Cyclus Snap.In freewheel remover
Suitable for BMX, Sparta ION
For 10 mm axle diameter
Compatible with BMX freewheel 4 slots
Index Z4 19.0
Holder art. 77202750 required for use
Additional adapter or guide may be required
Maintain manufacturer's torque
Cyclus Snap-In bottom bracket adjuster
Compatible with Race Face BSA30
Rotor BSA BB30
Enduro BB30
Index Z12 44.0
Holder part 77202750 required
Additional adapter or guide may be required
Please note the torque recommended by the manufacturer
Cyclus Snap.In bottom bracket wrench
For conventional 36 mm bottom bracket bearings
Suitable for right house
Holder art. 77202750 or 77202749 required
Combination holder, puller and guide required
Professional mounting and dismounting without slipping
Guide can also be used with other Snap.In tools
Adhere to the manufacturer's tightening torque
Cyclus Snap.In bottom bracket adjuster
Compatible with Shimano Ultegra SM-BBR60, BB-MT800
Shimano BSA Hollowtech 2 - BB-MT800 (XT/SLX/LX)
Index Z16 39.0
Guide provides stable hold of the tool
Maximum power transmission guaranteed
Slipping is a thing of the past
Holder art. 77202750 required for full use
Additional adapter or guide may be required
Recommended Snap.In guide bolt SN-73-F art. 77202773
Professional installation without slipping or tilting
Guide can also be used for other Snap.In tools
Adhere to the manufacturer's tightening torque
Cyclus workshop tools with handles
For mounting/dismounting of bottom bracket bearings
Compatible with Campagnolo, FAG, OFMEGA, KINEX, KSS
Snap.In bottom bracket remover suitable for Shimano XTR/Ultegra
Truvativ Gigapipe and Brose E-Motor compatible
Use with Snap.In holder #77202750
Thick rubber handles for high torque
Place tool in spline connection of bottom bracket
Turn spring loaded insert into crank bolt hole
Installing/removing the bottom bracket without slipping
Lower bearing bushing: keep clean and lubricated
Please note frame and torque according to manufacturer
Cyclus Snap.In bottom bracket adjuster SN.01-I
Compatible with Shimano Compact
Shimano BB-UN 51/71/72 (guide SN-70-F, 77202770)
Tecora (conductor SN-70-F, 77202770)
Shimano Octalink BB-7700/6500/5500 (guide SN-72-F, 77202772)
Index Z20 32.0
Basic holder 77202750 required for full use
Additional adapter or guide may be required
Recommended: SN-70-F or SN-73-F conductor
Professional installation without slipping or tilting
Guide can also be used for other Snap.In tools
Adhere to the manufacturer's tightening torque
High quality and dimensional accuracy
Made in Europe
Continuous new development
Tested by professionals
Cyclus Snap.In bottom bracket adjuster
Compatible with ISIS Drive
Compatible with Truvativ BB Power Spline
Conductor art. 77202770/71/72 depending on wire
Index Z20 32.0
Holder art. 77202750 required for use
Additional adapter or guide may be required
Recommended Snap.In guide SN-70-F / SN-71-F / SN-72-F
Professional mounting and dismounting without slipping
Guide usable with other Snap.In tools
Adhere to the manufacturer's tightening torque
Cyclus Snap.In bottom bracket adjuster
Compatible with Shimano Octalink Dura Ace
BB-7700 and BB-7710
Use a guide for a stable grip
Guarantees maximum power transmission
Slipping is a thing of the past
Index Z6 41.0
Holder art. 77202750 required for use
Additional adapter or guide may be required
Recommended Snap.In guide SN-72-F 77202772
Professional installation without slipping
Guide usable with other Snap.In tools
Adhere to the manufacturer's tightening torque
Cyclus Snap.In bottom bracket adjuster
Compatible with OFMAGA
Compatible with FAG
Compatible with SKF
Compatible with Shimano Nexus BB UN-10
Compatible with Campagnolo 4-sided bottom bracket
Mirage Veloce Xenon Centaur Daytona
Compatible with Sachs
Conductor SN-70-F requires art. 77202770
Index Z6 37.0
Holder art. 77202750 required for use
Additional adapter or guide may be required
Recommended Snap.In thread guide SN-70-F
Professional installation without slipping
Guide usable with other Snap.In tools
Adhere to the manufacturer's tightening torque
Cyclus Snap.In bottom bracket adjuster
Compatible with Campagnolo 4-sided bottom bracket
Record, Chorus, Athena (conductor SN-70-F, 77202770)
Miche Bahn + Evolight (conductor SN-70-F, 77202770)
Stronglight JP SBB (guide SN-70-F, 77202770)
Index Z12 23.5
Holder art. 77202750 required for full use
Additional adapter or guide may be required
Recommended: Snap-in thread guide SN-70-F
Professional installation without slipping or tilting
Guide can also be used with other Snap.In tools
Adhere to the manufacturer's tightening torque
Cyclus Press-Fit press ring for Shimano and FSA.
