Cyclus Snap.in guide pin
Compatible with FSA MegaEvo
RaceFace BB30
DUB
Guide prevents slipping and tilting
Protects components during use
Can be used for other Snap.in tools
Saves space and costs in the workplace
Holder art. 77202750 required
Matching Snap.in insert required
Please note the torque recommended by the manufacturer
Cyclus Snap.In bearing extractor
Removes press bearings and bearing cups
Suitable for inner diameter 22 to 30 mm
Maximum outer diameter of bearing cup 45 mm
Not suitable for BB386 Press Fit cups
Place the puller claws correctly behind the bearing
Use adapter ring according to bearing size
Snap.In holder 77202750 is required
Cyclus Snap.In axle guide
Compatible with SRAM GXP
Prevents slippage and damage during use
Guide can also be used for other Snap.In tools
Holder art. 77202750 required for use
Matching Snap.In insert required (e.g. 77202706)
Adhere to manufacturer's torque when mounting
Cyclus Snap.In axle guide
Compatible with Campagnolo Ultra Torque
Compatible with Campagnolo Power Torque
Prevents slippage and damage during use
Guide can also be used for other Snap.In tools
Holder art. 77202750 required for use
Matching Snap.In insert required (e.g. 77202706)
Adhere to manufacturer's torque when mounting
Cyclus Snap.In guide bolt for bottom bracket M15x1
Ensures stable conduction and high force
Prevents the tool from slipping
Compatible with any M15x1 thread
Suitable for Shimano Octalink
Suitable for Shimano BB-7700
Suitable for ISIS Drive
Suitable for Truvativ BB Gigapipe
Suitable for Bosch Active Line motor
Suitable for Bosch Performance Line motor
Indispensable for professional installation
Prevents slippage and damage
Also usable with Snap.In tools
Saves space and costs in the workshop
Holder 77202750 and Snap.In insert required
Adhere to the manufacturer's tightening torque
Cyclus Snap.In guide bolt for bottom bracket M12x1
Ensures stable conduction and high force
Prevents the tool from slipping
Compatible with any M12x1 thread
Suitable for ISIS Drive
Suitable for Panasonic motor with torque sensor
Suitable for Bosch Classic and Classic+ Line
Indispensable for professional installation
Prevents slippage and damage to parts
Also usable with Snap.In tools
Saves space and costs in the workshop
Holder 77202750 and Snap.In insert required
Adhere to the manufacturer's tightening torque
Cyclus Snap.in tool case 2.0
For mounting bottom bracket bearings and cassettes
Includes tool holder and inserts
With clamp plate for wall or nail wall mounting
Suitable for all common axle systems
Supports SHIMANO, Octalink, Hollowtech II
Also TRUVATIV, FSA, ISIS, CAMPAGNOLO, ROHLOFF
Including torque wrench adapter
Can be expanded with cutting tools
Supports press-fit and e-bike tools
All Snap-in tools at hand
Handy and space-saving suitcase
Parts also available separately
Snap-in cycle locknut remover for Bosch3 Active.
For engines E-bike Bosch 2017.
Used for loosening and tightening lock nuts.
Integrated guide on motor shaft for safe torque.
Pull-push mechanism connects tool to lock nut.
Teeth are thicker and reinforced for high torque.
Works without slipping.
Can be used with snap-in holder 77202750.
Or with a 32 mm combination wrench.
Tighten locknut to factory torque.
Check torque with 3/8" torque wrench 7720115.
Do not use with power tools.
Cyclus Snap.In remover for Bosch 1 spider.
Compatible with Bosch Classic and Classic+ Line.
Thread guide SN-71-F, code 77202771.
Index Z8 55.0.
Removes and installs lock nuts from engines.
Necessary for engine repairs or chainring changes.
Use with tool holder 77202750.
Additional parts such as adapter or guide possible.
Recommended: Snap.In Thread Guide SN-71-F.
Professional mounting without slipping or tilting.
Guide can also be used with other Snap.In tools.
Please take factory torque into account when mounting.
Cyclus Snap.in workshop storage case 2.0
Well-known Snap.in tool case in a new version
Larger and mobile suitcase
More possibilities with the content
Number of inserts adapted to current standards
More space for additional tools
A solution at hand for almost every problem
High-quality hard case with combination lock
Suitable for Cyclus Tools Snap.in system
Snap.in clipboard not included
For example for Shimano Hollowtech 2, Miche Evo Max
Cyclus case with bearing extractor set.
Set consists of slide hammer 700 g, extra weight
1400 g, 12x adapters 6~30 mm and connecting element.
With the bearing disassembly tool from Cyclus ToolsÓ
the bearings can have different internal diameters
effortlessly without additional support from frame or
hub shell must be removed.
It is easy and fast and protects, for example,
vulnerable carbon frames.
2 different sizes of slide hammer allow for both
the small and the larger bearings with the right force
be removed.
Always make sure that the hammer is in line with
the bearing is held and beaten!
Clean the bearing housing beforehand and put some
silicone oil, then also stubborn
loosen stuck bearings.
Cycle press-in spindle with press rings (5 sets)
Included press rings: Campagnolo Ultra/Power Torque
SRAM, Truvativ, GXP
Shimano BB and FSA
FSA BB30 and SRAM DUB
Press only on outer bearing ring
Prevent damage to ball bearings and seals
