This IceToolz chain whip or cassette remover
is suitable for all gears. The Cr-Mo
Steel construction guarantees good
professional quality. This chain whip is
equipped with an ergonomic handle. The
IceToolz article number of this chain whip
is 53S3.
The chain whip holds the cassette while
with the other tool, for example the 09C3 for
HG cassettes, the cassette locking ring is
loosened. This must be done with the
freewheel direction can be loosened.
Holding the cassette by hand is not
recommended. With this freewheel remover, which you
should actually be called a cassette holder, is
the job got done in no time.
The IceToolz freewheel remover is suitable for
the freewheels with a 2 cam connection. This
buyer with a Cr-Mo quality guarantees
for a long lifespan. This customer can
be used with a 24mm wrench
(IceToolz 4724) or with a ratchet wrench (IceToolz
E211) with 24mm cap. The IceToolz
article number of this HG customer is 09D1.
This freewheel remover is for the 2-cam
freewheels. This connection is mainly located on
the singlespeed freewheels, so semi-fixie and
BMX. The 2 cams fit seamlessly into the
freewheel and loosen, counterclockwise, is a
piece of cake with this buyer.
This patented IceToolz sanding block is
made of alumina, a very hard material.
This sanding block is suitable for all pipe sizes in
the bicycle industry and sands both domestically and
the outside. The IceToolz article number of
this sanding block is 16B1.
After sawing, with the IceToolz saw 16H3 in the
IceToolz saw aid 16G1, always arise
irregularities. Ideally, the sawn-off
tube on both the inside and outside
slanted plane. This can be done quickly and easily with a few
movements with this patented sanding block
from IceToolz.
Alumina is an inorganic compound from which
the precious stones such as ruby and sapphire also
exist.
The blade of the tube cutter wears out over time
time. Fortunately, this knife is available and
easy to replace. This spare blade is
suitable for 16A2/16A4/16A5. The IceToolz
article number of this knife is 16A2S.
The IceToolz tube cutter or pipe cutter is
suitable for pipes from 6mm to 42mm. It
sharp rotating blade cuts aluminum, steel,
Cr-Mo and titanium. This beautiful tube cutter is
provided with a grater to remove the sharp edges
to be collected after cutting and also a reserve
Blade. The IceToolz article number is 16H3.
This IceToolz pipe cutter is a godsend for
customizing a front fork or the
shortening a handlebar. The cutting edge is at the
inside of the tube so it never gets in the way
during further assembly. Of course, the cutting edge,
that occurs when using the IceToolz
pipe cutter, be removed. The rasp that
at the back of the tube cutter is here
also suitable for. As an extra, behind that
Grate another spare blade. In total a
indispensable tool for perfect abbreviations.
Often used in combination with the 16B1
from IceToolz.
This IceToolz cable cutter is a professional
cable cutter hydraulic lines. The blade in
the pliers cut the pipe from the middle.
This only creates a gap at the top
small pressure point that can be corrected
with the extra tool on the IceToolz cable cutter
This IceToolz cable cutter comes with
a spare blade (54A1S) so that you can always
is equipped with a sharp tool for the right
work. The IceToolz article number of this
cable cutter is 67B4.
Cutting hydraulic hoses or pipes
requires different pliers than others
Cables. The IceToolz cable cutter includes a blade
in a point shape. This means that from the
cut the middle of the hydraulic line and
The IceToolz cable cutter has an extra tool
with which the pressure point is neatly rounded again
can be. The cable cutter is used to
second blade included (IceToolz number
54A1S). This can also be ordered separately later.
become. Important, because a sharp knife is a
must for a correct cut.
Includes: 1 spare blade #54A1S
Cuts the hose flawlessly and prevents
deformation of the inner cable
This IceToolz lock nut remover for the
ShimanoÓ Hollowtech II cranks are a handy
workshop tool. The lock nut
buyer is made of polyoxymethylene, a
polymer known for its hardness.
Wear resistant this buyer for the
ShimanoÓ crank nut. The IceToolz
The article number of this crank nut remover is
04T1.
