This EDGE miscellaneous is designed for reliability and ease of use. Edge sprocket remover for cassettes/freewheels. Edge other. Edge sprocket remover for cassette/freewheel Edge chain whip cassette remover multispeed. This Edge chain whip or cassette remover is suitable for all gears. The Cr-Mo steel construction guarantees good professional quality.
This EDGE miscellaneous is designed for reliability and ease of use. Edge freewheel remover for Shimano MF/Campagnola. Edge other. Freewheel remover Edge for Shimano MF / Campagnola A Shimano MF (Multiple Freewheel) or Campagnolo freewheel remover is a tool used to remove the freewheel or cassette from a bicycle. The freewheel is the rear gear mechanism on a bicycle that allows the pedals to turn while the rear wheel is stationary. A Shimano MF freewheel remover is specifically designed to remove Shimano MF freewheels. Suitable for: Shimano MF All Campagnola cassettes Campagnola Record, Chorus and Athena bottom brackets Suitable for a 1/2 inch socket or 21mm spanner Using a freewheel remover is essential for maintaining and replacing the freewheel or cassette on a bicycle. It ensures that the freewheel is held securely during removal or installation, which prevents the freewheel from being damaged and allows the correct force to be applied to properly tighten or loosen it. It is important to ensure that you use the correct freewheel remover that is compatible with the specific make and model of freewheel on your bicycle.
This EDGE miscellaneous is designed for reliability and ease of use. Cassette remover Edge with pin - fits Shimano HG. Edge other. Cassette remover Edge with pin - fits Shimano HG Edge cassette lockring remover with pin. Also suitable for installing and removing Shimano Center Lock rotors. Use with a 24mm wrench/pliers or a 1/2" socket.
This EDGE miscellaneous is designed for reliability and ease of use. 16-lug bottom bracket wrench Edge fits Shimano Hollowtech 2 / Campagnolo. Edge other. 16-notch bottom bracket wrench Edge fits Shimano Hollowtech 2 / Campagnolo Bottom bracket wrench Edge 16-notch Length: 289mm 16 notches x 44mm Fits: Shimano Hollowtech 2 / Campagnola Can also be used to loosen the lockring on centerlock disc brakes
This IceToolz crank arm removal combination tool
is an all-in-one tool for disassembling
the crank arm. The combi tool is equipped with a
8mm Allen key, a 14mm-15mm socket wrench,
a crank puller plus socket (04D2) for the hollow
axle and a handy handle, long enough to
to apply sufficient force. With this IceToolz
crank remover has been used from both Cr-
Mo steel as Cr-V steel. The handle of the
The customer is provided with an ergonomic
plastic grip. The IceToolz article number of
this crank remover is 04S1.
This complete tool for disassembling
A crank is a well thought out tool. In some
On bicycles the crank is secured with an Allen bolt.
Others have the 14mm (or 15mm) nut
hidden behind a decorative cap. For all cases
is the right tool available with this
IceToolz customer. The crank puller itself is
provided with an extra cap (the orange cap) for
if a hollow axle has been used.
With reversible insert pin
to be used for the following brake systems:
Shimano (no original spare part)
Magura (no original spare part)
Hayes (no original spare part)
Tektro (no original spare part)
Icetoolz Multitool Mighty 19-piece\nMaterial: steel, plastic\nDimensions: 8 x 3.5 x 2.5 cm (L x W x D)\n•: 1.5x2x2.5x3x4x5x6x8mm Allen keys\n•: Phillips and socket screwdriver\n•: T-25 star wrench\n•: 8x9x10x15mm wrenches\n•: 14~15G spoke nipple spanners\n•: Removable tire levers\nWeight: 144 grams
This IceToolz cone wrench set is a
professional set of cone wrenches that fit in no
A single workshop may be missing. The IceToolz
cone keys are made from the sturdy
chrome-molybdenum steel (Cr-Mo) which says something
about the quality of these cone keys. The
cone keys are finished with a pleasant
rubber handle. And the length of 20cm is
long enough to provide sufficient power
set. The IceToolz article number of this
cone key set is 47X3.
This IceToolz cone wrench set is made
Made of Cr-Mo steel, so nice and sturdy.
with a comfortable grip. The cone keys
are a solution for repairs where the cups
and lock nut must be loosened and the
Regular handle wrenches are too thick. The IceToolz
Cone keys then offer a solution. This set
cone wrenches are the most common sizes
Many jobs require 2 cone wrenches to
for example loosen the lock nut of the cone
turning. But it is not necessary to have a double
to buy a set of cone wrenches, often have
the cone and the lock nut are a different size. And
complete set of cone keys is sufficient per
workplace.
Key size
13 mm
14 mm
15 mm
16 mm
17 mm
18 mm
19 mm
This IceToolz cone wrench set is a
professional set of cone wrenches that fit in no
A single workshop may be missing. The IceToolz
cone keys are made from the sturdy
chrome-molybdenum steel (Cr-Mo) which says something
about the quality of these cone keys. The
cone keys are finished with a pleasant
rubber handle. And the length of 20cm is
long enough to provide sufficient power
set. The IceToolz article number of this
cone key set is 47X3.
This IceToolz cone wrench set is made
Made of Cr-Mo steel, so nice and sturdy.
with a comfortable grip. The cone keys
are a solution for repairs where the cups
and lock nut must be loosened and the
Regular handle wrenches are too thick. The IceToolz
Cone keys then offer a solution. This set
cone wrenches are the most common sizes
Many jobs require 2 cone wrenches to
for example loosen the lock nut of the cone
turning. But it is not necessary to have a double
to buy a set of cone wrenches, often have
the cone and the lock nut are a different size. And
complete set of cone keys is sufficient per
workplace.
Key size
13 mm
15 mm
17 mm
This IceToolz cone wrench is a professional
cone wrench that should not be used in any workshop
missing. The IceToolz cone wrenches are
made of strong chrome-molybdenum
steel (Cr-Mo) which says something about the quality of
this cone wrench. The cone wrench is finished
with a comfortable rubber handle. And the length
23cm is long enough to provide sufficient
to be able to exert force. The IceToolz
The article number of this cone wrench is 4713.
This IceToolz cone wrench is made of
Cr-Mo steel, so nice and sturdy. Equipped with
a comfortable handle. The cone keys are
a solution for repairs where the cups and
lock nut must be loosened and the
Regular handle wrenches are too thick. The IceToolz
Cone keys then offer a solution.
Many jobs require 2 cone wrenches to
for example loosen the lock nut of the cone
turning. But it is not necessary to have a double
to buy a set of cone wrenches, often have
the cone and the lock nut are a different size. And
complete set of cone keys is sufficient per
workplace.
The IceToolz cone wrenches are available in sizes: 13,
14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 and
25mm
This IceToolz bracket wrench is suitable for the
ISIS DriveÓ and the ShimanoÓ bottom brackets with a
20-spline (20-lug) connection. The IceToolz
bracket key is equipped with a 32mm hexagon
where the 32mm headset wrench (06H8) fits.
IceToolz article number 11B3.
This IceToolz bracket wrench is equipped with
a 32mm key fit that allows the
bracket cup can be loosened.
IceToolz Chain Cleaner with 20 brushes for
4-sided intensive cleaning. Includes 1 spare
sponge. Equipped with rubber bracket for
attachment to the rear fork so that
cleaning easier and more efficient
is being used. Patent pending.
Elvedes grease gun. 80ml, including grease type labels. For use with roller brake grease (2791) or lithium grease (art. 5166). Grease gun needle also available separately (5243). Grease not included.
