The SLA 12-4S motorcycle battery, 12 volts, 5 Ah, is a starter battery with AGM technology. The SLA 12-4S is factory-activated (filled and charged) and therefore ready for immediate use upon delivery. This lead-acid battery is leak-proof and maintenance-free. It can be mounted in a tilted position up to 90°. The SLA 12-4S is a true all-rounder and suitable for seasonal use and short distances. Technical specifications Volt (V) 12 Capacity (Ah) 5 (10hr) CCA (A/EN) 50 Length (mm) 113 Width (mm) 70 Height (mm) 85 Total height (mm) 85
The LTX7A-4 motorcycle battery, 12 volts, 7 Ah, is a starter battery with gel technology. The LTX7A-4 starter battery is factory activated (filled and charged) and therefore immediately ready for use. This gel battery is 100% leak-proof and can be mounted in a tilted position up to 90°. The LTX7A-4 delivers more starting power than a conventional battery and is suitable for modern motorcycles and powersport vehicles. Technical specifications Volt (V) 12 Capacity (Ah) 7 (10hr) CCA (A/EN) 125 Length (mm) 150 Width (mm) 87 Height (mm) 94 Total height (mm) 94
The LTX7L-BS motorcycle battery, 12 volts, 6 Ah, is a starter battery with AGM technology. The LTX7L-BS starter battery is dry pre-charged and comes standard with a suitable acid pack. This lead-acid battery, after filling and charging, is 100% maintenance-free and leak-proof. It can be mounted in a tilted position up to 45°. The LTX7L-BS is a true all-rounder and suitable for seasonal use and short distances. Technical specifications: Voltage (V) 12, Capacity (Ah) 6 (10hr), CCA (A/EN) 100, Length (mm) 113, Width (mm) 70, Height (mm) 130, Total height (mm) 130
Protect valuables on every motorcycle trip with a waterproof dry bag, specially designed for motorcyclists. Whether it's an adventurous ride through rainy weather or a journey on dusty roads, this dry bag is guaranteed to keep your belongings dry and dust-free. Suitable for use in top cases and side cases, this inner bag offers protection for up to 25 liters of luggage. Thanks to the compression valve, excess air can be easily removed from the bag, keeping it compact and saving space. The convenient roll-top closure on both sides allows for quick and easy access to luggage. Waterproof inner bag / dry bag.
Keep valuable luggage dry in top and side cases, etc.
For 25 liters of luggage. air can easily be 'squeezed' out using a compression valve.
Convenient roll-top closure on both sides.
Material: 65% TPU / 35% Polyester
Dimensions: 81x38 cm
Color: Black
Protect valuables on every motorcycle trip with a waterproof dry bag, specially designed for motorcyclists. Whether it's an adventurous ride through rainy weather or a journey on dusty roads, this dry bag is guaranteed to keep your belongings dry and dust-free. Suitable for use in top cases and side cases, this inner bag offers protection for up to 10 liters of luggage. Thanks to the compression valve, excess air can be easily removed from the bag, keeping it compact and saving space. The convenient roll-top closure on both sides allows for quick and easy access to your luggage. Waterproof inner bag / dry bag.
Keep valuable luggage dry in top and side cases, etc.
For 10 liters of luggage. air can easily be 'squeezed' out using a compression valve.
Convenient roll-top closure on both sides.
Material: 65% TPU / 35% Polyester
Dimensions: 60x35 cm
Color: Black
The DS COVERS luggage bag is the indispensable companion for any motorcycle holiday. The reliable roll-top closure and heat-sealed seams keep items dry and clean, no matter how spectacular the ride. Thanks to the universal attachment system of strong hooks and elastic straps, the bag fits effortlessly on (almost) any motorcycle and stays securely in place. Once at your destination, the bag is super easy and comfortable to carry thanks to the handles and an adjustable shoulder strap. Made of durable tarpaulin (92% PVC and 8% polyester), the bag allows you to confidently embark on your next motorcycle adventure, time and again, regardless of the (weather) conditions. Handy and flexible luggage bag for every motorcycle adventure.
Space for 60 liters of luggage.
Waterproof (IP X5) thanks to sturdy roll-top closure and thermo-sealed seams.
Easy to attach to the back of (almost) any motorcycle.
