in the low consumption class, for example in remote controls, smoke detectors, clocks, calculators, electronic scales, etc. Highlights Ideal for devices with low power consumption Durable and reliable Temperature range -10 to +50 °C Dimensions: - Width: 25.5 mm - Height: 48.5 mm - Depth: 16 mm Size: 9 V (block) Technology: Alkaline Voltage: 9 Volt Capacity: 565 mAh
Neoprene battery cover
Suitable for Bosch Active and
Performance Line carrier battery
To protect the battery against cold,
shocks and damage
4.5mm thick
Neoprene battery cover
Suitable for Bosch Active and
Performance Line carrier battery
To protect the battery from the cold,
shocks and damage
4.5mm thick
This universal test cable can be used for
batteries where a voltage source can be measured.
Ends of this cable are 3mm.
Suitable for TranzX batteries, among others.
and Bikkel intube batteries NO STENZA
Drill/screw max diameter 7 mm
Battery voltage 12 V
Battery type Li-Ion
Number of courses 2
Torque adjustable steps 21
Chuck clamping range 1 - 10 mm
Drill chuck type SSBK (Quick-release drill chuck)
Drill diameter wood 19 mm
Drill diameter in steel 10 mm
No-load speed (1.G) 0 - 400 r/min
No-load speed (2.G) 0 - 1300 r/min
Max. tightening torque (hard screw connection) 30 N/m
Max. tightening torque (soft screw connection) 15 N/m
Thread type, nominal diameter 1/2 "
Drill spindle thread, thread pitch 21
Dimensions 169 x 178 x 55 mm
Weight (incl. battery) 0.950 kg
Without battery and charger.
Please note that this drill is supplied without a battery and
accessories supplied
Amperomatic Digit Pro, smart battery charger, 12V - 4.2A Art.70209 For all types of batteries. Fully sealed ABS housing (IP65) With desulfation function that allows you to restore battery functionality, extending its life and eliminating the need for premature replacement With spark protection, short-circuit and polarity protection, with temperature and voltage compensation Microprocessor with 4 different charging modes Battery clips and M6 eyelet Approval: IP65; RAEE; RoHS; CE
Charges and maintains 6V-12V STD, AGM, GEL lead-acid batteries and 12V LiFePO4 batteries. 1A charging current with battery capacity up to 20Ah (maintains all sizes). 4 charging modes. Easy to set up and use: connect, select a charging mode and let it charge. Easy-to-read LED display. Fully protected against short circuits, incorrect connections, overcharging and overheating. IP6X
This VARTA miscellaneous is designed for reliability and ease of use. VARTA Longlife Alkaline LR20 battery (2x). Varta other. Battery VARTA Longlife Alkaline LR20 (2x)
This VARTA miscellaneous is designed for reliability and ease of use. VARTA Longlife Alkaline LR14 C battery (2x). Other Varta batteries. Battery VARTA Longlife Alkaline LR14 C (2x)
PC 12-03 Lithium battery charger 12 volt and 3 amp. This battery charger is specially designed to charge lithium batteries. This is the ideal charger for 7.5 Ah, 12 Ah and 20 Ah lithium batteries. The charger automatically switches off after the battery is fully charged. PLEASE NOTE! This is a battery charger for lithium batteries, so it is not suitable for lead-acid, AGM, GEL etc. Features: Lithium battery charger For 12 volt lithium batteries For batteries from 6 to 20 ah Suitable for Lithium batteries NOT for lead-acid, AGM, GEL etc. Easy operation Cable with 2 clamps
The fender-mounted Retro is specially developed for retro and classic bicycles. A strong mix of the classic mounting method and a modern look. The Retro is easy to operate with a push button and is available with a red casing. Light: 500 meters visibility Safety 1 high power LED, more than 50,000 hours lifespan Comfort Easy to operate push button Choice of a white or red casing Technology Battery operated Battery life 70 hours Includes 2 AAA LR03 batteries
This battery acid contains 37% sulfuric acid and is suitable for all brands of batteries. Always use demineralized water to fill batteries. Lead-acid batteries are filled with sulfuric acid with a density of 1.28 kg/l. Warning: This product is corrosive. Never add water to acid (always add acid to water). This acid can cause skin burns and degrade many materials. In case of skin contact, rinse immediately with plenty of water! In case of eye contact, rinse immediately with plenty of water and consult a doctor! Spilled battery acid should be rinsed away with plenty of water or can be neutralized with caustic soda. When charging a battery, explosive hydrogen gas is produced. A small spark is enough to cause the battery to explode. Place the battery in a well-ventilated area. Avoid sparks and open flames near the battery
This Van Beijck charger is the replacement for the Tranzx MDA 11542002000 5-pin XLR model. This charger is controlled by an MCU and can charge all types of lithium and lead batteries. TranzX Li-Ion 4-stage Van Beijck battery charger (replacement for the CH02 5-pin plug model) (This charger is only suitable for 36V Li-Ion TranzX batteries) 5-pin Tranzx model MDA 11542002000 charger is supplied in a Van Beijck housing and this charger is also equipped with smart charging technology. The charger is suitable for charging TranzX BL03, BL05, BL06, and BL07 batteries for electric bicycles, among others. The charger has a clear LED charging indicator. VanBeijck chargers typically have a 4-stage (Winter charger) charging characteristic. This results in better battery charging than with conventional chargers. This charger is used for Sachs - Winora - Victoria - Hercules - Staiger - Pegasus and Panther bicycles, among others. The product may differ from the photo; the technical specifications will always be the same. Technical specifications: Dimensions: 170mm x 70mm x 38mm Battery material: ABS Plastic Cooling: Passive Mains voltage: 110 - 230V Output voltage: 42V Maximum charging current: 4.0A Battery capacity: 7 - 20Ah Charging characteristic: 4 stages Li-Ion: Yes Charging plug: 5 Pin XLR Neutrik Suitable for: TranzX Li-Ion batteries
