This IceToolz chain disassembly aid is a
handy aid when replacing or shortening
of the chain. The chain disassembly aid is
foldable and therefore takes up little space
the bicycle workshop. The chain removal aid
is made of durable and strong chrome-
Vanadium steel. The IceToolz article number of
This chain disassembly aid is 01A1.
This IceToolz chain disassembly aid is a
handy tool and makes at least n
hands free. This chain disassembly aid removes the
tension of the chain part where this
is loosened. This makes shortening a
much easier, because the chain remains
just in place. The chain-
disassembly aid is suitable for all
common derailleur chains, whether
ShimanoÓ, KMCÓ, TayaÓ or another brand.
This IceToolz brake caliper alignment tool is a
simple aid to quickly fit the brake caliper
correct place to mount or adjust. The
IceToolz article number of this brake caliper
straightening tool is 55B3.
To install the brake caliper correctly, the
brake caliper on both sides at equal distance from
the brake disc. By this brake caliper
place the alignment tool on the disc and
then keep the brake pressed, on the
moment the brake caliper is mounted but
definitely not locked, centers the brake caliper
themselves and the brake pads still have the
correct distance to the brake disc. With squeezed
tighten the brake caliper and the job is done
done quickly with this IceToolz brake caliper
alignment tool.
This IceToolz bracket wrench is suitable for
bracket cups with a diameter of 46mm. This is
the BSA30 bracket. The BSA30 bracket is often
used with SRAMÓ DUBÉ, Race FaceÓ CinchÉ,
RotorÓ BSA30, ZippÓ VumaÉ, Hawk RacingÉ
BB3086É, and more. The IceToolz bracket wrenches
are provided with a recess where a
torque ratchet wrench can be connected
so that the bracket is tightened at the correct moment
can be tightened. IceToolz
article number 11C7.
This IceToolz bracket wrench is equipped with
a «Ä connection where the (IceToolz) moment-
ratchet wrench can be connected so that the
bracket cup tightened to the correct torque
can be. The bracket wrench fits comfortably in the
hand and through the wide opening of this
bracket key makes it easy to quickly
to get the bracket wrench over the bracket cup
without damage.
This IceToolz multi pedal wrench is a
pedal wrench for the 15mm connection of
almost any pedal with a pedal on the other side
hook and a freewheel remover. The 23cm
long pedal wrench is long enough to fit properly
to apply force and still get the stuck pedal
to loosen. The rubber grip is comfortable in the
hand. With this Cr-Mo steel pedal wrench you have
you have something solid in your hands.
This pedal key is such an example of this.
This pedal wrench is made of strong Cr-Mo
steel so it can withstand a blow. Because of the
rubber grip makes it easy to hold and
the 14mm and 15mm socket wrenches are often needed
when tinkering with bicycles. That's why I end up
This pedal key is often found in the back pocket of a
bicycle repair shop: always at hand. Pay attention to the
orange detail: the professional's choice.
This IceToolz bracket wrench is suitable for
bracket cups with a diameter of 44mm. This is
the normal BSA bracket for 24mm axles. The
BSA bracket is often used for
ShimanoÓBB80, BB5700, XTÓ BB70, BB51, and
previous external bottom bracket bearings, external bottom bracket
bearings for CampagnoloÓ, Chris KingÓ, FSAÓ
MegaExoÓ, SRAMÓ / TruvativÓ GXPÓ, Race FaceÓ
X-type, SurlyÓ, WheelsÓ, FulcrumÓ, Hope É (non-
BSA30) and others. The IceToolz bracket wrenches
are provided with a recess where a
torque ratchet wrench can be connected
so that the bracket is tightened at the correct moment
can be tightened. IceToolz
article number 11C1.
This IceToolz bracket wrench is equipped with
a «Ä connection where the (IceToolz) moment-
ratchet wrench can be connected so that the
bracket cup tightened to the correct torque
can be. The bracket wrench fits comfortably in the
hand and through the wide opening of this
bracket wrench makes it easy to quickly
to get the bracket wrench over the bracket cup
without damage.
This IceToolz bracket wrench is suitable for
bracket cups with a diameter of 41mm. This is
the BBR60 bracket. The BBR60 bracket is
often used with ShimanoÓ UltegraÓ 6800 (11-
speed) and the ShimanoÓ MT-800. The IceToolz
Bracket keys are provided with a «Ä
recess for a torque ratchet wrench
can be connected so that the bracket with
can be tightened to the correct torque.
IceToolz article number 11C3.
This IceToolz bracket wrench is equipped with
a «Ä connection where the (IceToolz) moment-
ratchet wrench can be connected so that the
bracket cup tightened to the correct torque
can be. The bracket wrench fits comfortably in the
hand and through the wide opening of this
bracket key makes it easy to quickly
to get the bracket wrench over the bracket cup
without damage
IceToolz 12-Tooth Bottom Bracket Installation Tool.