The buyer for the ShimanoÓ crank nut is
easy to use, much more practical if you often
is being worked with. More power can be exerted
than with most other tools.
This IceToolz lock nut remover is a popular
seen tool in professional workshops.
This IceToolz cone wrench set is a
professional set of cone wrenches that fit in no
A single workshop may be missing. The IceToolz
cone keys are made from the sturdy
chrome-molybdenum steel (Cr-Mo) which says something
about the quality of these cone keys. The
cone keys are finished with a pleasant
rubber handle. And the length of 20cm is
long enough to provide sufficient power
set. The IceToolz article number of this
cone key set is 47X3.
This IceToolz cone wrench set is made
Made of Cr-Mo steel, so nice and sturdy.
with a comfortable grip. The cone keys
are a solution for repairs where the cups
and lock nut must be loosened and the
Regular handle wrenches are too thick. The IceToolz
Cone keys then offer a solution. This set
cone wrenches are the most common sizes
Many jobs require 2 cone wrenches to
for example loosen the lock nut of the cone
turning. But it is not necessary to have a double
to buy a set of cone wrenches, often have
the cone and the lock nut are a different size. And
complete set of cone keys is sufficient per
workplace.
Key size
13 mm
15 mm
17 mm
This IceToolz cone wrench is a professional
cone wrench that should not be used in any workshop
missing. The IceToolz cone wrenches are
made of strong chrome-molybdenum
steel (Cr-Mo) which says something about the quality of
this cone wrench. The cone wrench is finished
with a comfortable rubber handle. And the length
23cm is long enough to provide sufficient
to be able to exert force. The IceToolz
The article number of this cone wrench is 4713.
This IceToolz cone wrench is made of
Cr-Mo steel, so nice and sturdy. Equipped with
a comfortable handle. The cone keys are
a solution for repairs where the cups and
lock nut must be loosened and the
Regular handle wrenches are too thick. The IceToolz
Cone keys then offer a solution.
Many jobs require 2 cone wrenches to
for example loosen the lock nut of the cone
turning. But it is not necessary to have a double
to buy a set of cone wrenches, often have
the cone and the lock nut are a different size. And
complete set of cone keys is sufficient per
workplace.
The IceToolz cone wrenches are available in sizes: 13,
14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 and
25mm
This IceToolz cone wrench is a professional
cone wrench that should not be used in any workshop
are missing. The IceToolz cone wrenches are
made of strong chrome-molybdenum
steel (Cr-Mo) which says something about the quality of
This cone wrench. The cone wrench is finished
with a comfortable rubber handle. And the length
23cm is long enough to provide sufficient
to be able to exert force. The IceToolz
The article number of this cone wrench is 4713.
This IceToolz cone wrench is made of
Cr-Mo steel, so nice and sturdy. Equipped with
a comfortable handle. The cone keys are
a solution for repairs where the cups and
lock nut must be loosened and the
Regular handle wrenches are too thick. The IceToolz
Cone keys then offer a solution.
Many jobs require 2 cone wrenches to
for example loosen the lock nut of the cone
turning. But it is not necessary to have a double
to buy a set of cone wrenches, often have
the cone and the lock nut are a different size. And
complete set of cone keys is sufficient per
workplace.
The IceToolz cone wrenches are available in sizes: 13,
14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 and
25mm
This IceToolz cone wrench is a professional
cone wrench that should not be used in any workshop
are missing. The IceToolz cone wrenches are
made of strong chrome-molybdenum
steel (Cr-Mo) which says something about the quality of
this cone wrench. The cone wrench is finished
with a comfortable rubber handle. And the length
of 23cm is long enough to provide sufficient
to be able to exert force. The IceToolz
The article number of this cone wrench is 4713.
This IceToolz cone wrench is made of
Cr-Mo steel, so nice and sturdy. Equipped with
a comfortable handle. The cone keys are
a solution for repairs where the cups and
lock nut must be loosened and the
Regular handle wrenches are too thick. The IceToolz
Cone keys then offer a solution.