Equipped with multiple strong hooks/eyes. With strong elastic binders (2 pcs.) for fastening.
Easy to carry thanks to handles and adjustable shoulder strap.
Material: 92% PVC / 8% Polyester
Weight: 1,240 grams
Dimensions: 55x32x52 cm
Color: Black
The ALFA Topcase motorcycle cover is specifically designed for larger motorcycles with a top case. This cover has the same specifications as the regular ALFA motorcycle cover, with the added benefit of extra space at the rear where the top case is located. This allows the top case to remain on the motorcycle when the cover is in use. The ALFA Topcase cover is available in sizes L, XL, and XXL. Aside from the provision for the top case, the other dimensions are the same as the regular ALFA motorcycle cover. License plate window: When parking your motorcycle/scooter in public spaces, you must ensure the license plate is visible. Failure to do so may result in a fine. The ALFA motorcycle cover is also available with a license plate window specifically for this purpose. We provide model-specific sizing recommendations for the brands listed below. If your motorcycle is not listed, you can follow the measuring instructions to determine the correct size. Aprilia | BMW | Ducati | Harley Davidson | Honda | KTM | Kawasaki | Suzuki | Triumph | Yamaha Measuring Instructions Determine the size of the motorcycle cover by measuring the length, width, and height of your motorcycle and comparing them to the dimensions in the table below. The correct size is a cover length that is approximately 5-10 cm greater than the motorcycle length. For good ventilation, we recommend always letting the cover reach approximately 10-20 cm above the ground. This allows air to enter the cover from below and escape through the ventilation openings at the top. If in doubt between two sizes, choose the larger of the two. Because the hem is elasticated, the cover always fits well. Length | Width | Front Height | Back Height Size L 229 cm 99 cm 135 cm 125 cm Size XL 246 cm 104 cm 137 cm 127 cm Size XXL 264 cm 105 cm 140 cm 130 cm
The ALFA Topcase motorcycle cover is specifically designed for larger motorcycles with a top case. This cover has the same specifications as the regular ALFA motorcycle cover, with the added benefit of extra space at the rear where the top case is located. This allows the top case to remain on the motorcycle when the cover is in use. The ALFA Topcase cover is available in sizes L, XL, and XXL. Aside from the provision for the top case, the other dimensions are the same as the regular ALFA motorcycle cover. License plate window: When parking your motorcycle/scooter in public spaces, you must ensure the license plate is visible. Failure to do so may result in a fine. The ALFA motorcycle cover is also available with a license plate window specifically for this purpose. We provide model-specific sizing recommendations for the brands listed below. If your motorcycle is not listed, you can follow the measuring instructions to determine the correct size. Aprilia | BMW | Ducati | Harley Davidson | Honda | KTM | Kawasaki | Suzuki | Triumph | Yamaha Measuring Instructions Determine the size of the motorcycle cover by measuring the length, width, and height of your motorcycle and comparing them to the dimensions in the table below. The correct size is a cover length that is approximately 5-10 cm greater than the motorcycle length. For good ventilation, we recommend always letting the cover reach approximately 10-20 cm above the ground. This allows air to enter the cover from below and escape through the ventilation openings at the top. If in doubt between two sizes, choose the larger of the two. Because the hem is elasticated, the cover always fits well. Length | Width | Front Height | Back Height Size L 229 cm 99 cm 135 cm 125 cm Size XL 246 cm 104 cm 137 cm 127 cm Size XXL 264 cm 105 cm 140 cm 130 cm
The Edge body kit, suitable for Yamaha Aerox and Nitro models up to 2014, offers owners the chance to give their scooter a fresh look. With nine pieces included, you can replace damaged parts and add aesthetic upgrades. Thanks to its high-quality construction, this kit fits precisely and provides a professional finish. Give your scooter a fresh look on the road with the Edge body kit. This kit includes the following nine pieces: Front mudguard
Side panel (Z-plate): left and right
Engine screen: left and right
Forefront
Lower front
Front handlebar cover
Counter house
Complete 5-piece fairing set suitable for Piaggio Zip-SP. This set fits both 2-stroke and 4-stroke models from 2000 onwards. It includes a Zip SP front fender. This set includes the following parts: Forefront
Front mudguard
Side screens in one piece
Steering cover
Front grille on top
Complete 5-piece fairing set suitable for Piaggio Zip-SP. This set fits both 2-stroke and 4-stroke models from 2000 onwards. It includes a Zip SP front fender. This set includes the following parts: Forefront Front mudguard
