Compatible with Bafang electric motor.
Used for mounting and dismounting lock nuts.
Guide places the tool in the motor shaft.
Pull-push mechanism firmly grips the lock nut.
High torque can be applied safely.
The key does not slip during use.
To be used with Snap-in holder 77202750.
Also suitable for a 32 mm combination wrench.
Follow the manufacturer's recommended torque.
Check torque with 3/8" torque wrench 7720115.
Caution: Do not use with power tools.
Pliers for pressing in and out an inner sleeve/
plastic bushing out and into the hole provided
for a Bosch BDU31 system (Bike Drive Unit).
The inner sleeve / plastic bushing is used for
the screw connection between frame and engine.
When replacing the engine it is necessary to
to remove these inner sleeves from the frame.
Cyclus Snap-In puller for Shimano Centerlock.
Compatible with Shimano Centerlock rotors.
Index: Z16 42.3.
A holder and handle are required for use.
Tool holder article number: 77202750.
Adapters or guides may be additionally required.
The conductors are unique on the market.
Suitable for all common axle systems.
Compatible with QR and fixed axle systems.
Also suitable for HH12, HH15 and HH20.
Change the guide and start immediately.
Even the tightest discs release safely.
No risk of slipping or injury.
Parts remain undamaged.
Always follow the manufacturer's tightening torque.
Cyclus Snap.in lock nut wrench for Shimano EP8.
Suitable for Steps 6100 and 8000 motors.
The key installs and removes lock nuts.
The guide is placed in the motor shaft.
A pull-push mechanism grips the lock nut.
This ensures that the torque is transferred safely.
The key does not slip under high torque.
To be used with Snap-in holder 77202750.
Also suitable for a 32 mm combination wrench.
Follow the manufacturer's recommended torque.
Use a 3/8" torque wrench 7720115.
Caution: Do not use with power tools.
Bent ring spanner 6X7 102
Ring spanner bent 18X19 102
Ring spanner bent 10X11 102
Ring spanner bent 21X23 102
Bent ring spanner 8X9 102
Ring spanner bent 14X15 102
Ring spanner bent 20X22 102
Bent ring spanner 16X17 102
Bent ring spanner 12X13 102
Areas of application:
Suitable for structural steel up to a tensile strength
of 1000 N/mmý, cast iron, non-ferrous metals, in
hand and column machine.
Features:
? High stability and break resistance
Made of HSS steel
? The drill does not jam because the outer diameter,
from the tip to the shaft, gradually
becomes smaller
? The diameter of the core increases in the direction
off the axis
? Precise drill holes
The drill is smoothed and ground for precision
to guarantee when drilling
? Thanks to the special diamond shape with split
point means you don't need to use any force to center it
to exert pressure on the workpiece before
making perfectly round holes
? The point angle is 130ø thanks to the split point
which also provides a large point angle
center point
? The full working length of the drill is
resharpenable
415x188x44.5mm
Phillips screwdrivers
Size: 0 x 60
Size: 1 x 100
Size: 2 x 125
Slotted screwdrivers
Size: 3 x 80
Size: 4 x 100
Size: 5.5 x 125
Size: 6.5 x 250
415x188x44.5mm
Socket screwdrivers
7720633 Size: 5.5 x 125 mm
7720634 Size: 8 x 125 mm
7720635 Size: 10 x 125 mm
Torx screwdrivers
7720525 Size: 6 x 50 mm
7720526 Size: 8 x 60 mm
7720527 Size: 10 x 80 mm
7720528 Size: 15 x 80 mm
7720529 Size: 20 x 100 mm
7720530 Size: 25 x 100 mm
7720531 Size: 30 x 115 mm
