With this 8-notch bracket tool you can combine
with the headset wrench (IceToolz number 06F2)
the 8-lug ISIS driveÓ bottom bracket cup from the frame
be turned without moving the frame
damage. The 8-notch bracket tool is made
made of Cr-Mo steel and is therefore guaranteed
long lifespan. The IceToolz article number
of the bottom bracket tool is 11D3.
Suitable for Tube Gates.
This IceToolz bracket wrench is suitable for the
ISIS DriveÓ and the ShimanoÓ bottom brackets with a
20-spline (20-lug) connection. The IceToolz
bracket key is equipped with a 32mm hexagon
where the 32mm headset wrench (06H8) fits.
IceToolz article number 11B3.
This IceToolz bracket wrench is equipped with
a 32mm key fit that allows the
bracket cup can be loosened.
This IceToolz crank adapter is a Cr-Mo
adapter for loosening or tightening
a ShimanoÓ Hollowtech2 bearing cup. The
chrome vanadium quality of this
crank adapter guarantees a long life.
The ShimanoÓ crank adapter can be used on both sides
be used and with an 8mm Allen key
(IceToolz 35V8) can be used for force. The
reverse side of crank adapter can be used
be used to cover the ShimanoÓ
to loosen the crank. The IceToolz
The article number of this cone wrench is 11F3.
This crank adapter from IceToolz is indispensable if
a ShimanoÓ crank is mounted or
must be disassembled. The cover nut can
be loosened with the small 8-lug side
of the crank adapter and the ShimanoÓ
Hollowtech2 bearing cups can be mounted or
be disassembled with the other side of
the crank adapter, the 16-cam take-off. For the
cover nut are the ridges on the side of the
crank adapter often sufficient to provide enough power
to be able to place, but for the bearing cup
Assembly requires an 8mm Allen key
(IceToolz 35V8).
If the bearing cups are tightened with a torque wrench
(IceToolz E211) must be secured is the
IceToolz adapter D8D4 a solution. This adapter
can be clicked onto the «Ä torque wrench and
the reverse side fits this crank adapter.
on map
This IceToolz Allen key has a
ergonomic handle and can be used on both sides
use. One side of the Allen key
2.5mm is a ball head or a spherical head. The
other side, the short one is a straight hexagon.
These Allen keys are comfortable to hold due to
the ergonomic handle. The ball head
ensures that even the difficult to reach
Allen screws are accessible. The IceToolz
article number of this Twinhead Allen key
is 7M25.
This handy Allen key is also available as
complete Allen key set (IceToolz
article number 7M85). The set then contains the 2, 3,
4, 5, 6 and 8mm Allen key Twinhead plus the
Twinhead T25 Torx wrench. The ball head end
This Allen key also makes it difficult to
reach Allen bolts easy to loosen
are. As a set, the Allen keys are in a nice
holder that can be used both standing and hanging
can be.
