The IceToolz Allen key set contains the three most
used allen keys. These allen keys
fit comfortably in the hand due to the ergonomic design
handle. Allen key set is made of wear-resistant
steel. The IceToolz article number of this
combination allen key is 70TA.
This handy Allen key set contains the three
most commonly used sizes. The ball head end of
This Allen key also makes that difficult to
reach Allen bolts easy to loosen
These are the Allen keys that others are for.
to remain lying down.
4, 5, 6 mm with ball head version
Ergonomic T-grip handle
Icetoolz Multitool Mighty 19-piece\nMaterial: steel, plastic\nDimensions: 8 x 3.5 x 2.5 cm (L x W x D)\n•: 1.5x2x2.5x3x4x5x6x8mm Allen keys\n•: Phillips and socket screwdriver\n•: T-25 star wrench\n•: 8x9x10x15mm wrenches\n•: 14~15G spoke nipple spanners\n•: Removable tire levers\nWeight: 144 grams
The IceToolz Essence toolbox is a set
Good quality bicycle tools. With
This tool box can hold many basic
repairs are done on bicycles. The
IceToolz article number of this complete
tool box is 82F4.
With the IceToolz range of bicycle tools
This toolbox contains most of the basic
bicycle jobs to be carried out. Nice assortment
bicycle tools for the novice handyman, for
in the broom wagon, in front of the clubhouse of the
cycling club and more.
This complete set of bicycle tools is nicely
packed in a handy case. With this set
bicycle tools are all the tools
present:
* Tire lever x3
* Self-adhesive tape x6
* Cassette/Freewheel remover
* Cassette/Freewheel remover with guide pin
* Crank adapter, Hollowtech II
* Crank puller
* Chain tool (5~12 speed)
* Nipple spanner 10G~15G
* Pedal wrench 15 mm
* Screwdriver -, 6 mm
* Screwdriver +, #1 Phillips
* Open-end wrench (9, 10 mm)
* Adjustable wrench 6Ã
* Allen key 8 mm
* Freewheel remover multispeed 1/2Ã x 3/32Ã
* Multitool, Allen key (2, 2.5, 3, 4, 5, 6 mm)
* Multitool, torx key (T-9,10,15,20,25,27,30, 4
The IceToolz Essence toolbox is a set
Good quality bicycle tools. With
This tool box can hold many basic
repairs are done on bicycles. The
IceToolz article number of this complete
tool box is 82F4.
With the IceToolz range of bicycle tools
This toolbox contains most of the basic
bicycle jobs to be carried out. Nice assortment
bicycle tools for the novice handyman, for
in the broom wagon, in front of the clubhouse of the
cycling club and more.
This complete set of bicycle tools is nicely
packed in a handy case. With this set
bicycle tools all tools are present
to:
* Tire lever x3
* Cassette/Freewheel remover with guide pin
* Crank adapter, Hollowtech II
* Crank puller
* Chain tool (5~12 speed)
* Nipple spanner 10G~15G
* Screwdriver -, 6 mm
* Screwdriver +, #1 Phillips
* Open-end wrench (9, 10 mm)
* Adjustable wrench 6Ã
* Allen key 8 mm
* Adapter 8mm to 1/2×
* Bottom bracket wrench, Shimano/ ISIS Drive
* Valve hose 8 cm
* Torx key T-25
* Pedal wrench 15 mm, Freewheel remover,
Bottom bracket wrench with hook
This IceToolz chain whip or cassette remover
is suitable for all gears. The Cr-Mo
Steel construction guarantees good
professional quality. This chain whip is
equipped with an ergonomic handle. The
IceToolz article number of this chain whip
is 53S3.
The chain whip holds the cassette while
with the other tool, for example the 09C3 for
HG cassettes, the cassette locking ring is
loosened. This must be done with the
freewheel direction can be loosened.
Holding the cassette by hand is not
recommended. With this freewheel remover, which you
should actually be called a cassette holder, is
the job got done in no time.
The IceToolz freewheel remover is suitable for
the freewheels with a 2 cam connection. This
buyer with a Cr-Mo quality guarantees
for a long lifespan. This customer can
be used with a 24mm wrench
(IceToolz 4724) or with a ratchet wrench (IceToolz
E211) with 24mm cap. The IceToolz
article number of this HG customer is 09D1.