Suitable for Hawk RacingÉ, RaceFaceÓ,
RotorÓ, ZippÓ and other similar external
bottom bracket systems. Hardened Cr-Mo steel. For
use with 1/2 Inch key holder (#53R4)
The IceToolz bottom bracket press is an indispensable tool in
the workshop. To prevent wear on bearings, and
more importantly, preventing the ash is of great importance
It is important that the bearings are completely flat in relation to
can be mounted from each other. This is possible with
this bottom bracket press. Fast and professional. The
IceToolz bottom bracket press is equipped with a
ergonomic grip. The IceToolz
The article number of this bottom bracket press is 11R3.
With this IceToolz bottom bracket press, virtually all
to install press-in bearings. Below is a
enumeration in the knowledge that there
most likely another pair of bottom brackets
types are missing. Developments are going very fast
hard and every bicycle manufacturer develops a
own bottom bracket. Generally speaking, all
bottom brackets both the 24mm version and the 30mm
version. The IceToolz bottom bracket press is also available
taking into account the Sram GXPÓ bottom bracket,
in other words, the 22mm version can also be pressed flat
are made with this bottom bracket press.
By mounting the bearings 100% flat with this
bottom bracket press prevents bearings from going
squeaking and creaking. Also wear and tear on the bearings
is limited by placing them parallel to each other
assemble. Perhaps even more important: the
wearing in the bottom bracket can also be done with this
be prevented. The IceToolz bottom bracket press
can therefore prevent a lot of misery.
The IceToolz bottom bracket press is suitable for use under
other: BB30, BB86, BB89, BB90, BB91, BB92,
Sram GXPÓ, BB386, PressFit and more.
With this 8-notch bracket tool you can combine
with the headset wrench (IceToolz number 06F2)
the 8-lug ISIS driveÓ bottom bracket cup from the frame
be turned without moving the frame
damage. The 8-notch bracket tool is made
made of Cr-Mo steel and is therefore guaranteed
long lifespan. The IceToolz article number
of the bottom bracket tool is 11D3.
Suitable for Tube Gates.
This IceToolz bracket wrench is suitable for the
ISIS DriveÓ and the ShimanoÓ bottom brackets with a
20-spline (20-lug) connection. The IceToolz
bracket key is equipped with a 32mm hexagon
where the 32mm headset wrench (06H8) fits.
IceToolz article number 11B3.
This IceToolz bracket wrench is equipped with
a 32mm key fit that allows the
bracket cup can be loosened.
This IceToolz crank adapter is a Cr-Mo
adapter for loosening or tightening
a ShimanoÓ Hollowtech2 bearing cup. The
chrome vanadium quality of this
crank adapter guarantees a long life.
The ShimanoÓ crank adapter can be used on both sides
be used and with an 8mm Allen key
(IceToolz 35V8) can be used for force. The
reverse side of crank adapter can be used
be used to cover the ShimanoÓ
to loosen the crank. The IceToolz
The article number of this cone wrench is 11F3.
This crank adapter from IceToolz is indispensable if
a ShimanoÓ crank is mounted or
must be disassembled. The cover nut can
be loosened with the small 8-lug side
of the crank adapter and the ShimanoÓ
Hollowtech2 bearing cups can be mounted or
be disassembled with the other side of
the crank adapter, the 16-cam take-off. For the
cover nut are the ridges on the side of the
crank adapter often sufficient to provide enough power
to be able to place, but for the bearing cup
Assembly requires an 8mm Allen key
(IceToolz 35V8).
If the bearing cups are tightened with a torque wrench
(IceToolz E211) must be secured is the
IceToolz adapter D8D4 a solution. This adapter
can be clicked onto the «Ä torque wrench and
the reverse side fits this crank adapter.
on map
This IceToolz Allen key has a
ergonomic handle and can be used on both sides
use. One side of the Allen key
2.5mm is a ball head or a spherical head. The
other side, the short one is a straight hexagon.
These Allen keys are comfortable to hold due to
the ergonomic handle. The ball head
ensures that even the difficult to reach
Allen screws are accessible. The IceToolz
article number of this Twinhead Allen key
is 7M25.
This handy Allen key is also available as
complete Allen key set (IceToolz
article number 7M85). The set then contains the 2, 3,
4, 5, 6 and 8mm Allen key Twinhead plus the
Twinhead T25 Torx wrench. The ball head end
This Allen key also makes it difficult to
reach Allen bolts easy to loosen
are. As a set, the Allen keys are in a nice
holder that can be used both standing and hanging
can be.