Many jobs require 2 cone wrenches to
for example loosen the lock nut of the cone
turning. But it is not necessary to have a double
to buy a set of cone wrenches, often have
the cone and the lock nut are a different size. And
complete set of cone keys is sufficient per
workplace.
The IceToolz cone wrenches are available in sizes: 13,
14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 and
25mm
This IceToolz cone wrench is a professional
cone wrench that should not be used in any workshop
are missing. The IceToolz cone wrenches are
made of strong chrome-molybdenum
steel (Cr-Mo) which says something about the quality of
this cone wrench. The cone wrench is finished
with a comfortable rubber handle. And the length
23cm is long enough to provide sufficient
to be able to exert force. The IceToolz
The article number of this cone wrench is 4713.
This IceToolz cone wrench is made of
Cr-Mo steel, so nice and sturdy. Equipped with
a comfortable handle. The cone keys are
a solution for repairs where the cups and
lock nut must be loosened and the
Regular handle wrenches are too thick. The IceToolz
Cone keys then offer a solution.
Many jobs require 2 cone wrenches to
for example loosen the lock nut of the cone
turning. But it is not necessary to have a double
to buy a set of cone wrenches, often have
the cone and the lock nut are a different size. And
complete set of cone keys is sufficient per
workplace.
The IceToolz cone wrenches are available in sizes: 13,
14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 and
25mm
This IceToolz cone wrench is a professional
cone wrench that should not be used in any workshop
missing. The IceToolz cone wrenches are
made of strong chrome-molybdenum
steel (Cr-Mo) which says something about the quality of
this cone wrench. The cone wrench is finished
with a comfortable rubber handle. And the length
20cm is long enough to provide sufficient
to be able to exert force. The IceToolz
The article number of this cone wrench is 4713.
This IceToolz cone wrench is made of
Cr-Mo steel, so nice and sturdy. Equipped with
a comfortable handle. The cone keys are
a solution for repairs where the cups and
lock nut must be loosened and the
Regular handle wrenches are too thick. The IceToolz
Cone keys then offer a solution.
Many jobs require 2 cone wrenches to
for example loosen the lock nut of the cone
turning. But it is not necessary to have a double
to buy a set of cone wrenches, often have
the cone and the lock nut are a different size. And
complete set of cone keys is sufficient per
workplace.
The IceToolz cone wrenches are available in sizes: 13,
14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 and
25mm
This IceToolz cone wrench is a professional
cone wrench that should not be used in any workshop
missing. The IceToolz cone wrenches are
made of strong chrome-molybdenum
steel (Cr-Mo) which says something about the quality of
this cone wrench. The cone wrench is finished
with a comfortable rubber handle. And the length
23cm is long enough to provide sufficient
to be able to exert force. The IceToolz
The article number of this cone wrench is 4713.
This IceToolz cone wrench is made of
Cr-Mo steel, so nice and sturdy. Equipped with
a comfortable handle. The cone keys are
a solution for repairs where the cups and
lock nut must be loosened and the
Regular handle wrenches are too thick. The IceToolz
Cone keys then offer a solution.
Many jobs require 2 cone wrenches to
for example loosen the lock nut of the cone
turning. But it is not necessary to have a double
to buy a set of cone wrenches, often have
the cone and the lock nut are a different size. And
complete set of cone keys is sufficient per
workplace.
The IceToolz cone wrenches are available in sizes: 13,
14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 and
25mm
This IceToolz cone wrench is a professional
cone wrench that should not be used in any workshop
missing. The IceToolz cone wrenches are
made of strong chrome-molybdenum
steel (Cr-Mo) which says something about the quality of
this cone wrench. The cone wrench is finished
with a comfortable rubber handle. And the length
20cm is long enough to provide sufficient
to be able to exert force. The IceToolz
The article number of this cone wrench is 4713.
