The LTX7A-BS motorcycle battery, 12 volts, 6 Ah, is a starter battery with AGM technology. The LTX7A-BS starter battery is dry pre-charged and comes standard with a suitable acid pack. This lead-acid battery is, after filling and charging, 100% maintenance-free and leak-proof. It can be mounted in a tilted position up to 45°. The LTX7A-BS is a true all-rounder and suitable for seasonal use and short distances. Technical specifications Volts (V) 12 Capacity (Ah) 6 (10hr) CCA (A/EN) 105 Length (mm) 150 Width (mm) 87 Height (mm) 93 Total height (mm) 93
The SLA 12-4S motorcycle battery, 12 volts, 5 Ah, is a starter battery with AGM technology. The SLA 12-4S is factory-activated (filled and charged) and therefore ready for immediate use upon delivery. This lead-acid battery is leak-proof and maintenance-free. It can be mounted in a tilted position up to 90°. The SLA 12-4S is a true all-rounder and suitable for seasonal use and short distances. Technical specifications Volt (V) 12 Capacity (Ah) 5 (10hr) CCA (A/EN) 50 Length (mm) 113 Width (mm) 70 Height (mm) 85 Total height (mm) 85
The LTX7A-4 motorcycle battery, 12 volts, 7 Ah, is a starter battery with gel technology. The LTX7A-4 starter battery is factory activated (filled and charged) and therefore immediately ready for use. This gel battery is 100% leak-proof and can be mounted in a tilted position up to 90°. The LTX7A-4 delivers more starting power than a conventional battery and is suitable for modern motorcycles and powersport vehicles. Technical specifications Volt (V) 12 Capacity (Ah) 7 (10hr) CCA (A/EN) 125 Length (mm) 150 Width (mm) 87 Height (mm) 94 Total height (mm) 94
The LTX7L-BS motorcycle battery, 12 volts, 6 Ah, is a starter battery with AGM technology. The LTX7L-BS starter battery is dry pre-charged and comes standard with a suitable acid pack. This lead-acid battery, after filling and charging, is 100% maintenance-free and leak-proof. It can be mounted in a tilted position up to 45°. The LTX7L-BS is a true all-rounder and suitable for seasonal use and short distances. Technical specifications: Voltage (V) 12, Capacity (Ah) 6 (10hr), CCA (A/EN) 100, Length (mm) 113, Width (mm) 70, Height (mm) 130, Total height (mm) 130
Protect valuables on every motorcycle trip with a waterproof dry bag, specially designed for motorcyclists. Whether it's an adventurous ride through rainy weather or a journey on dusty roads, this dry bag is guaranteed to keep your belongings dry and dust-free. Suitable for use in top cases and side cases, this inner bag offers protection for up to 25 liters of luggage. Thanks to the compression valve, excess air can be easily removed from the bag, keeping it compact and saving space. The convenient roll-top closure on both sides allows for quick and easy access to luggage. Waterproof inner bag / dry bag.
Keep valuable luggage dry in top and side cases, etc.
For 25 liters of luggage. air can easily be 'squeezed' out using a compression valve.
Convenient roll-top closure on both sides.
Material: 65% TPU / 35% Polyester
Dimensions: 81x38 cm
Color: Black
Protect valuables on every motorcycle trip with a waterproof dry bag, specially designed for motorcyclists. Whether it's an adventurous ride through rainy weather or a journey on dusty roads, this dry bag is guaranteed to keep your belongings dry and dust-free. Suitable for use in top cases and side cases, this inner bag offers protection for up to 10 liters of luggage. Thanks to the compression valve, excess air can be easily removed from the bag, keeping it compact and saving space. The convenient roll-top closure on both sides allows for quick and easy access to your luggage. Waterproof inner bag / dry bag.
Keep valuable luggage dry in top and side cases, etc.
For 10 liters of luggage. air can easily be 'squeezed' out using a compression valve.
Convenient roll-top closure on both sides.
Material: 65% TPU / 35% Polyester
Dimensions: 60x35 cm
Color: Black
The DS COVERS luggage bag is the indispensable companion for any motorcycle holiday. The reliable roll-top closure and heat-sealed seams keep items dry and clean, no matter how spectacular the ride. Thanks to the universal attachment system of strong hooks and elastic straps, the bag fits effortlessly on (almost) any motorcycle and stays securely in place. Once at your destination, the bag is super easy and comfortable to carry thanks to the handles and an adjustable shoulder strap. Made of durable tarpaulin (92% PVC and 8% polyester), the bag allows you to confidently embark on your next motorcycle adventure, time and again, regardless of the (weather) conditions. Handy and flexible luggage bag for every motorcycle adventure.
Space for 60 liters of luggage.
Waterproof (IP X5) thanks to sturdy roll-top closure and thermo-sealed seams.
Easy to attach to the back of (almost) any motorcycle.
Equipped with multiple strong hooks/eyes. With strong elastic binders (2 pcs.) for fastening.
Easy to carry thanks to handles and adjustable shoulder strap.