This freewheel remover is for the 2-cam
freewheels. This connection is mainly located on
the singlespeed freewheels, so semi-fixie and
BMX. The 2 cams fit seamlessly into the
freewheel and loosen, counterclockwise, is a
piece of cake with this buyer.
This patented IceToolz sanding block is
made of alumina, a very hard material.
This sanding block is suitable for all pipe sizes in
the bicycle industry and sands both domestically and
the outside. The IceToolz article number of
this sanding block is 16B1.
After sawing, with the IceToolz saw 16H3 in the
IceToolz saw aid 16G1, always arise
irregularities. Ideally, the sawn-off
tube on both the inside and outside
slanted plane. This can be done quickly and easily with a few
movements with this patented sanding block
from IceToolz.
Alumina is an inorganic compound from which
the precious stones such as ruby and sapphire also
exist.
The blade of the tube cutter wears out over time
time. Fortunately, this knife is available and
easy to replace. This spare blade is
suitable for 16A2/16A4/16A5. The IceToolz
article number of this knife is 16A2S.
The IceToolz tube cutter or pipe cutter is
suitable for pipes from 6mm to 42mm. It
sharp rotating blade cuts aluminum, steel,
Cr-Mo and titanium. This beautiful tube cutter is
provided with a grater to remove the sharp edges
to be collected after cutting and also a reserve
Blade. The IceToolz article number is 16H3.
This IceToolz pipe cutter is a godsend for
customizing a front fork or the
shortening a handlebar. The cutting edge is at the
inside of the tube so it never gets in the way
during further assembly. Of course, the cutting edge,
that occurs when using the IceToolz
pipe cutter, be removed. The rasp that
at the back of the tube cutter is here
also suitable for. As an extra, behind that
Grate another spare blade. In total a
indispensable tool for perfect abbreviations.
Often used in combination with the 16B1
from IceToolz.
This IceToolz cable cutter is a professional
cable cutter hydraulic lines. The blade in
the pliers cut the pipe from the middle.
This only creates a gap at the top
small pressure point that can be corrected
with the extra tool on the IceToolz cable cutter
This IceToolz cable cutter comes with
a spare blade (54A1S) so that you can always
is equipped with a sharp tool for the right
work. The IceToolz article number of this
cable cutter is 67B4.
Cutting hydraulic hoses or pipes
requires different pliers than others
Cables. The IceToolz cable cutter includes a blade
in a point shape. This means that from the
cut the middle of the hydraulic line and
The IceToolz cable cutter has an extra tool
with which the pressure point is neatly rounded again
can be. The cable cutter is used to
second blade included (IceToolz number
54A1S). This can also be ordered separately later.
become. Important, because a sharp knife is a
must for a correct cut.
Includes: 1 spare blade #54A1S
Cuts the hose flawlessly and prevents
deformation of the inner cable
This IceToolz lock nut remover for the
ShimanoÓ Hollowtech II cranks are a handy
workshop tool. The lock nut
buyer is made of polyoxymethylene, a
polymer known for its hardness.
Wear resistant this buyer for the
ShimanoÓ crank nut. The IceToolz
The article number of this crank nut remover is
04T1.
The buyer for the ShimanoÓ crank nut is
easy to use, much more practical if you often
is being worked with. More power can be exerted
than with most other tools.
This IceToolz lock nut remover is a popular
seen tool in professional workshops.
This IceToolz cone wrench set is a
professional set of cone wrenches that fit in no
A single workshop may be missing. The IceToolz
cone keys are made from the sturdy
chrome-molybdenum steel (Cr-Mo) which says something
about the quality of these cone keys. The
cone keys are finished with a pleasant
rubber handle. And the length of 20cm is
long enough to provide sufficient power
set. The IceToolz article number of this
cone key set is 47X3.
This IceToolz cone wrench set is made
Made of Cr-Mo steel, so nice and sturdy.
with a comfortable grip. The cone keys
are a solution for repairs where the cups
and lock nut must be loosened and the
Regular handle wrenches are too thick. The IceToolz
Cone keys then offer a solution. This set
cone wrenches are the most common sizes
Many jobs require 2 cone wrenches to
for example loosen the lock nut of the cone
turning. But it is not necessary to have a double
to buy a set of cone wrenches, often have
the cone and the lock nut are a different size. And
complete set of cone keys is sufficient per
workplace.
