Adapter for industrial bearings Campagnolo
For Ultra Torque and Power Torque cranks
Suitable for article 7720250 and 7720248
For removing the inner bearing ring
Can be used on damaged bearings
When standard tractor fails
Adapter grips bearing ring at three points
Use together with standard tractor
Bearing ring is pulled out in a controlled manner
This IceToolz nipple spoke spanner has the
star shape for the MavicÓ nipples. The MavicÓ
nipples have an unusual shape, a
Star-shaped nipple. This nipple spoke tensioner
has the fit for the MavicÓ on one side
M7 nipple and on the other side the M9 fitting.
The IceToolz article number of this nipple-
spoke tensioner is 12H4.
cycle Chainring'R (dis)assembly pliers for chainring bolts.
Includes 5 bits (A, B, C, D, E).
For safe mounting and dismounting of chainrings and dropouts.
Make sure the bit and chainring bolt fit exactly.
Quick and safe change of dropouts and chainrings.
Work safely without the bolts slipping.
Guide (î 7 mm) makes loosening of seized bolts easy.
The counterbit serves as a counter-holder for the nut.
Pay attention to the correct fit of the bit.
Including bits:
Bit A (7720322) 1.0mm notch Æ Campagnolo carbon cranks.
Bit B (7720323) 2.0mm notch Æ Miche cranks.
Bit C (7720324) 5mm hex Æ SRAM/Truvativ & FSA cranks.
Bit D (7720325) 1.5mm 2-notch Æ Shimano cranks.
Bit E (7720326) 1 mm 2-notch Æ Campagnolo cone, Pista, SRAM X-Four, Shimano Dura Ace Pista.
Cyclus Crank holder for mounting or dismounting chainring
Clamp the crank holder in a vice
Select correct adapter: square cone, Shimano Octalink or Hollowtech II
Loosen the knurled screw on the side
Insert selected adapter into crank holder
Retighten the knurled screw to secure the adapter
Place the crank on the adapter
Secure crank with supplied knurled screw
Inclusive:
Crank holder for chainring mounting
Adapter for square cone
Adapter for Shimano Octalink / Hollowtech II
Knurled screw to secure crank
Cyclus Wera ratchet pistol
Pistol-shaped ratchet with 6 bits
Ergonomic grip for fast and safe working
Integrated holder for 6 bits DIN ISO 1173-D 6.3
Ratchet function with fine teeth for small return angle
Adjustable rotation direction: right, fixed or left
Maximum torque up to 50 Newton meters
Magnetic 1/4" Allen key with Rapidaptor
One-hand function for quick bit changes
Includes 6 bits of 25 mm: Allen key 3,4,5,6 mm
Torx 25 and Torx 30
First screw the bushing onto the derailleur bolt and
then screw the whole thing into the newly cut out
dropout wire.
That works better and prevents it from happening again
unscrewing the threaded bushing.
Leght: 300mm
Weight: 0.74 kg
Cycle torque wrench 5Æ25 Nm.
For controlled tightening of bolts.
Many high-end bikes have featured moments.
Compliance required for warranty and liability purposes.
Ensures precise tightening according to standards.
High quality from Cyclus ToolsÓ.
Indispensable in every bicycle workshop.
Cyclus repair pedal thread cutters, set LH + RH.
For replacing damaged pedal threads.
Crane removes old wire and cuts new one.
One tool for quick and easy repairs.
Saves time and money.
New thread requires threaded sleeves (7720035 / 7720066 / 7720067).
Includes tap for left pedal (with milled ring).
Includes tap for right pedal.
Recommended tap holder: art. 7720124.
Set of taps for pedal thread M14 x 1.25.
For re-cutting pedal screws.
Set includes tap for left pedal (L).
Tap left pedal with milled ring.
Set includes tap for right pedal (R).
Tap right pedal without milled ring.
Note different thread directions: L and R.
Use suitable tap wrench art. 7720124.
