Shimano lockring/circlip remover
Article number: TL-FC41
Suitable for direct mount tooth blade disassembly
suitable for the following cranksets
-M9100
-M9120
-M9130
-M8100
-M8120
-M8130
-M7100
-M7120
-M7130
-M6100
-M6120
With reversible insert pin
to be used for the following brake systems:
Shimano (no original spare part)
Magura (no original spare part)
Hayes (no original spare part)
Tektro (no original spare part)
The IceToolz cassette remover for the
cassette lockring is a commonly used item in a
frequently used item in a bicycle workshop. This
buyer, made of chrome vanadium, guarantees
for a long life. This cassette remover
has a 12mm guide pin for hubs with
through axles and can be used with a «Ä
socket wrench (IceToolz number 53R4) or a 21mm
wrench (IceToolz number 4721). The IceToolz
cassette collector is suitable for:
ShimanoÓ CS, SRAM, SunRace, Chris King compatible
cassettes and ShimanoÓ Center Lock disc brakes.
The IceToolz article number of this HG customer is
09C2.
key for Fixie, Fixed Bikes, track bike,
track bike, BMX,
Circlip wrench (hook wrench)
also suitable for the retaining ring of the
BMX cassette hub and bottom bracket, bottom bracket ring
to fix or disassemble
The IceToolz bottom bracket headset lockring tool is a
easy tool to use correctly, without the
frame and/or lockring to damage, the
lockring of the bottom bracket cup or headset cup to loosen
turning. This lockring tool with IceToolz
Catalogue number 11H1 is suitable for various
sizes of lock rings. With these Cr-Mo steel
lockring tool you have something decent in your hands.
With this lockring hook it is possible to
to loosen the lockring correctly without
frame to be damaged. Take care, especially with the
bracket cup, on the opposite thread. At
For the bracket this tool is often used
combination used with the adjustable
bottom bracket pliers 11A0 from IceToolz.
Key for Fixie, Fixed Bikes, track bike,
track bike, BMX,
Circlip wrench (hook wrench)
Also suitable for the retaining ring of the
BMX cassette hub and bottom bracket, bottom bracket ring
to fix or disassemble
Suitable for removing the front
gear of a Bikkel Tuba.
This patented IceToolz cable and
spoke cutter is a unique pair of pliers with a legion
of possibilities The small opening cuts
effortlessly through everything with a diameter smaller
than 3.5mm. The cable and spoke cutter can
here the spokes are also on without any difficulty.
way of cutting it is suitable for
inner cables, the inner cables are not
flattened and therefore out of the structure
taken. The outer cables are for the larger
opening of the cable and spoke cutter also
no problem at all. And the Kevlar cable grommet, which
after cutting what is bent, you can use this
can be repaired in one go by means of
of the pen in the orange cap on the cable and
spoke cutter. In addition to these functions, it is also
possible to have both sizes of end caps
mount to the inner and outer cable. The
IceToolz article number of this cable and
spoke cutting pliers is 67A5.
This IceToolz cable and spoke cutter is
a unique and patented cutting pliers that
his way of cutting is first of all suitable
for cutting both internal and external
outdoor cables. Because the cable and
spoke cutters around the inner cable
cuts, towards the center, keep the
individual wires of the inner cable in the
original twisted structure and
one does not experience any hindrance from protruding
wires when inserting the inner cable into the
outer cable. In addition, this cable and
spoke cutter of such a quality that
the cable and spoke cutters are no problem at all
has with cutting a spoke. The
larger opening is suitable for the
cutting the outer cable and the orange
tab can be used to secure the kevlar
cable grommet to be nicely round again after cutting
to get.
Also the two end caps for both outside and
can be connected within the cable without having to
damage, be clamped to the cable with
the special openings of these cable and
spoke cutter
TL-CT12 successor to the TL-CT11
improved version
equipped with a needle for the outer cable
to reshape
built-in crimp for cable ends
suitable for
-cutting inner cables
-cutting outer cable
durable carbon steel for stiffness
and sustainability
The IceToolz Allen key set contains the three most
used allen keys. These allen keys
fit comfortably in the hand due to the ergonomic design
handle. Allen key set is made of wear-resistant
steel. The IceToolz article number of this
combination allen key is 70TA.
This handy Allen key set contains the three
most commonly used sizes. The ball head end of
This Allen key also makes that difficult to
reach Allen bolts easy to loosen
These are the Allen keys that others are for.
to remain lying down.
4, 5, 6 mm with ball head version
Ergonomic T-grip handle