This IceToolz cone wrench is made of
Cr-Mo steel, so nice and sturdy. Equipped with
a comfortable handle. The cone keys are
a solution for repairs where the cups and
lock nut must be loosened and the
Regular handle wrenches are too thick. The IceToolz
Cone keys then offer a solution.
Many jobs require 2 cone wrenches to
for example loosen the lock nut of the cone
turning. But it is not necessary to have a double
to buy a set of cone wrenches, often have
the cone and the lock nut are a different size. And
complete set of cone keys is sufficient per
workplace.
The IceToolz cone wrenches are available in sizes: 13,
14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 and
25mm
This IceToolz cone wrench is a professional
cone wrench that should not be used in any workshop
missing. The IceToolz cone wrenches are
made of strong chrome-molybdenum
steel (Cr-Mo) which says something about the quality of
this cone wrench. The cone wrench is finished
with a comfortable rubber handle. And the length
20cm is long enough to provide sufficient
to be able to exert force. The IceToolz
The article number of this cone wrench is 4713.
This IceToolz cone wrench is made of
Cr-Mo steel, so nice and sturdy. Equipped with
a comfortable handle. The cone keys are
a solution for repairs where the cups and
lock nut must be loosened and the
Regular handle wrenches are too thick. The IceToolz
Cone keys then offer a solution.
Many jobs require 2 cone wrenches to
for example loosen the lock nut of the cone
turning. But it is not necessary to have a double
to buy a set of cone wrenches, often have
the cone and the lock nut are a different size. And
complete set of cone keys is sufficient per
workplace.
The IceToolz cone wrenches are available in sizes: 13,
14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 and
25mm
This IceToolz cone wrench is a professional
cone wrench that should not be used in any workshop
are missing. The IceToolz cone wrenches are
made of strong chrome-molybdenum
steel (Cr-Mo) which says something about the quality of
this cone wrench. The cone wrench is finished
with a comfortable rubber handle. And the length
20cm is long enough to provide sufficient
to be able to exert force. The IceToolz
The article number of this cone wrench is 4713.
This IceToolz cone wrench is made of
Cr-Mo steel, so nice and sturdy. Equipped with
a comfortable handle. The cone keys are
a solution for repairs where the cups and
lock nut must be loosened and the
Regular handle wrenches are too thick. The IceToolz
Cone keys then offer a solution.
Many jobs require 2 cone wrenches to
for example loosen the lock nut of the cone
turning. But it is not necessary to have a double
to buy a set of cone wrenches, often have
the cone and the lock nut are a different size. And
complete set of cone keys is sufficient per
workplace.
The IceToolz cone wrenches are available in sizes: 13,
14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 and
25mm
This IceToolz cone wrench is a professional
cone wrench that should not be used in any workshop
missing. The IceToolz cone wrenches are
made of strong chrome-molybdenum
steel (Cr-Mo) which says something about the quality of
this cone wrench. The cone wrench is finished
with a comfortable rubber handle. And the length
20cm is long enough to provide sufficient
to be able to exert force. The IceToolz
The article number of this cone wrench is 4713.
This IceToolz cone wrench is made of
Cr-Mo steel, so nice and sturdy. Equipped with
a comfortable handle. The cone keys are
a solution for repairs where the cups and
lock nut must be loosened and the
Regular handle wrenches are too thick. The IceToolz
Cone keys then offer a solution.
Many jobs require 2 cone wrenches to
for example loosen the lock nut of the cone
turning. But it is not necessary to have a double
to buy a set of cone wrenches, often have
the cone and the lock nut are a different size. And
complete set of cone keys is sufficient per
workplace.
The IceToolz cone wrenches are available in sizes: 13,
14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 and
25mm
This IceToolz cone wrench is a professional
cone wrench that should not be used in any workshop
missing. The IceToolz cone wrenches are
made of strong chrome-molybdenum
steel (Cr-Mo) which says something about the quality of
this cone wrench. The cone wrench is finished
with a comfortable rubber handle. And the length
20cm is long enough to provide sufficient
to be able to exert force. The IceToolz
The article number of this cone wrench is 4713.
