With this 8-notch bracket tool you can combine
with the headset wrench (IceToolz number 06F2)
the 8-lug ISIS driveÓ bottom bracket cup from the frame
be turned without moving the frame
damage. The 8-notch bracket tool is made
made of Cr-Mo steel and is therefore guaranteed
long lifespan. The IceToolz article number
of the bottom bracket tool is 11D3.
Suitable for Tube Gates.
This IceToolz crank adapter is a Cr-Mo
adapter for loosening or tightening
a ShimanoÓ Hollowtech2 bearing cup. The
chrome vanadium quality of this
crank adapter guarantees a long life.
The ShimanoÓ crank adapter can be used on both sides
be used and with an 8mm Allen key
(IceToolz 35V8) can be used for force. The
reverse side of crank adapter can be used
be used to cover the ShimanoÓ
to loosen the crank. The IceToolz
The article number of this cone wrench is 11F3.
This crank adapter from IceToolz is indispensable if
a ShimanoÓ crank is mounted or
must be disassembled. The cover nut can
be loosened with the small 8-lug side
of the crank adapter and the ShimanoÓ
Hollowtech2 bearing cups can be mounted or
be disassembled with the other side of
the crank adapter, the 16-cam take-off. For the
cover nut are the ridges on the side of the
crank adapter often sufficient to provide enough power
to be able to place, but for the bearing cup
Assembly requires an 8mm Allen key
(IceToolz 35V8).
If the bearing cups are tightened with a torque wrench
(IceToolz E211) must be secured is the
IceToolz adapter D8D4 a solution. This adapter
can be clicked onto the «Ä torque wrench and
the reverse side fits this crank adapter.
Cyclus Tools Snap-in Locknut Remover Shimano.
Compatible with Shimano Steps 6000 motors.
For mounting and dismounting of lock nuts.
Suitable for Shimano Steps 6000 E-bikes.
Guide fixes the tool to the motor shaft.
Pull-push mechanism engages the lock nut.
Reinforced and extra thick teeth.
Suitable for high torques.
Prevents slipping when loosening and tightening.
For use with Snap-in holder art. 77202750.
Also suitable for 32 mm combination wrench.
Follow the manufacturer's recommended torque.
Use 3/8" torque wrench art. 7720115.
Not suitable for power tools.
Cyclus Press-Fit press ring for Shimano and FSA.
Designed for use with quick release 7720939.
For professional, safe and fast pressing.
A suitable press shaft is required for use.
CYCLE snap.in press shaft SN.90-P.
Item no. 77202790.
CYCLUS Press-Fit generation 2 press spindle.
Item no. 7720318.
CYCLUS Press-Fit generation 1 press spindle.
Item no. 7720312.
Suitable for bottom brackets with axle î 24 mm.
Cyclus Snap.in lock nut wrench for Shimano EP8.
Suitable for Steps 6100 and 8000 motors.
The key installs and removes lock nuts.
The guide is placed in the motor shaft.
A pull-push mechanism grips the lock nut.
This ensures that the torque is transferred safely.
The key does not slip under high torque.
To be used with Snap-in holder 77202750.
Also suitable for a 32 mm combination wrench.
Follow the manufacturer's recommended torque.
Use a 3/8" torque wrench 7720115.
Caution: Do not use with power tools.
Shimano TL-FC38 wrench
for assembly and disassembly
of the chainring lockring
suitable for STEPS
E6000, E6001, E6010, E6050
for using this tool
you need TL-FC32 or TL-FC36
or the TL-FC33 in combination with TL-MH10
Shimano's Deore XT RT-RT800 compact and
lightweight brake discs dissipate heat quickly
thanks to the ICE Technologies Freeza-
heat regulation system.
Shimano's center lock design allows you to
Install brake discs quickly and easily
to delete.
Advanced heat synchronization design ensures that
the braking force does not decrease.
Suitable for e.g. E-Bike
