Cyclus Snap.In remover for Bosch 1 spider.
Compatible with Bosch Classic and Classic+ Line.
Thread guide SN-71-F, code 77202771.
Index Z8 55.0.
Removes and installs lock nuts from engines.
Necessary for engine repairs or chainring changes.
Use with tool holder 77202750.
Additional parts such as adapter or guide possible.
Recommended: Snap.In Thread Guide SN-71-F.
Professional mounting without slipping or tilting.
Guide can also be used with other Snap.In tools.
Please take factory torque into account when mounting.
Cyclus Snap.in lock nut remover for Bosch BDU 4.
For Bosch E-Bike motor 4th generation.
For mounting and dismounting lock nuts.
Tool uses integrated guide.
Mounted on the motor shaft with a pull-push mechanism.
Delivers high torque without slipping.
Can be used with snap-in holder 77202750.
Or with a 32 mm combination wrench.
Tighten locknut to factory torque.
Check torque with 3/8" torque wrench 7720115.
Do not use with power tools.
Cyclus Snap.In crank bolt remover
Compatible with 4mm hex bolts
Especially suitable for crank bolts
Holder art. 77202750 required for use
Additional adapter or guide may be required
Adhere to manufacturer's torque when mounting
Cyclus Snap.In crank bolt remover
Compatible with 15mm hex bolts
Especially suitable for crank bolts
Holder art. 77202750 required for use
Additional adapter or guide may be required
Adhere to manufacturer's torque when mounting
Cycle Snap-In puller
Compatible with Atom freewheel
Compatible with Maillard freewheel
Compatible with Regina freewheel
Suntour freewheel 2-slot 4/5/6 speed SN.31-C
Index Z2 18.6
Holder art. 77202750 required for use
Additional adapter or guide may be required
Adhere to the manufacturer's tightening torque
Cyclus Snap.In freewheel remover
Suitable for BMX, Sparta ION
For 16 mm axle diameter
Compatible with BMX freewheel 4 slots
Index Z4 29.5
Holder art. 77202750 required for use
Additional adapter or guide may be required
Maintain manufacturer's torque
Cyclus Snap.In freewheel remover
Suitable for BMX, Sparta ION
For 10 mm axle diameter
Compatible with BMX freewheel 4 slots
Index Z4 19.0
Holder art. 77202750 required for use
Additional adapter or guide may be required
Maintain manufacturer's torque
Cyclus Snap-In bottom bracket adjuster
Compatible with Race Face BSA30
Rotor BSA BB30
Enduro BB30
Index Z12 44.0
Holder part 77202750 required
Additional adapter or guide may be required
Please note the torque recommended by the manufacturer
Cyclus Snap.In bottom bracket wrench
For conventional 36 mm bottom bracket bearings
Suitable for right house
Holder art. 77202750 or 77202749 required
Combination holder, puller and guide required
Professional mounting and dismounting without slipping
Guide can also be used with other Snap.In tools
Adhere to the manufacturer's tightening torque
Cyclus Snap.In bottom bracket adjuster
Compatible with Shimano Ultegra SM-BBR60, BB-MT800
Shimano BSA Hollowtech 2 - BB-MT800 (XT/SLX/LX)
Index Z16 39.0
Guide provides stable hold of the tool
Maximum power transmission guaranteed
Slipping is a thing of the past
Holder art. 77202750 required for full use
Additional adapter or guide may be required
Recommended Snap.In guide bolt SN-73-F art. 77202773
Professional installation without slipping or tilting
Guide can also be used for other Snap.In tools
Adhere to the manufacturer's tightening torque
Cyclus workshop tools with handles
For mounting/dismounting of bottom bracket bearings
Compatible with Campagnolo, FAG, OFMEGA, KINEX, KSS
Snap.In bottom bracket remover suitable for Shimano XTR/Ultegra
Truvativ Gigapipe and Brose E-Motor compatible
Use with Snap.In holder #77202750
Thick rubber handles for high torque
Place tool in spline connection of bottom bracket
Turn spring loaded insert into crank bolt hole
Installing/removing the bottom bracket without slipping
Lower bearing bushing: keep clean and lubricated
Please note frame and torque according to manufacturer
Cyclus Snap.In bottom bracket adjuster SN.01-I
Compatible with Shimano Compact
Shimano BB-UN 51/71/72 (guide SN-70-F, 77202770)
Tecora (conductor SN-70-F, 77202770)
Shimano Octalink BB-7700/6500/5500 (guide SN-72-F, 77202772)
Index Z20 32.0
Basic holder 77202750 required for full use
Additional adapter or guide may be required
Recommended: SN-70-F or SN-73-F conductor
Professional installation without slipping or tilting
Guide can also be used for other Snap.In tools
Adhere to the manufacturer's tightening torque
High quality and dimensional accuracy
Made in Europe
Continuous new development
Tested by professionals
Cyclus Snap.In bottom bracket adjuster