Side screens in one piece
Steering cover
Front grille on top
Complete 5-piece fairing set suitable for Piaggio Zip-SP. This set fits both 2-stroke and 4-stroke models from 2000 onwards. It includes a Zip SP front fender. This set includes the following parts: Forefront
Front mudguard
Side screens in one piece
Steering cover
Front grille on top
Complete 5-piece fairing set suitable for Piaggio Zip-SP. This set fits both 2-stroke and 4-stroke models from 2000 onwards. It includes a Zip SP front fender. This set includes the following parts: Forefront
Front mudguard
Side screens in one piece
Steering cover
Front grille on top
Complete 5-piece fairing set suitable for Piaggio Zip-SP. This set fits both 2-stroke and 4-stroke models from 2000 onwards. It includes a Zip SP front fender. This set includes the following parts: Forefront
Front mudguard
Side screens in one piece
Steering cover
Front grille on top
The Gilera Runner body panel replacement kit, manufactured between 08 and 2005, is specifically designed to replace the exterior panels of the Gilera Runner scooter. The kit consists of high-quality panels that are easy to install. It's an ideal solution for repairing damaged or worn body panels. This kit includes various panels specifically designed for Gilera Runner models manufactured between 2005 and 2008. The following is a description of the parts included in the kit: Front mudguard
Front cover - Middle
Front cover - Left
Front cover - Right
Steering cover
Counter face
Radiator front grille - Left
Radiator front grille - Right
Side panel - Left
Side screen - Right
Rear cover between rear fenders
Duo handle
Battery cover
Right running board
Running Board Left This set fits the following models:
Gilera Runner 50 (until Bj. 1999)
Gilera Runner 50 (1999 - 2000)
Gilera Runner 50 (2004 - 08/2005) Gilera Runner Cat 50 (2001 - 2004)
Gilera Runner Purejet 50 (up to 08/2005) It's important to note that the availability of specific plates in the set may vary depending on the Gilera Runner model and version. It's recommended to purchase the set from a reputable supplier who specifically states that the plates are suitable for models up to and including 08/2005. This ensures a perfect fit for your specific scooter.
The Gilera Runner body panel replacement kit, manufactured between 08 and 2005, is specifically designed to replace the exterior panels of the Gilera Runner scooter. The kit consists of high-quality panels that are easy to install. It's an ideal solution for repairing damaged or worn body panels. This kit includes various panels specifically designed for Gilera Runner models manufactured between 2005 and 2008. The following is a description of the parts included in the kit: Front mudguard
Front cover - Middle
Front cover - Left
Front cover - Right
Steering cover
Counter face
Radiator front grille - Left
Radiator front grille - Right
Side panel - Left
Side screen - Right
Rear cover between rear fenders
Duo handle
Battery cover
Right running board
Running Board Left This set fits the following models:
Gilera Runner 50 (until Bj. 1999)
Gilera Runner 50 (1999 - 2000)
Gilera Runner 50 (2004 - 08/2005) Gilera Runner Cat 50 (2001 - 2004)
Gilera Runner Purejet 50 (up to 08/2005) It's important to note that the availability of specific plates in the set may vary depending on the Gilera Runner model and version. It's recommended to purchase the set from a reputable supplier who specifically states that the plates are suitable for models up to and including 08/2005. This ensures a perfect fit for your specific scooter.
The Gilera Runner body panel replacement kit, manufactured between 08 and 2005, is specifically designed to replace the exterior panels of the Gilera Runner scooter. The kit consists of high-quality panels that are easy to install. It's an ideal solution for repairing damaged or worn body panels. This kit includes various panels specifically designed for Gilera Runner models manufactured between 2005 and 2008. The following is a description of the parts included in the kit: Front mudguard
Front cover - Middle
Front cover - Left
Front cover - Right
Steering cover
Counter face
Radiator front grille - Left
Radiator front grille - Right
Side panel - Left
Side screen - Right
Rear cover between rear fenders
Duo handle
Battery cover
Right running board
Running Board Left This set fits the following models:
Gilera Runner 50 (until Bj. 1999)
Gilera Runner 50 (1999 - 2000)
Gilera Runner 50 (2004 - 08/2005) Gilera Runner Cat 50 (2001 - 2004)
Gilera Runner Purejet 50 (up to 08/2005) It's important to note that the availability of specific plates in the set may vary depending on the Gilera Runner model and version. It's recommended to purchase the set from a reputable supplier who specifically states that the plates are suitable for models up to and including 08/2005. This ensures a perfect fit for your specific scooter.
