Lock nut remover for Bosch E-bike BCD 4 motor
Index Z8 36.8
For mounting and dismounting lock nuts
Teeth of cap reinforced and thicker than normal
Suitable for high torque values
To be used with Snap-In holder art 7202750
Or with a 32 mm combination wrench
Or with 3/8" square head
Please note the torque recommended by the manufacturer
Cutting and face milling cutter for bottom bracket.
Post-cutting and face milling in a single operation.
Two applications in one tool.
Provides coaxial threads.
Cut wire serves as a guide.
Only one tool needed.
Save time and money with this tool.
Designed for professional use.
After cutting, the cutting part is disconnected.
Bracket can be flattened on both sides.
No repositioning required, 100% coaxial.
Shimano Hollowtech 2 and external bearings required.
Regular cleaning extends the lifespan.
Letters on tools refer to the tool.
ÃRÄ = right-turning, clockwise.
ÃLÄ = left-turning, counter-clockwise.
Does not refer to side of bike.
Cyclus bottom bracket pin "PRO" T47 standard, pair.
Spare pair of dies for T47 standard.
For bottom bracket, high-quality cutting irons 8 flats.
Suitable for articles 7720140 and 7720175.
Cyclus headset cutter for milling tools 7720211.
To be used with cone guide î55 mm 7720942.
For head tubes 52.0 mm inner diameter.
Milling depth 7.4 mm for integrated headset.
Bearing shell seat has an angle of 45ø.
Makes flat and coaxial shell seats.
Individual milling according to the SHIS system.
Types: EC, ZS and IS with corresponding diameters.
Diameter: 52.0 mm / 1 1/2".
Includes one individual cutter.
Order complete tool holder.
Always turn clockwise.
Use suitable cutting oil when milling.
Cyclus headset cutter for milling tools 7720211.
To be used with cone guide î55 mm 7720942.
For head tubes 47.0 mm inner diameter.
Milling depth 7.4 mm for integrated headset.
Bearing shell seat has an angle of 45ø.
Makes flat and coaxial shell seats.
Individual milling according to the SHIS system.
Types: EC, ZS and IS with corresponding diameters.
Diameter: 47.0 mm / 1 1/4".
Includes one individual cutter.
Order complete tool holder.
Always turn clockwise.
Use suitable cutting oil when milling.
Bottom bracket cutting and face milling tools
For re-cutting and face milling in one operation
Two applications in the same tool
Provides coaxially cut threads
Screw thread serves as a guide for face milling
Just one tool saves time and money
Professional use for bottom bracket
Cutting section can be detached
Bracket can be made flat on both sides
No need to reinstall tools
100% coaxial operation guaranteed
For Shimano Hollowtech 2 and other bottom brackets
Flattening is required for bearings on the outside
Regular cleaning for longer life
Please note: letters refer to the tool
R = right thread, L = left thread
Letters do not refer to the side of the bike
