PTO MoS2 is a highly penetrating,
rust-loosening fluid, which is used under the
formed rust layer of rusted metal parts
PTO MoS2 contains additives which
the well-known dry lubricant Molybdenum sulfide
(MoS2) and colloidal graphite, which makes the product
excellent lubrication and extra protection
protects against corrosion and wear.
Application:
PTO MoS2 is suitable for making
all metal parts stuck to rust such as
bolts, screws, nuts, hinges, etc.
outer packaging: 12 x 300 ml pump spray
Replacement for the 02019
Previously 110 ml.
Scoogear 75W-90 is an extremely modern
synthetic transmission oil specially developed
for scooters. By using
thin-liquid, synthetic base oils in
combination with the use of advanced
additives, the following properties are
obtained:
- Good 'Extreme Pressure' properties for
extra protection against wear
- Very good resistance to high
operating temperatures resulting in a lower
oil lifespan
- Excellent switching performance, both at extreme
low temperatures as well as extremely high temperatures
- Prevents foam formation
Application:
Scoogear 75W-90 is specially developed for
optimal use in the most heavily loaded
transmissions of the current generation of scooters.
Outer packaging: 12 x 100 ml bottles
Ceramic grease
Gear Grease EP 00/000 is semi-liquid,
multipuerpose fat based on good
refined, highly viscous base oils with a
lithium soap as a thickener.
'Extreme Pressure' and other additives are
added to have the following properties
to acquire:
- Strong adhesion to metal
- Excellent water displacement
- Very good stability
- Good anti-corrosion and anti-wear properties
- Very good pumpability
- Excellent 'Extreme Pressure' properties
Application:
Gear Grease EP 00/000 is extremely suitable for
central greasing systems and for closed, but
non-oil-tight gearboxes.
Outer packaging: 6 x 600 gr jar
GM Dexron II D (obsolete)
Caterpillar TO-2
Allison: C-4
Renk
Voith G 607/ H55.6335.34
Ford: Mercon
Ford M2C-138CJ/M2C-166H
ZF: TE-ML 09/11/14
Mercedes Benz: 236.1/5/7/9
Denison HF-0
MAN 339D / MAN 339 V1 & 339 Z1
The Eurol Ultrance VCC 0W-20 is suitable for the
latest generation Volvo D4, T5 and T6 engines
from 2013. These engines can be found in
the Volvo models S60, V40, V60, XC60, V70,
XC90 and S80.
The Eurol Ultrance VCC 0w-20 is official
approved by Volvo (volvo VCC RBS0-2AE 0W-20
- Service Fill).
- Excellent lubrication and cleaning
- Dispersive and detergent, which makes the engine
stays clean
- Protected against rust and corrosion
- High thermal stability under heavy
operating conditions
- Fuel saving
- Stable lubricating film at cold start
- Suitable for extended maintenance intervals
up to 30,000 kilometers if prescribed
ACEA A1/B1
Eurol Marine Grease is a grease based on
high-quality refined base oils with a high
viscosity. It is developed for applications
where lubrication points are exposed to water.
This grease exceeds the water-repellent properties
calcium saponified fats and has the
excellent mechanical stability of a
lithium grease.
Eurol Marine Grease has good anti-corrosion properties
protection, excellent EP properties and a
good resistance to oxidation. It is easy
pumpable in grease pumps and does not attack rubber.
It outperforms traditional calcium fats by
regarding the temperature range.
Eurol Marine Grease obviously has excellent
water-repellent properties for both fresh
water like salt water. This makes it suitable
for all lubrication points on board ships such as
also plain, roller and ball bearings.
Eurol Molybdenum Disulphide MoS2
Grease is a multi-purpose grease
composed of mineral
base oils, lithium soap and
molybdenum disulfide. This last
addition chemically binds to
the metal surfaces through which
friction (boundary lubrication!) to a
minimum is limited. Eurol
Molybdenum Disulphide MoS2 Grease
offers good resistance to oxidation
and corrosion and is water resistant.
In addition, it has a good
mechanical stability which makes the
the life of the grease is very long.
Eurol Molybdenum Disulphide MoS2
Grease is recommended for the
lubrication of heavily loaded plain bearings
EurolÓ Thread Cutting Oil is a highly compounded
oil for difficult to process high-quality
steel grades. Specially for thread cutting,
thread milling, gear slotting and hobbing.
Universal lithium grease with EP additives
- Strong adhesion to metal
- Excellent water displacement
- Very good stability
- Good anti-corrosion and anti-wear effect
- Very good pumpability
- Excellent 'Extreme Pressure' properties
MP Lithep Grease EP 2 is a multi-purpose grease
based on well-refined high viscosity
base oils with a lithium soap as
thickener.
Application:
MP Lithep Grease EP 2 can be used for
the lubrication of vehicle bearings and
construction machines, which are subjected to heavy and impact
serve tax purposes. MP Lithep Grease EP 2 is
also suitable for heavily loaded pivot points
in a wet and dusty environment.
Eurol Molybdenum Disulfide is a multifunctional
lubricating grease of 500 grams, perfect for various
mechanical applications. This high-quality grease is
excellent for the lubrication of
plain bearings.
With its excellent water resistance, this
lubricating grease reliable protection against corrosion,
oxidation and wear. The unique composition
ensures that Eurol Molybdenum Disulfide is a
has unprecedented mechanical stability, which
treated parts fully loaded.
Choose Eurol Molybdenum Disulfide for a
optimal lubrication and long-lasting protection of your
machines and equipment.
EurolÓ Lead-free Copper Grease is specially formulated
made from modified clay (infusible bentone)
and selected, high-quality solid raw materials,
such as copper, graphite and aluminum,
as well as corrosion and oxidation inhibitors.
EurolÓ Lead-free Copper Grease is of the type
Anti-Seize Assembly Compound.
It provides durable protection against corrosion
and against harmful chemical influences
from outside, and is not rinsed off by water.
EurolÓ Lead-free Copper Grease is recommended
for the lubrication of taps and threaded ends,
manifolds, battery clamps, wheel nuts,
ovens and brake pad backs
to prevent twisting and friction.
Gaskets and threaded connections loosen easily,
even after exposure to high temperatures,
corrosive media or high loads.
EurolÓ Lead-free Copper Grease ensures
that irregularities of the surface
to be filled.
The surfaces make, for example,
tightening nuts no metal
on metal contact.
Lubricated parts are closed off
of the atmosphere.