This IceToolz cone wrench is made of
Cr-Mo steel, so nice and sturdy. Equipped with
a comfortable handle. The cone keys are
a solution for repairs where the cups and
lock nut must be loosened and the
Regular handle wrenches are too thick. The IceToolz
Cone keys then offer a solution.
Many jobs require 2 cone wrenches to
for example loosen the lock nut of the cone
turning. But it is not necessary to have a double
to buy a set of cone wrenches, often have
the cone and the lock nut are a different size. And
complete set of cone keys is sufficient per
workplace.
The IceToolz cone wrenches are available in sizes: 13,
14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 and
25mm
This IceToolz cone wrench is a professional
cone wrench that should not be used in any workshop
missing. The IceToolz cone wrenches are
made of strong chrome-molybdenum
steel (Cr-Mo) which says something about the quality of
this cone wrench. The cone wrench is finished
with a comfortable rubber handle. And the length
20cm is long enough to provide sufficient
to be able to exert force. The IceToolz
The article number of this cone wrench is 4713.
This IceToolz cone wrench is made of
Cr-Mo steel, so nice and sturdy. Equipped with
a comfortable handle. The cone keys are
a solution for repairs where the cups and
lock nut must be loosened and the
Regular handle wrenches are too thick. The IceToolz
Cone keys then offer a solution.
Many jobs require 2 cone wrenches to
for example loosen the lock nut of the cone
turning. But it is not necessary to have a double
to buy a set of cone wrenches, often have
the cone and the lock nut are a different size. And
complete set of cone keys is sufficient per
workplace.
The IceToolz cone wrenches are available in sizes: 13,
14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 and
25mm
This patented IceToolz chain tool is a
professional chain tool suitable for all
common derailleur chains, whether
ShimanoÓ, KMCÓ, TayaÓ or another brand.
The IceToolz chain tool is equipped with a
protective cover and a chain disassembly aid.
The chain tool has a beautiful design and is
compact enough to always take with you.
This chain tool also has a storage compartment
for the correct size missing link/spare link.
This IceToolz chain tool is made of Cr-Mo
quality steel. The IceToolz article number of
this chain tool is 61M1.
This IceToolz chain tool is a nice
designed and complete chain tool that
the compact design for every bike ride
can be taken along. This IceToolz
chain tool also has a chain-
disassembly aid built in, which makes the repair easier
on the chain makes it a lot easier. The
IceToolz chain tool is also equipped with a
extra protective cover that prevents the
chain prevents. By the protective cover on the
chain to press while using the
chain tool keeps the chain in place
lie. This is why the pin of the chain tool is
also always perpendicular to the chain pin to be driven out,
This prevents the pin from breaking off.
chain tool. Make sure the chain tool is on the pin
squeezes out far enough to release the link
pull, but not so far that the pin also comes out of the
outer link is pressed out. The chain
can be bent slightly if the chain tool is
the pin has been pressed out (almost) far enough.
IceToolz safety glasses with antistatic coating
EN 166 approved, transparent
Specifications
Å including storage bag, also suitable for the glass
to polish with
Å ergonomic, transparent all around and light in
weight
Color (base): transparent
Material: hard plastic
Application: against splashing and/or
flying particles
Weight (kg): 0.039
Quality mark: EN166
Packaging: display box
This IceToolz chain disassembly aid is a
handy aid when replacing or shortening
of the chain. The chain disassembly aid is
foldable and therefore takes up little space
the bicycle workshop. The chain removal aid
is made of durable and strong chrome-
Vanadium steel. The IceToolz article number of
This chain disassembly aid is 01A1.
This IceToolz chain disassembly aid is a
handy tool and makes at least n
hands free. This chain disassembly aid removes the
tension of the chain part where this
is loosened. This makes shortening a
much easier, because the chain remains
just in place. The chain-
disassembly aid is suitable for all
common derailleur chains, whether
ShimanoÓ, KMCÓ, TayaÓ or another brand.