Key size
13 mm
15 mm
17 mm
This IceToolz cone wrench is a professional
cone wrench that should not be used in any workshop
missing. The IceToolz cone wrenches are
made of strong chrome-molybdenum
steel (Cr-Mo) which says something about the quality of
this cone wrench. The cone wrench is finished
with a comfortable rubber handle. And the length
23cm is long enough to provide sufficient
to be able to exert force. The IceToolz
The article number of this cone wrench is 4713.
This IceToolz cone wrench is made of
Cr-Mo steel, so nice and sturdy. Equipped with
a comfortable handle. The cone keys are
a solution for repairs where the cups and
lock nut must be loosened and the
Regular handle wrenches are too thick. The IceToolz
Cone keys then offer a solution.
Many jobs require 2 cone wrenches to
for example loosen the lock nut of the cone
turning. But it is not necessary to have a double
to buy a set of cone wrenches, often have
the cone and the lock nut are a different size. And
complete set of cone keys is sufficient per
workplace.
The IceToolz cone wrenches are available in sizes: 13,
14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 and
25mm
This IceToolz cone wrench is a professional
cone wrench that should not be used in any workshop
are missing. The IceToolz cone wrenches are
made of strong chrome-molybdenum
steel (Cr-Mo) which says something about the quality of
This cone wrench. The cone wrench is finished
with a comfortable rubber handle. And the length
23cm is long enough to provide sufficient
to be able to exert force. The IceToolz
The article number of this cone wrench is 4713.
This IceToolz cone wrench is made of
Cr-Mo steel, so nice and sturdy. Equipped with
a comfortable handle. The cone keys are
a solution for repairs where the cups and
lock nut must be loosened and the
Regular handle wrenches are too thick. The IceToolz
Cone keys then offer a solution.
Many jobs require 2 cone wrenches to
for example loosen the lock nut of the cone
turning. But it is not necessary to have a double
to buy a set of cone wrenches, often have
the cone and the lock nut are a different size. And
complete set of cone keys is sufficient per
workplace.
The IceToolz cone wrenches are available in sizes: 13,
14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 and
25mm
This IceToolz cone wrench is a professional
cone wrench that should not be used in any workshop
are missing. The IceToolz cone wrenches are
made of strong chrome-molybdenum
steel (Cr-Mo) which says something about the quality of
this cone wrench. The cone wrench is finished
with a comfortable rubber handle. And the length
of 23cm is long enough to provide sufficient
to be able to exert force. The IceToolz
The article number of this cone wrench is 4713.
This IceToolz cone wrench is made of
Cr-Mo steel, so nice and sturdy. Equipped with
a comfortable handle. The cone keys are
a solution for repairs where the cups and
lock nut must be loosened and the
Regular handle wrenches are too thick. The IceToolz
Cone keys then offer a solution.
Many jobs require 2 cone wrenches to
for example loosen the lock nut of the cone
turning. But it is not necessary to have a double
to buy a set of cone wrenches, often have
the cone and the lock nut are a different size. And
complete set of cone keys is sufficient per
workplace.
The IceToolz cone wrenches are available in sizes: 13,
14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 and
25mm
The IceToolz multitool is a handy and sturdy
5-function tool in pocket knife format. This multi-tool
from IceToolz is made of steel, so
A guaranteed powerful multi-tool. The IceToolz
The article number of this multi-tool is 95A1.
This multi-tool from IceToolz is a sturdy and
compact tool with the most
common Allen sizes, and 2
screwdrivers. The necessary bicycle tools
carry in your pocket for emergency repairs.
* Allen key 4 mm
* Allen key 5 mm
* Allen key 6 mm
* Screwdriver -
* Screwdriver +
Shimano cutting and mounting tool for
Disc brake hose type: TL-BH62.
-places plug-in connectors securely on the
pipes.
- 2 in 1 tool.
- Cut hydraulic disc brake lines at right angles
(90 degrees) through.
- Adjustable pipe clamping force.
- Compact size for easy storage
- Spare blade included.
-hole to put the tools on the tool board
to hang.
