Make cutting of pipes and pressing of
Olives easy. Designed for use with 5.0
mm and 5.5 mm hydraulic lines. Razor-sharp
pipe cutter with integrated olive press
This IceToolz cone wrench set is a
professional set of cone wrenches that fit in no
A single workshop may be missing. The IceToolz
cone keys are made from the sturdy
chrome-molybdenum steel (Cr-Mo) which says something
about the quality of these cone keys. The
cone keys are finished with a pleasant
rubber handle. And the length of 20cm is
long enough to provide sufficient power
set. The IceToolz article number of this
cone key set is 47X3.
This IceToolz cone wrench set is made
Made of Cr-Mo steel, so nice and sturdy.
with a comfortable grip. The cone keys
are a solution for repairs where the cups
and lock nut must be loosened and the
Regular handle wrenches are too thick. The IceToolz
Cone keys then offer a solution. This set
cone wrenches are the most common sizes
Many jobs require 2 cone wrenches to
for example loosen the lock nut of the cone
turning. But it is not necessary to have a double
to buy a set of cone wrenches, often have
the cone and the lock nut are a different size. And
complete set of cone keys is sufficient per
workplace.
Key size
13 mm
14 mm
15 mm
16 mm
17 mm
18 mm
19 mm
This IceToolz cone wrench is a professional
cone wrench that should not be used in any workshop
missing. The IceToolz cone wrenches are
made of strong chrome-molybdenum
steel (Cr-Mo) which says something about the quality of
this cone wrench. The cone wrench is finished
with a comfortable rubber handle. And the length
23cm is long enough to provide sufficient
to be able to exert force. The IceToolz
The article number of this cone wrench is 4713.
This IceToolz cone wrench is made of
Cr-Mo steel, so nice and sturdy. Equipped with
a comfortable handle. The cone keys are
a solution for repairs where the cups and
lock nut must be loosened and the
Regular handle wrenches are too thick. The IceToolz
Cone keys then offer a solution.
Many jobs require 2 cone wrenches to
for example loosen the lock nut of the cone
turning. But it is not necessary to have a double
to buy a set of cone wrenches, often have
the cone and the lock nut are a different size. And
complete set of cone keys is sufficient per
workplace.
The IceToolz cone wrenches are available in sizes: 13,
14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 and
25mm
This IceToolz cone wrench set is a handy set
cone keys that can be used on both sides
are. The IceToolz cone wrenches are made
made of strong chrome-molybdenum steel (Cr-Mo)
which says something about the quality of this
cone wrenches. The IceToolz article number of
this cone wrench set is 37X3.
This IceToolz cone wrench set is made
Made of Cr-Mo steel, so nice and sturdy.
with a comfortable grip. The cone keys
are a solution for repairs where the cups
and lock nut must be loosened and the
Regular handle wrenches are too thick. The IceToolz
Cone keys then offer a solution. This set
cone wrenches are the most common sizes
Many jobs require 2 cone wrenches to
for example loosen the lock nut of the cone
turning. But it is not necessary to have a double
to buy a set of cone wrenches, often have
the cone and the lock nut are a different size. And
complete set of cone keys is sufficient per
Workplace. These IceToolz combination cone wrenches are
available in sizes: 13-14, 15-16 and 17-18mm
IceToolz Chain Cleaner with 20 brushes for
4-sided intensive cleaning. Includes 1 spare
sponge. Equipped with rubber bracket for
attachment to the rear fork so that
cleaning easier and more efficient
is being used. Patent pending.
Elvedes grease gun. 80ml, including grease type labels. For use with roller brake grease (2791) or lithium grease (art. 5166). Grease gun needle also available separately (5243). Grease not included.
Properties
Vibration resistant
Screw locking replaces alternative methods
such as: split pins, retaining rings, retaining springs and
spring washers
Easy to apply and accurately dosed
by means of a practical 24 g accordion bottle
Technical data
- Temperature resistance -55 §C to +150 §C
- Characteristic odor
- Drying time (before processing) 30-50 minutes
- Fully cured 6-12 hours
To be used for:
Shimano, SRAM, SunRace, Chris King
Shimano MF compatible freewheels & Campagnolo
cassettes and bottom brackets (Record, Chorus & Athena)
Material:
Cr-V steel
The IceToolz cassette remover for the
cassette lockring is a commonly used item in a
bicycle workshop. This customer with a
chrome vanadium quality guarantees
a long lifespan. This buyer can
be used with an 8mm Allen key
(IceToolz number 35V8). The IceToolz customer is
suitable for:
Shimano® CS, SRAM, SunRace, Chris King
compatible cassettes and ShimanoÓ Center Lock
disc brakes / ShimanoÓ MF compatible
freewheels & CampagnoloÓ cassettes (all) and
bottom brackets (Record, Chorus, and Athena)
The IceToolz article number of this HG
customer is 09C5.
With this IceToolz cassette lockring tool you can
lockring that secures the cassette to the body
be loosened. After this comes the wreath
sprockets of the cassette free and they can
be replaced. Before loosening it is
necessary to use a second tool, a
so-called freewheel remover. The
The direction of rotation of the HG ring is the freewheel
direction. So a tool is needed to turn the cassette
to stop. This cannot be done with the bare hand.
This really needs a tool that can
gears not damaged.
Brand: IceToolz Type: Xpert Model: E171R (BSA 1.37x24) thread, right. For the right side Dimensions: 3.5 x 3.5 x 1.3 cm Weight: 0.062 kg Colour: Gold Material: steel
Bottom Bracket Tool 3-notch IceToolz 240M083 made of Cr-Mo Steel To be used with 1/2 socket wrench (#53R4) Brand: IceToolz Article number: 240M083 Material: Cr-Mo Steel Number of notches: 3
Product dimensions: 46 x 29.5 x 5 cm Weight: 2.687kg Material: Steel, Plastic Features: For 1", 1-1/8", 1-1/4" and 1-1/2" For steerer tube length up to 260 mm Patented
CYCLUS TOOLS snap.in bottom bracket remover, compatible with: SRAM DUB SN. 13-ik For a functional tool, you still need holder item no.:7202750 and possibly additional parts such as an adapter or a guide. Please note the tightening torque specified by the manufacturer for each bottom bracket assembly.
CYCLUS TOOLS snap.in bottom bracket puller, compatible with: FSA MegaEVO bottom bracket (guide bolt SN-77-F item no.: 7202777). TOKEN Ninja BB386 For a functional tool, you still need the holder item no.: 7202750, and the guide bolt SN-77-F (Art.-No.: 7202777) is also recommended. With this combination of holder, puller and the matching guide, professional assembly and disassembly of the bottom bracket is possible without slipping and tilting. Another advantage is that this guide can also be used with other tools from the snap.in range. Please observe the tightening torque specified by the manufacturer for each bottom bracket.
The lockring remover is used for mounting and dismounting Shimano Steps 8000 E-bike motor lockrings. To ensure that the required torque forces are safely transferred, the tool is secured in the motor axle by the integrated guide and connected to the lockring by means of a pull-push mechanism. The teeth are designed in a reinforced shape, thicker than usual. This way, the tool can deliver high torque when loosening or tightening the lockring, guaranteed without slipping. The tool can be used in combination with snap.in tool holder (art. 7202750) or 32 mm combination wrench. When tightening, observe the tightening torque recommended by the manufacturer. Use a 3/8" torque wrench (art. 720115) to check the torque. Note! The lockring remover cannot be used with power tools.