The Gilera Runner body panel replacement kit, manufactured between 08 and 2005, is specifically designed to replace the exterior panels of the Gilera Runner scooter. The kit consists of high-quality panels that are easy to install. It's an ideal solution for repairing damaged or worn body panels. This kit includes various panels specifically designed for Gilera Runner models manufactured between 2005 and 2008. The following is a description of the parts included in the kit: Front mudguard
Front cover - Middle
Front cover - Left
Front cover - Right
Steering cover
Counter face
Radiator front grille - Left
Radiator front grille - Right
Side panel - Left
Side screen - Right
Rear cover between rear fenders
Duo handle
Battery cover
Right running board
Running Board Left This set fits the following models:
Gilera Runner 50 (until Bj. 1999)
Gilera Runner 50 (1999 - 2000)
Gilera Runner 50 (2004 - 08/2005) Gilera Runner Cat 50 (2001 - 2004)
Gilera Runner Purejet 50 (up to 08/2005) It's important to note that the availability of specific plates in the set may vary depending on the Gilera Runner model and version. It's recommended to purchase the set from a reputable supplier who specifically states that the plates are suitable for models up to and including 08/2005. This ensures a perfect fit for your specific scooter.
The Gilera Runner body panel replacement kit, manufactured between 08 and 2005, is specifically designed to replace the exterior panels of the Gilera Runner scooter. The kit consists of high-quality panels that are easy to install. It's an ideal solution for repairing damaged or worn body panels. This kit includes various panels specifically designed for Gilera Runner models manufactured between 2005 and 2008. The following is a description of the parts included in the kit: Front mudguard
Front cover - Middle
Front cover - Left
Front cover - Right
Steering cover
Counter face
Radiator front grille - Left
Radiator front grille - Right
Side panel - Left
Side screen - Right
Rear cover between rear fenders
Duo handle
Battery cover
Right running board
Running Board Left This set fits the following models:
Gilera Runner 50 (until Bj. 1999)
Gilera Runner 50 (1999 - 2000)
Gilera Runner 50 (2004 - 08/2005) Gilera Runner Cat 50 (2001 - 2004)
Gilera Runner Purejet 50 (up to 08/2005) It's important to note that the availability of specific plates in the set may vary depending on the Gilera Runner model and version. It's recommended to purchase the set from a reputable supplier who specifically states that the plates are suitable for models up to and including 08/2005. This ensures a perfect fit for your specific scooter.
The Gilera Runner body panel replacement kit, manufactured between 08 and 2005, is specifically designed to replace the exterior panels of the Gilera Runner scooter. The kit consists of high-quality panels that are easy to install. It's an ideal solution for repairing damaged or worn body panels. This kit includes various panels specifically designed for Gilera Runner models manufactured between 2005 and 2008. The following is a description of the parts included in the kit: Front mudguard
Front cover - Middle
Front cover - Left
Front cover - Right
Steering cover
Counter face
Radiator front grille - Left
Radiator front grille - Right
Side panel - Left
Side screen - Right
Rear cover between rear fenders
Duo handle
Battery cover
Right running board
Running Board Left This set fits the following models: Gilera Runner 50 (until Bj. 1999)
Gilera Runner 50 (1999 - 2000)
Gilera Runner 50 (2004 - 08/2005)
Gilera Runner Cat 50 (2001 - 2004)
Gilera Runner Purejet 50 (up to 08/2005) It's important to note that the availability of specific plates in the set may vary depending on the Gilera Runner model and version. It's recommended to purchase the set from a reputable supplier who specifically states that the plates are suitable for models up to and including 08/2005. This ensures a perfect fit for your specific scooter.