LED taillight specially designed for city, trekking and hybrid bikes. A battery-powered taillight for fender mounting. Equipped with a light sensor. Functions: 1 red LED for a bright light output and a light tunnel ensure visibility, even on both sides of the bike. Modern and innovative design. Integrated ON/AUTO/OFF switch on the back. Light output at an angle of 220 degrees or more, for optimal safety. Battery indicator. Technical information: Housing o The back is made of impact-resistant ABS. o The front is made of PMMA, with an integrated red reflector. o Splash and rain resistant. Seal ring. A rubber seal ring placed between both lamp housing parts, around the fender bolt, and around the screw connecting the two lamp parts, prevents splash or rainwater from entering. Stainless steel mounting material o 1 x M5 x 12mm bolts o 1 x washer o 1 x M5 lock nuts o 1 x M3 x 30mm screw (Phillips head) Auto "ON" function The taillight (when in "AUTO" mode) automatically turns on when the light sensor is activated (i.e., when it's dark) and the bike is in motion! Auto "OFF" function The taillight automatically turns off after 4 minutes of standstill in "AUTO" mode. Switch. Easy-to-operate AUTO/ON/OFF push-button switch, made of TPE (Thermo-Plastic-Elastomer), on the back of the taillight. By pressing the push-button once, the light, after flashing 3 times, enters "AUTO" mode. Pressing again puts the light in "ON" mode, and pressing once more turns the light "OFF". Batteries o Includes 2 x pre-assembled AAA alkaline or rechargeable batteries. o A plastic locking strip protects the battery from accidental power loss. Battery indicator. Looking at the taillight from the rear of the bike, a battery indicator is located on the right side of the taillight, which lights up yellow when activated. Replace or recharge the batteries as soon as possible after the battery indicator is activated. Burn time Up to 60 hours (depending on battery condition and ambient temperature). Reflectors. A reflector integrated into the lamp housing. Dimensions 48 x 65 x 40mm (width x height x thickness). Weight 65 gr (including batteries). Standards o Complies with CE standards. o The complete taillight is approved according to German "StVZO" (K 1326). (approval procedure in progress) o The reflector ("Z") complies with German "StVZO" standards and is approved according to ECE-R3 (IA-E1-024515). (approval procedure in progress) IMPORTANT: When the taillight is used with 2 rechargeable batteries (NiMH 1.2 Volt type and at least 600mAH each), it may be used on all bicycles according to German StVZO regulations. If the taillight is used with 2 alkaline batteries (1.5 Volt each), this taillight may only be used on racing bicycles with a total weight of max. 11 kilograms or as an additional (second) taillight on all bicycles, according to German StVZO regulations.
Stella bikes are widely distributed and popular in the Netherlands. It can happen that a charger stops working or breaks down, even with these bikes. We supply a replacement Stella charger of type 2, which has a 5-pin charging connector. This Stella charger has a charging speed of 2 amps, which means you can charge 2 amps per hour into your battery. Product specifications: Dimensions: 170 x 70 x 38 mm Material: ABS plastic Cooling: Passive Output voltage: 42.0V Maximum charging current: 2.0A Charging characteristic: 4 stages Application: Lithium-ion (Li-ion) Charging plug: 5-pin round plug Article number: 21119
This battery charger replaces the SSLC084V42XH model. This charger is controlled by an MCU and can charge all types of lithium batteries. 36V smart charger (Model 5-pin triangular charging plug) replacement charger for model SSLC084V42XH. Suitable for, among others, Stella type 2 and Fischer 36V Li-Ion batteries. The 5-pin Stella charger is supplied in a Van Beijck casing and features 4-stage smart charging technology. Please check the connector plug before ordering, as there are 2 types of chargers with the same model number. This charger can also be ordered optionally as a 4A fast charger. VanBeijck battery charger for charging a Stella type 2 Li-Ion 36-volt electric bicycle battery. The charger has a clear LED charging indicator. Van Beijck chargers always have a standard 4-stage (Winter Charger) charging characteristic. This means that batteries are charged better than with conventional chargers. This Stella battery charger is used for the following Stella models: Allegra, Avenza, Azzurro, Durante, Fiore, Forte, Giraldo, Livorno, Modena, Nantes, Novara, Sardena (from 2015), Verona, and Vicenza. The product may differ from the photo, but the technical specifications will always be the same. Dimensions 167mm x 69mm x 40mm Battery material ABS Plastic Cooling Passive Mains voltage 110V 240V Output voltage 42V Maximum charging current fast charger 4.0A Battery capacity 7 20Ah Charging characteristic 4 stages Winter Charger Li-Ion battery Yes Charging plug 5 pins Features: Suitable for 36V Stella type 2 batteries
