Original bearings to replace old Praxis M30 bearings. Suitable for M30 BSA, BB30/PF30, 386EVO, BBright, T47 EB and T47 IB. Note: not suitable for M30 BB96/90/92, the bearings of this BB cannot be replaced. Professional tools must be used to replace the bearings. If you do not have the correct tools, have these bearings replaced by a specialist. Set consists of 2 bearings (1x D30 and 1x D28) and a retaining clip.
Praxis bottom bracket adapter Shimano - BB30 PF30 MTB 73mm. Suitable for Shimano Hollowtech II steel spindle cranks, which must be installed on a frame with a BB30 or PF30 connection. The rubber expander allows the BB to be secured even more securely in the frame. Suitable for a 73mm mounting width (MTB). Includes high-quality Enduro 2437 bearings. Aluminum cups.
Praxis bottom bracket adapter Shimano - BB30 PF30 Road 68mm. Suitable for Shimano Hollowtech II steel spindle cranks, which must be installed on a frame with a BB30 or PF30 connection. The rubber expander allows the BB to be secured even more securely in the frame. Suitable for a 68mm mounting width (road). Includes high-quality Enduro 2437 bearings. Aluminum cups.
Praxis Shimano bottom bracket - BSA threaded MTB 68-73mm. Suitable for Shimano Hollowtech II cranks, which must be installed on a frame with BSA thread. Suitable for 68mm and 73mm mounting widths (MTB). Includes high-quality Enduro 2437 steel cartridge bearings. Aluminum cups.
Praxis Shimano bottom bracket - BSA Road 68mm thread. Suitable for Shimano Hollowtech II cranks, which must be installed on a frame with BSA thread. Suitable for a 68mm mounting width (road). Features high-quality Enduro 2437 steel cartridge bearings. Aluminum cups.
Praxis bottom bracket adapter Shimano - OSBB Road 68mm. Suitable for Shimano Hollowtech II steel spindle cranks, which must be installed on a frame with an OSBB connection. The rubber expander allows the BB to be secured even more securely in the frame. Suitable for a 68mm mounting width (road). Includes high-quality Enduro 2437 bearings. Aluminum cups. (For 2014 and earlier specialized frames only)
Praxis Shimano bottom bracket - T47 thread Road/MTB 68-73mm. Suitable for Shimano Hollowtech II cranks, which must be installed on a frame with T47 thread. Suitable for 68mm and 73mm mounting widths (road/MTB). Contains high-quality Enduro 2437 steel cartridge bearings. Aluminum cups.
Praxis M24 - BB86 BB90 BB92 Road/MTB Bottom Bracket. Suitable for Praxis M24 axles, which must be installed on frames with: BB86 Race/BMX or BB90/BB92 MTB. Drive-side bearing inner diameter is 24mm, non-drive-side bearing inner diameter is 22mm. Place the wave washer on the drive side. Contains high-quality Enduro steel cartridge bearings. Suitable for Praxis M24 crank axles and Oval Concepts M24 and Sram GXP cranks.
Praxis M24 Bottom Bracket - BSA Thread Road/MTB. Suitable for Praxis M24 crank axles, which must be installed on frames with BSA threads. Suitable for both 68mm and 73mm mounting widths (road and MTB). Drive-side bearing inner diameter is 24mm, non-drive-side bearing inner diameter is 22mm. Place the wave washer on the drive side. Contains high-quality Enduro steel cartridge bearings. Suitable for Praxis M24 crank axles and Oval Concepts M24 and SRAM GXP cranks.
Praxis bottom bracket adapter Sram GXP/M24 - BB30 PF30 Road 68mm. Suitable for Praxis M24 crank axle, Oval concepts M24 and Sram Gxp crank axle which must be installed on a frame with BB30 or PF30 connection. The rubber expander allows the BB to be fixed even tighter in the frame. Suitable for 68mm installation width (race). Contains quality bearings of the brand Enduro 2437 (drive) and 2237ER (non-drive). Aluminum cups.
Praxis M30 386EVO Road bottom bracket. Suitable for the Praxis M30 axle, which must be installed on a frame with a 386EVO connection. (Bottom bracket diameter: 46mm, width: 86.5mm). The inner diameter of the drive-side bearing is 30mm, and the inner diameter of the non-drive-side bearing is 28mm. Place the wave washer on the drive side. Contains high-quality Enduro-brand steel cartridge bearings.
Praxis M30 - BB30 and PF30 73mm MTB bottom bracket. Suitable for the Praxis M30 axle, which must be installed on a frame with a BB30 or PF30 connection. The rubber expander allows the BB to be secured even more securely in the frame. Suitable for a 73mm installation width (MTB). The drive-side bearing inner diameter is 30mm, and the non-drive-side bearing inner diameter is 28mm. Place the wave washer on the drive side. Contains high-quality Enduro brand bearings. Aluminum cups. Note: A special Praxis BB tool is required to install this BB.
