This SUPERB range is designed for reliability and ease of use. Internal Cable Routing Tool Super B TB-IR20. Superb other. Internal Cable Routing Tool Super B TB-IR20 Super B classic for easy insertion of outer cables, brake lines, Di2 cables, through magnetic guidance from the outside 1.3 m guide rope
This Shimano shifter is designed for reliability and ease of use. Shimano TL-LR11 brake disc circlip remover. Other Shimano disc brakes. Brake disc circlip remover Shimano TL-LR11 Lockring tool for installing and removing the SM-RT10 brake rotor. Shimano tools are designed to perfectly fit Shimano components. The tooth profile of the pickup matches that of the components exactly, including tolerances.
This EDGE range is designed for reliability and ease of use. Cable tensioner Edge. Edge other. Cable tensioner Edge Edge cable tensioning pliers for easy adjustment of the inner cables
Elvedes multitool for fixed or
loosening a Centra-lock/Centerlock
brake disc lockring or hollow bottom bracket (such as Shimano
BB51/BB52 HolloTech II etc.), directing a
brake disc repositioning of the piston
brake disc and tightening a hexagon bolt.
The IceToolz brake shoe adjuster is a great
Handy device. Suitable for various sizes
brake pads and rims. With the brake shoe straightener
adjust the brake shoe to the correct height,
distance to rim in the correct toe-in. The
brake shoe adjuster indicates by means of a
clear arrow indicating the front/direction of travel.
IceToolz article number of the
brake shoe straightener is 55B1.
The IceToolz brake shoe straightener is a tool for
professional and do-it-yourselfer. With the arrow towards
the direction of travel of the wheel over the rim
The ideal position for the brake pads is clamped
determine.
If the brake pads are completely parallel to the rim
If they are placed there is a good chance that they will
squeak. The brake pads should be toe-in
be placed. This means that the front
of the brake pads slightly closer to the rim
then point to the back. With this slant,
toe-in has already been taken into account
brake shoe adjuster. The front of the
brake shoe straightener is slightly thinner than the
back. The correct height can also be easily
can be determined with the brake shoe straightener.
Mount the brake pads against the top edge
of the brake shoe adjuster and the
brake shoe/pads are in the correct position.
This IceToolz spare blade is for the IceToolz
cable cutter for hydraulic lines.
The IceToolz article number of this spare blade is
54A1S.
The blade for the Icetoolz cable cutter hydraulic
pipes is a sharp product that lasts a long time.
But of course a knife is a wear product and
it may need to be replaced at some point.
This spare blade for the IceToolz cable cutter has
article number 54A1.
This IceToolz brake caliper alignment tool is a
simple aid to quickly fit the brake caliper
correct place to mount or adjust. The
IceToolz article number of this brake caliper
straightening tool is 55B3.
To install the brake caliper correctly, the
brake caliper on both sides at equal distance from
the brake disc. By this brake caliper
place the alignment tool on the disc and
then keep the brake pressed, on the
moment the brake caliper is mounted but
definitely not locked, centers the brake caliper
themselves and the brake pads still have the
correct distance to the brake disc. With squeezed
tighten the brake caliper and the job is done
done quickly with this IceToolz brake caliper
alignment tool.
For mineral and Dot oil.
Universal inc. all adapters.
For mineral and DOT oil.
Universal including the following adapters
Avid - Hayes - Magura - Shimano
Formula - Tektro - Elvedes
Workshop display to
5 professional bleeding sets to store.
The starter kit contains 4 bleeding sets:
2023102 Shimano
2023103 SRAM
2023104 Magura
2023105 Tektro
Use the Bleed Station as a counter
or wall display.
Dimensions 41 x 29 x 16 cm
An advanced service kit for both the
home mechanic as the bicycle repairman. Contains all
parts and tools needed to
TRP and Tektro brakes to be maintained. Only the
adding mineral oil is necessary.
Contains the following articles:
Å Two premium syringes with threaded hoses
Å Hose clamps for 5.0 mm and 5.5 mm
Å Bleed blocks for 2 and 4 caliper brakes
pistons, for 4mm and 5mm brake pads
Å Assortment of inserts, olives and ferrules for
5.0mm and 5.5mm pipe
Hose diameters:
Å DH-R EVO, Quadiem, Slate T4: 5.0mm
Å All other TRP and Tektro brakes: 5.5mm
Compatible with all brake systems from: Shimano, SRAM, Magura, Avid, Tektro, Formula and Hayes Contents: Plastic funnel with brass connector and plunger Drain bottle with hook 3 x syringes 3 x double locking connectors Bleeding Edge tool Assortment of adapters and storage box (M4, M5 short, M5 long, M5 male main, M6 short, M6 long, M6 SRAM, M6 Magura, M7) Assortment of bleed blocks (Road, 2-piston, 4-piston) T-handle wrench with bit set and storage box 7 mm combination wrench Pair of latex gloves
Specifications
Å Universal kit for all hydraulic
disc brake systems
Å Compatible with AVIDÓ, FORMULAÓ, HAYESÓ,
HOPEÓ, MAGURAÓ, ShimanoÓ
Includes: One pair of NBR gloves (#17G3)
Å Reusable pull strip for fastening the
oil hoses on the brake calipers and 2 clamps
to stop the flow of oil
Å New oil guns with adapter for a
good attachment of the oil hoses
Å suitable for use with Mineral and DOT oil
Suitable for AVIDÓ, FORMULAÓ, HAYESÓ,
HOPEÓ, MAGURAÓ, ShimanoÓ
Suitable for use with Mineral and DOT oil
Reusable pull strip for fastening the
oil hoses on the brake calipers and 2 clamps
to stop the flow of oil
Includes 1 pair of nitrile rubber gloves
(#17G3)
New oil guns with adapter for good
confirmation of the oil hoses