Complete 7-piece hood set in white . Fits the following models: MRT Enduro 50 2T (2009 to 2017)
MRT Enduro 50 2T (from 2018)
MRT PRO Enduro 50 2T (2009 to 2017)
MRT PRO SM 50 2T (2009 to 2017)
MRT SM 50 2T (2009 to 2017)
MRT SM 50 2T (from 2018)
The 14-piece Peugeot Speedfight body panel replacement kit is a package specifically designed to replace the exterior panels of the Speedfight scooter. This kit includes several panels in multiple colors, giving you the opportunity to customize the look of your scooter. Below is a description of the parts included in the kit: Front cowl: This is the panel that covers the front of the scooter, including the headlight and dashboard. It is often considered the face of the scooter. Side guards: These panels cover the sides of the scooter and run from front to rear. They contribute to the scooter's aerodynamics and protect internal components. Rear cowl: This is the panel that covers the rear of the scooter and protects the taillights and rear wheel. Front mudguard: This is the panel located above the front wheel and protects against mud and water splashed by the wheel. Rear mudguard: This is the panel located above the rear wheel and also protects against mud and water. Seat cover: This is the plate that covers the seat and protects the scooter's seating area. Fuel tank cover: This is the plate that covers the fuel tank and protects it from damage. This kit includes plates in multiple colors, giving you the option to match your scooter's color scheme or replace damaged ones. It's a handy solution if you want to update the look of your Peugeot Speedfight. It's recommended to install according to the manufacturer's instructions or with the help of an experienced technician to ensure a perfect fit and finish.
Complete 9-piece fairing set for the Peugeot New Vivacity. A striking design with a perfect fit. This Edge fairing set for a Peugeot New Vivacity allows you to create a striking yet stylish design. It's also virtually indistinguishable from the original fairing set for a Peugeot New Vivacity. This set fits both 2-stroke and 4-stroke models. This set consists of the following 9 pieces: Steering cover
Forefront
Front mudguard
Side panel left
Side panel right
Protective cover for
Bottom screen left
Bottom screen right
Rear screen
Complete 9-piece fairing set for the Peugeot New Vivacity. A striking design with a perfect fit. This Edge fairing set for a Peugeot New Vivacity allows you to create a striking yet stylish design. It's also virtually indistinguishable from the original fairing set for a Peugeot New Vivacity. This set fits both 2-stroke and 4-stroke models. This set consists of the following 9 pieces: Steering cover
Forefront
Front mudguard
Side panel left
Side panel right
Protective cover for
Bottom screen left
Bottom screen right
Rear screen
Complete 6-piece hood set for the Peugeot Vivacity Sportline. A striking design with a perfect fit. This Edge hood set for a Peugeot Vivacity Sportline allows you to create a striking yet stylish design. It's also virtually indistinguishable from the original hood set for a Peugeot Vivacity Sportline. This set consists of the following 6 pieces: Forefront
Front mudguard
Side covers Left and Right
Lower front
Steering wheel cover. Please note: This cover set is only suitable for the Peugeot Vivacity Sportline. It can be installed on the Peugeot Vivacity Basic, but for mounting the front fender, it must be supplemented with the fender mounting bracket. You can also find this in our webshop.
Enhance your Vespa with this matte black trim strip for the leg shield/footboard. Suitable for the Vespa Primavera and Sprint. The Vespa Primavera and Sprint come standard with four trim strips: a left and right trim strip around the footboard, continuing into a left and right trim strip around the leg shield, and finally a center piece. This set consists of a complete left and right half for the leg shield, footboard, and center piece.