Praxis M30 - BB30 and PF30 68mm Road Bottom Bracket. Suitable for the Praxis M30 axle, which must be installed on a frame with a BB30 or PF30 connection. The rubber expander allows the BB to be secured even more tightly in the frame. Suitable for a 68mm installation width (road). Internal diameter of the drive-side bearing is 30mm, internal diameter of the non-drive-side bearing is 28mm. Place the wave washer on the drive side. Contains high-quality Enduro brand bearings. Aluminum cups. Note: A special Praxis BB tool is required for installation of this BB.
Praxis bottom bracket adapter M30 BB86 Road/BMX BB90 BB92 MTB. Drive-side bearing inner diameter is 30mm, non-drive-side bearing inner diameter is 28mm. Place the wave washer on the drive side.
Praxis M30 Bottom Bracket - BBRight Road. Suitable for the Praxis M30 crank axle, which must be installed on a frame with a BBRight connection. The rubber expander allows the BB to be secured even more securely in the frame. The inner diameter of the drive-side bearing is 30mm, and the inner diameter of the non-drive-side bearing is 28mm. Place the wave washer on the drive side. Contains high-quality Enduro cartridge bearings. Aluminum cups. Note: A special Praxis BB tool is required for installation of this BB.
Praxis M30 bottom bracket - BSA thread Road/MTB. Suitable for the Praxis M30 axle, which must be installed on a frame with BSA thread. Suitable for both 68mm and 73mm mounting widths (road and MTB). The drive-side bearing inner diameter is 30mm, and the non-drive-side bearing inner diameter is 28mm. Place the wave washer on the drive side. Contains high-quality Enduro-brand bearings. Aluminum cups. Note: A special Praxis BB tool is required for installation of this BB.
Praxis bottom bracket M30 - T47 thread 85.5mm Road/MTB. Suitable for the Praxis M30 axle, which must be installed on a frame with a T47 thread. Internal Bearing. Drive-side bearing inner diameter is 30mm, non-drive-side bearing inner diameter is 28mm. Place the wave washer on the drive side. Contains high-quality Enduro brand bearings. Aluminum cups. Note: A special Praxis BB tool is required for installation of this BB.
Praxis M30 - T47 thread bottom bracket 68-73mm Road/MTB. Suitable for Praxis M30 axles, which must be installed on frames with T47 threads. Suitable for both 68mm and 73mm mounting widths (road and MTB). Drive-side bearing inner diameter is 30mm, non-drive-side bearing inner diameter is 28mm. Place the wave washer on the drive side. Contains high-quality Enduro brand bearings. Aluminum cups. Note: A special Praxis BB tool is required to install this BB.
Praxis M30 Thru - BB30 and PF30 MTB bottom bracket. Suitable for Praxis M30 Thru crank axles, which must be installed on a frame with a BB30 or PF30 connection. The rubber expander allows the BB to be secured even more tightly in the frame. Suitable for a 73mm installation width (MTB). Internal diameter of the drive-side bearing is 30mm, internal diameter of the non-drive-side bearing is 30mm. Place the wave washer on the drive side. Contains high-quality Enduro brand bearings. Aluminum cups. Note: A special Praxis BB tool is required to install this BB.
Praxis bottom bracket adapter M30-Thru BB86 Road BB90 BB92 MTB, both bearings have a 30mm inner diameter. Also suitable for 30mm cranks from other brands such as SRAM, RaceFace/Easton "Cinch" cranks, Rotor Rex/3D+ cranks, and CaneCreek eeWings.
Praxis M30 Thru Bottom Bracket - BSA Thread Road/MTB. Suitable for Praxis M30 Thru crank axle which must be installed on a frame with BSA thread. Praxis Doon and Lyft crank currently only uses M30 Thru; this BB is also suitable for RaceFace/Easton 'Cinch' cranks and Rotor Rex/3D+ cranks. Suitable for both 68mm and 73mm installation width (race and MTB). Internal diameter of the drive side bearing is 30mm, internal diameter of the non-drive side bearing is 30mm. Place the wave washer on the drive side. Contains high-quality Enduro brand bearings. Aluminum cups. Note: A special Praxis BB tool must be used to install this BB.
Bottom bracket type: JIS square
68mm
made of steel
Suitable for BSA threads
Suitable for ITA threads
Steel scales
Solid axle
also for defective threads
suitable for Shimano tools
Boron ash
Bottom bracket type: JIS square
68mm
made of steel
Suitable for BSA threads
Suitable for ITA threads
Steel scales
Solid axle
also for defective threads
suitable for Shimano tools
Boron ash
24mm axle thickness
Miche bottom bracket
BSA passing
suitable for 24mm axle (including Shimano)
Hollotech II with external bearings
Suitable for race/road/ATB/MTB
Color: black