Designed for use with quick release 7720939.
For professional, safe and fast pressing.
A suitable press shaft is required for use.
CYCLE snap.in press shaft SN.90-P.
Item no. 77202790.
CYCLUS Press-Fit generation 2 press spindle.
Item no. 7720318.
CYCLUS Press-Fit generation 1 press spindle.
Item no. 7720312.
Suitable for bottom brackets with axle î 24 mm.
Cyclus Press-Fit press ring for FSA and SRAM BB30.
Designed for quick release 7720939 and press spindle.
For professional, safe and fast pressing.
A suitable press shaft is required.
CYCLE snap.in press shaft SN.90-P.
Item no. 77202790.
CYCLUS Press-Fit gen.2 press spindle.
Item no. 7720318.
CYCLUS Press-Fit gen.1 press spindle.
Item no. 7720312.
Suitable for bottom bracket with axle î 30 mm.
Cyclus Press-Fit press ring for SRAM DUB.
Designed for use with quick release nut.
Ensures professional and safe working.
Enables fast and efficient pressing.
For professional use, a press spindle is required.
Suitable for Press-Fit inner bearings.
Suitable press spindles are:
CYCLUS snap-in press spindle SN.90-P.
Item no. 77202790.
CYCLUS press spindle without rings gen.2.
Item no. 7720318.
CYCLUS press spindle without rings gen.1.
Item no. 7720312.
Cyclus Press-fit ring for SRAM Truvativ GXP
For use with quick-release clamp art. 7720939 and press spindle
For professional, safe and fast work
Requires one of the following press spindles:
77202790 Snap-in press shaft Press-Fit SN.90-P
7720318 Press spindle Press-Fit generation 2
7720312 Press spindle Press-Fit generation 1
Suitable for bottom bracket with axle diameter 24 mm
Cyclus crank puller adapter for Campagnolo Power Torque carbon
Enables damage-free disassembly of cranks
Laser production technology for precise internal shape
No plastic protective caps required
Suitable for all Campagnolo Power Torque carbon cranks
Except Bullet Ultra time trial cranks
Only works with alloy crank extractor
Article 7720249 required
Quick-release jaw for pressing and milling work.
Makes pressing and milling much more efficient.
No time loss due to turning the end nut.
Suitable for Cyclus pressing and milling tools.
Robust workshop design in die-casting.
Allows for higher contact pressure.
Ergonomic grip for safe working.
Speed up work with CYCLUS TOOLSÓ tools.
Head and press bushings quickly in place.
Ready to use in seconds.
Squeezing opens the wire gripping mechanism.
Moves quickly on the spindle.
Closed it works like a nut.
Long thread for high pressure.
Sturdy construction for heavy work.
Comfortable and safe operation.
Also suitable as an upgrade for existing tools.
Heavy-duty precision casting.
Long thread for high pressure.
Ergonomic handles for safety.
Compatible with all Cyclus press tools.
Open position disables threads.
Closed position activates nut function.
Cyclus headset cutter for milling tools.
To be used with tool 7720211.
Use with cone guide î48 mm 7720943.
Suitable for pipes with î 41.7 mm.
Milling depth is 2.3 mm.
For integrated headsets.
Angle of the bearing seats is 36ø.
Makes flat and coaxial seats.
Milling named according to SHIS system.
Headset identification system.
Type and internal diameter are stated.
Example: EG 34.
EC is external cup.
ZS is Zero Stack.
IS is an integrated standard.
Diameter 41.7 mm.
Milling depth 2.3 mm.
Milling angle 36ø.
Includes a loose cutter.
For complete set, extra tools are required.
Holder art.no. 7720211 required.
Cone guide art.no. 7720943 required.
Always turn clockwise.
Use suitable cutting oil when milling.
Cyclus Snap.In axle guide.
Compatible with Shimano HollowTech 2.
Compatible with Shimano BB 9000.
Compatible with Shimano Ultegra SM-BBR60.
Essential for professional installation.
Prevents slipping, tipping and damage.
Ensures safe use of tools.
Also useful within the snap.in family.
One guide for multiple tools.
Saves space and costs in the workplace.
Holder art.no. 77202750 is required.
A snap-in insert is also required.
For example art. no. 77202706 or 77202709.
Always follow the specified tightening torque.