Compatible with ISIS Drive
Compatible with Truvativ BB Power Spline
Conductor art. 77202770/71/72 depending on wire
Index Z20 32.0
Holder art. 77202750 required for use
Additional adapter or guide may be required
Recommended Snap.In guide SN-70-F / SN-71-F / SN-72-F
Professional mounting and dismounting without slipping
Guide usable with other Snap.In tools
Adhere to the manufacturer's tightening torque
Cyclus Snap.In bottom bracket adjuster
Compatible with Shimano Octalink Dura Ace
BB-7700 and BB-7710
Use a guide for a stable grip
Guarantees maximum power transmission
Slipping is a thing of the past
Index Z6 41.0
Holder art. 77202750 required for use
Additional adapter or guide may be required
Recommended Snap.In guide SN-72-F 77202772
Professional installation without slipping
Guide usable with other Snap.In tools
Adhere to the manufacturer's tightening torque
Cyclus Snap.In bottom bracket adjuster
Compatible with OFMAGA
Compatible with FAG
Compatible with SKF
Compatible with Shimano Nexus BB UN-10
Compatible with Campagnolo 4-sided bottom bracket
Mirage Veloce Xenon Centaur Daytona
Compatible with Sachs
Conductor SN-70-F requires art. 77202770
Index Z6 37.0
Holder art. 77202750 required for use
Additional adapter or guide may be required
Recommended Snap.In thread guide SN-70-F
Professional installation without slipping
Guide usable with other Snap.In tools
Adhere to the manufacturer's tightening torque
Cyclus Snap.In bottom bracket adjuster
Compatible with Campagnolo 4-sided bottom bracket
Record, Chorus, Athena (conductor SN-70-F, 77202770)
Miche Bahn + Evolight (conductor SN-70-F, 77202770)
Stronglight JP SBB (guide SN-70-F, 77202770)
Index Z12 23.5
Holder art. 77202750 required for full use
Additional adapter or guide may be required
Recommended: Snap-in thread guide SN-70-F
Professional installation without slipping or tilting
Guide can also be used with other Snap.In tools
Adhere to the manufacturer's tightening torque
Cyclus Press-Fit press ring for Shimano and FSA.
Designed for use with quick release 7720939.
For professional, safe and fast pressing.
A suitable press shaft is required for use.
CYCLE snap.in press shaft SN.90-P.
Item no. 77202790.
CYCLUS Press-Fit generation 2 press spindle.
Item no. 7720318.
CYCLUS Press-Fit generation 1 press spindle.
Item no. 7720312.
Suitable for bottom brackets with axle î 24 mm.
Cyclus Press-Fit press ring for FSA and SRAM BB30.
Designed for quick release 7720939 and press spindle.
For professional, safe and fast pressing.
A suitable press shaft is required.
CYCLE snap.in press shaft SN.90-P.
Item no. 77202790.
CYCLUS Press-Fit gen.2 press spindle.
Item no. 7720318.
CYCLUS Press-Fit gen.1 press spindle.
Item no. 7720312.
Suitable for bottom bracket with axle î 30 mm.
Cyclus Press-Fit press ring for SRAM DUB.
Designed for use with quick release nut.
Ensures professional and safe working.
Enables fast and efficient pressing.
For professional use, a press spindle is required.
Suitable for Press-Fit inner bearings.
Suitable press spindles are:
CYCLUS snap-in press spindle SN.90-P.
Item no. 77202790.
CYCLUS press spindle without rings gen.2.
Item no. 7720318.
CYCLUS press spindle without rings gen.1.
Item no. 7720312.
Cyclus Press-fit ring for SRAM Truvativ GXP
For use with quick-release clamp art. 7720939 and press spindle
For professional, safe and fast work
Requires one of the following press spindles:
77202790 Snap-in press shaft Press-Fit SN.90-P
7720318 Press spindle Press-Fit generation 2
7720312 Press spindle Press-Fit generation 1
Suitable for bottom bracket with axle diameter 24 mm
Cyclus crank puller adapter for Campagnolo Power Torque carbon
Enables damage-free disassembly of cranks
Laser production technology for precise internal shape
No plastic protective caps required
Suitable for all Campagnolo Power Torque carbon cranks
Except Bullet Ultra time trial cranks
Only works with alloy crank extractor
Article 7720249 required
Cycle press-in spindle with press rings (5 sets)
Included press rings: Campagnolo Ultra/Power Torque
SRAM, Truvativ, GXP
Shimano BB and FSA
FSA BB30 and SRAM DUB
Press only on outer bearing ring
Prevent damage to ball bearings and seals
Cyclus press-in tool with 11 pairs of sleeves.
Various inner and outer diameters.
Suitable for various bearing types.
Presses bearings neatly into the bearing housing.
Gradual pressing through increasing screw thread.
Make sure the bearing and housing are clean.
Use grease for easier pressing.
Grease prevents bearings from squeaking later.
Avoid tilting while pressing.
Edging can damage bearings and the house.