Material: 92% PVC / 8% Polyester
Weight: 1,240 grams
Dimensions: 55x32x52 cm
Color: Black
The ALFA Topcase motorcycle cover is specifically designed for larger motorcycles with a top case. This cover has the same specifications as the regular ALFA motorcycle cover, with the added benefit of extra space at the rear where the top case is located. This allows the top case to remain on the motorcycle when the cover is in use. The ALFA Topcase cover is available in sizes L, XL, and XXL. Aside from the provision for the top case, the other dimensions are the same as the regular ALFA motorcycle cover. License plate window: When parking your motorcycle/scooter in public spaces, you must ensure the license plate is visible. Failure to do so may result in a fine. The ALFA motorcycle cover is also available with a license plate window specifically for this purpose. We provide model-specific sizing recommendations for the brands listed below. If your motorcycle is not listed, you can follow the measuring instructions to determine the correct size. Aprilia | BMW | Ducati | Harley Davidson | Honda | KTM | Kawasaki | Suzuki | Triumph | Yamaha Measuring Instructions Determine the size of the motorcycle cover by measuring the length, width, and height of your motorcycle and comparing them to the dimensions in the table below. The correct size is a cover length that is approximately 5-10 cm greater than the motorcycle length. For good ventilation, we recommend always letting the cover reach approximately 10-20 cm above the ground. This allows air to enter the cover from below and escape through the ventilation openings at the top. If in doubt between two sizes, choose the larger of the two. Because the hem is elasticated, the cover always fits well. Length | Width | Front Height | Back Height Size L 229 cm 99 cm 135 cm 125 cm Size XL 246 cm 104 cm 137 cm 127 cm Size XXL 264 cm 105 cm 140 cm 130 cm
The ALFA Topcase motorcycle cover is specifically designed for larger motorcycles with a top case. This cover has the same specifications as the regular ALFA motorcycle cover, with the added benefit of extra space at the rear where the top case is located. This allows the top case to remain on the motorcycle when the cover is in use. The ALFA Topcase cover is available in sizes L, XL, and XXL. Aside from the provision for the top case, the other dimensions are the same as the regular ALFA motorcycle cover. License plate window: When parking your motorcycle/scooter in public spaces, you must ensure the license plate is visible. Failure to do so may result in a fine. The ALFA motorcycle cover is also available with a license plate window specifically for this purpose. We provide model-specific sizing recommendations for the brands listed below. If your motorcycle is not listed, you can follow the measuring instructions to determine the correct size. Aprilia | BMW | Ducati | Harley Davidson | Honda | KTM | Kawasaki | Suzuki | Triumph | Yamaha Measuring Instructions Determine the size of the motorcycle cover by measuring the length, width, and height of your motorcycle and comparing them to the dimensions in the table below. The correct size is a cover length that is approximately 5-10 cm greater than the motorcycle length. For good ventilation, we recommend always letting the cover reach approximately 10-20 cm above the ground. This allows air to enter the cover from below and escape through the ventilation openings at the top. If in doubt between two sizes, choose the larger of the two. Because the hem is elasticated, the cover always fits well. Length | Width | Front Height | Back Height Size L 229 cm 99 cm 135 cm 125 cm Size XL 246 cm 104 cm 137 cm 127 cm Size XXL 264 cm 105 cm 140 cm 130 cm
The Edge body kit, suitable for Yamaha Aerox and Nitro models up to 2014, offers owners the chance to give their scooter a fresh look. With nine pieces included, you can replace damaged parts and add aesthetic upgrades. Thanks to its high-quality construction, this kit fits precisely and provides a professional finish. Give your scooter a fresh look on the road with the Edge body kit. This kit includes the following nine pieces: Front mudguard
Side panel (Z-plate): left and right
Engine screen: left and right
Forefront
Lower front
Front handlebar cover
Counter house
Complete 5-piece fairing set suitable for Piaggio Zip-SP. This set fits both 2-stroke and 4-stroke models from 2000 onwards. It includes a Zip SP front fender. This set includes the following parts: Forefront
Front mudguard
Side screens in one piece
Steering cover
Front grille on top
Complete 5-piece fairing set suitable for Piaggio Zip-SP. This set fits both 2-stroke and 4-stroke models from 2000 onwards. It includes a Zip SP front fender. This set includes the following parts: Forefront Front mudguard
Side screens in one piece
Steering cover
Front grille on top
![handlebar cover Piaggio original bottom [notte] matt black 99/C sprint 1b001231000nv](//toptierparts.nl/cdn/shop/files/37368.jpg?v=1770913169&width=645)
![Handlebar cover Piaggio original top [night] matt black 99/C sprint 1b000071000nv](//toptierparts.nl/cdn/shop/files/37367.jpg?v=1770913168&width=645)
![handlebar cover Piaggio original bottom [notte] matt black 99/C sprint 1b001231000nv](http://toptierparts.nl/cdn/shop/files/37368.jpg?v=1770913169&width=645)
![Handlebar cover Piaggio original top [night] matt black 99/C sprint 1b000071000nv](http://toptierparts.nl/cdn/shop/files/37367.jpg?v=1770913168&width=645)