Transform your Yamaha Jog-R or MBK MachG with the versatile Edge body kit. Not only a performance and aesthetic upgrade, but also a perfect replacement for damaged parts. Easy installation, instant style upgrade. Choose Edge and give your scooter a modern look. It includes the following parts: Steering cover
Front fender top - bottom
Front mudguard
Under spoiler left - right
Side cover left - right This set of fairings fits both the air-cooled and water-cooled Yamaha Jog R This set fits the following models:
Yamaha Jog RA/C
Yamaha Jog RR L/C
MBK Mach GA/C
MBK Mach GL/C
7-Piece Fairing Kit for Yamaha Neos with digital dashboards from 2002 to 2008. This set includes the following 7 parts: Steering cover
Front fender
Front fender bottom
Rear fender left
Rear fender right
Front mudguard
Rear fender intermediate cover
9-piece set of parts suitable for Yamaha Neos and MBK Ovetto models manufactured between 2008 and 2011. This set consists of the following 9 parts: Steering cover
Front fender
Front fender bottom left and right
Rear fender left
Rear fender right
Front mudguard
Lower side skirt cover Left and Right
The Edge side panel set, consisting of four pieces, is designed to fit perfectly on Piaggio Zip and Zip 2000 models, while preserving the original style. The side panel set is made of high-quality, durable, and slightly elastic material. Furthermore, the paint and fit are identical to the original. This set includes the following parts: Forefront
Steering cover
Front mudguard
Side screens in one piece
The Edge side panel set, consisting of four pieces, is designed to fit perfectly on Piaggio Zip and Zip 2000 models, while preserving the original style. The side panel set is made of high-quality, durable, and slightly elastic material. Furthermore, the paint and fit are identical to the original. This set includes the following parts: Forefront
Steering cover
Front mudguard
Side screens in one piece
The Edge side panel set, consisting of four pieces, is designed to fit perfectly on Piaggio Zip and Zip 2000 models, while preserving the original style. The side panel set is made of high-quality, durable, and slightly elastic material. Furthermore, the paint and fit are identical to the original. This set includes the following parts: Forefront
Steering cover
Front mudguard
Side screens in one piece
Complete 5-piece fairing set suitable for Piaggio Zip-SP. This set fits both 2-stroke and 4-stroke models from 2000 onwards. It includes a Zip SP front fender. This set includes the following parts: Forefront
Front mudguard
Side screens in one piece
Steering cover
Front grille on top
Complete 5-piece fairing set suitable for Piaggio Zip-SP. This set fits both 2-stroke and 4-stroke models from 2000 onwards. It includes a Zip SP front fender. This set includes the following parts: Forefront
Front mudguard
Side screens in one piece
Steering cover
Front grille on top
Complete 5-piece fairing set suitable for Piaggio Zip-SP. This set fits both 2-stroke and 4-stroke models from 2000 onwards. It includes a Zip SP front fender. This set includes the following parts: Forefront Front mudguard
Side screens in one piece
Steering cover
Front grille on top
10-piece cover set suitable for the Sym Mio This cover set consists of the following 10 parts: Front mudguard
Steering cover
Left under-fairing spoiler. This cover is located under the running board and connects to the lower front fender.
Right side under-fairing spoiler. This cover is located under the running board and connects to the lower front fender.
Side panel left and right
Front fender above. This is the cover that surrounds the headlight.
Front fender below.
Intermediate cover at front fender Left and Right
This POLISPORT item is black. Ideal for everyday use and of high quality. Rear mudguard 26-29" Polisport X-Cape Evo 90mm - black. Polisport other black. Rear mudguard 26-29" Polisport X-Cape Evo 90mm - black The X-Cape Evo is the solution for optimal protection on the trails. This versatile MTB mudguard fits every frame, whether you ride a hardtail or a full-suspension mountain bike. Perfect Fit & Stability Universal compatibility - Suitable for both rigid and full-suspension frames Multiple angle adjustment - Easily adjust the mudguard for a perfect fit Pre-cut line - Extra adjustable for an even better fit Minimalist & Functional Design Sleek and stylish design - Fits perfectly on any MTB Maximum protection - Prevents splashes of dirt and water on muddy trails Lightweight & durable - Only 241 g, but robust enough for tough conditions Technical Specifications Suitable for wheels: 26" - 29" Width: 90 mm Length: 650 mm Weight: 241 g Whether you're an avid trail rider or a professional downhiller, the X-Cape Evo keeps you and your bike clean and protected on every adventure!
This BOFIX miscellaneous unit is designed for reliability and ease of use. Bofix scooter footboard screws (25 pieces). Bofix other. Bofix footboard screw for scooter (25 pieces) Bofix footboard screw for scooter (25 pieces)
This BOFIX miscellaneous unit is designed for reliability and ease of use. Bofix M7x145 threaded rod (4 pieces). Bofix other. Stud Bofix M7x145 (4 pieces)
