Areas of application
Suitable for structural steel up to a tensile strength
of 1000N/mmý, cast iron, non-ferrous metals,
in hand and column drills.
Properties
* High service life and fracture resistance,
made of bright HSS steel
* Accurate drill holes, because the
drill as a single piece from a hardened pin
is sharpened
* Due to the special split point grind,
No need to pre-center and
when turning on the workpiece less
to apply force to the drill
* The point angle is 130ø. This in combination with the
Ãsplit pointÄ grind ensures that the
drill bites less quickly and in thin material
makes round holes
* The drill does not get stuck because the
outer diameter gradually becomes smaller
from the tip to the shaft (reduction)
* High stability and less vibration
because the diameter of the core in the
direction of the shaft increasingly greater
is becoming
* The drill is over the entire working length
resharpenable
Remark
Use Berner drilling and cutting oil to
to cool and lubricate during drilling
? Practical box with all relevant R-TX bits and
magnetic holder.
? Easy to open and loose bits are
easy to grab.
? Screwdriver bits for professional users for
manual or machine screwing.
? Set consists of:
- 421276 screwdriver bit R-TX
- 421277 screwdriver bit R-TX
- 421278 screwdriver bit R-TX
- 421279 screwdriver bit R-TX
- 421280 screwdriver bit R-TX
- 421281 screwdriver bit R-TX
- 421282 screwdriver bit R-TX
- 51730 bit holder standard 1/4 60mm
Powerful and wind-resistant flame, very suitable
for outdoor work
40 ml refillable gas tank
Adjustable flame temperature and power
Flame temperature up to 1350 øC
Weight 305 g
Gas Butane
Never waste time searching again
to the correct links
Brake hose measuring tool set with
universal inserts.
Handy tool for finding unknown brake hoses
to measure and select the correct type of hose insert
select.
Contains 4 of each type of insert.
Packaged in a luxurious storage box.
Compatible with Bafang electric motor.
Used for mounting and dismounting lock nuts.
Guide places the tool in the motor shaft.
Pull-push mechanism firmly grips the lock nut.
High torque can be applied safely.
The key does not slip during use.
To be used with Snap-in holder 77202750.
Also suitable for a 32 mm combination wrench.
Follow the manufacturer's recommended torque.
Check torque with 3/8" torque wrench 7720115.
Caution: Do not use with power tools.
Pliers for pressing in and out an inner sleeve/
plastic bushing out and into the hole provided
for a Bosch BDU31 system (Bike Drive Unit).
The inner sleeve / plastic bushing is used for
the screw connection between frame and engine.
When replacing the engine it is necessary to
to remove these inner sleeves from the frame.
Cyclus Snap-In puller for Shimano Centerlock.
Compatible with Shimano Centerlock rotors.
Index: Z16 42.3.
A holder and handle are required for use.
Tool holder article number: 77202750.
Adapters or guides may be additionally required.
The conductors are unique on the market.
Suitable for all common axle systems.
Compatible with QR and fixed axle systems.
Also suitable for HH12, HH15 and HH20.
Change the guide and start immediately.
Even the tightest discs release safely.
No risk of slipping or injury.
Parts remain undamaged.
Always follow the manufacturer's tightening torque.
Cyclus Snap.in lock nut wrench for Shimano EP8.
Suitable for Steps 6100 and 8000 motors.
The key installs and removes lock nuts.
The guide is placed in the motor shaft.
A pull-push mechanism grips the lock nut.
This ensures that the torque is transferred safely.
The key does not slip under high torque.
To be used with Snap-in holder 77202750.
Also suitable for a 32 mm combination wrench.
Follow the manufacturer's recommended torque.
Use a 3/8" torque wrench 7720115.
Caution: Do not use with power tools.
