Cyclus bottom bracket shell face milling cutter.
Milling tool for 44 mm diameter.
Includes cutter #7720027.
Cleaning the bottom bracket shell surfaces.
Ensures that surfaces are perfectly parallel.
Correct mounting of bottom bracket possible.
This allows bearings to be properly aligned.
Max. cutter diameter: 9 mm.
Max. bottom bracket shell diameter: 44 mm.
Use correct guide bush for BSA/ITAL/FR.
Even pressure via spring and threaded bush.
Use suitable cutting oil for material.
Cyclus headset milling kit for EC34 headset
Suitable for 34/15/90ø
Including cone guide
Guaranteed straight milling without cant
Maximum head tube length 190 mm
Maximum milling depth 15 mm
Maximum pipe wall thickness 4 mm
Turn the cutter evenly clockwise
Even when disassembling the cutter
Always use suitable cutting oil
Cyclus headset milling set for EC30 headset
Suitable for 30 15 90 degrees
Including cone guide
Guaranteed straight milling
No superelevation during milling
Maximum head tube length 190 mm
Maximum milling depth 15 mm
Maximum wall thickness of the tube 4 mm
Turn the cutter evenly clockwise
Even when disassembling the cutter
Always use suitable cutting oil
Select cutting oil suitable for the material
Cyclus headset press kit for 1" and 1 1/8" semi-integrated
Presses upper and lower headset cups simultaneously
Clean surfaces before pressing the cups
Check accuracy of cup seats in tube
If necessary, edit the head tube with a headset reamer
Art. 7720005 / 7720006 / 7720046
Using CYCLUS TOOLS cutting oil increases efficiency
Improves tool life
Reduces friction during machining
Cools tools and workpiece
Prevents corrosion
Removes chips from the machining area
Suitable for milling, drilling and cutting
Lower friction reduces cutting force
Less wear on CYCLUS TOOLS tools
Lhuile de coupe CYCLUS TOOLS am‚liore lefficacit‚
The extruder is designed to remove the top
and lower headset cup simultaneously in the
to press the head tube off the frame.
Headset cups for pressing in the
outer headset cup with ball guide max.
headset length: 200 mm the tool is
for the lower and upper cup
press evenly into the head tube.
Before use it is strongly recommended to
check if the cup fit is not
damaged. If this is the case, please adjust
then measure the size with the headset cutter. tip:
put some grease on the head tube to be pressed in
and the bearing shell and it's not just
easier, but is also better for the
tools.
- Tool holder with T-handle
- Trapezoidal threaded spindle 360 mm
- Thrust bearing for headset cup
- Screw socket
- Thrust bearing
CYCLUS chain link counter
Counts chain links in seconds
When a worn chain is replaced with a
new, the number of links must be determined.
Because a worn bicycle chain extends and
the usual juxtaposition of the new and
old chain leads to an inaccurate result
and thus a different number of chain links.
And this is how it works:
1. Place the chain link counter on the chain,
reset the counter to zero
2. Mark any chain link
with a visible point
3. From the marking 1x through the chain link-
keep the counter running
4. Read the number of chain links
5. Use the chain link counter to count the links of the
count down new chain on the reel and on the
remove correct length (compared to the
worn chain the new chain is shorter)
For BMX up to 12-speed width
Color: Black/Blue
Cyclus Tools freewheel removal wrenches.
For easy removal of cassette and freewheel.
Insert the key onto the cassette from above or below.
No chain needed, key won't slip.
Enables greater power transmission.
Removes cassette quickly and easily.
Cyclus Snap.in guide pin
Compatible with FSA MegaEvo
RaceFace BB30
DUB
Guide prevents slipping and tilting
Protects components during use
Can be used for other Snap.in tools
Saves space and costs in the workplace
Holder art. 77202750 required
Matching Snap.in insert required
Please note the torque recommended by the manufacturer
Cyclus Snap.In bearing extractor
Removes press bearings and bearing cups
Suitable for inner diameter 22 to 30 mm
Maximum outer diameter of bearing cup 45 mm
Not suitable for BB386 Press Fit cups
Place the puller claws correctly behind the bearing
Use adapter ring according to bearing size
Snap.In holder 77202750 is required
Cyclus Snap.In axle guide
Compatible with SRAM GXP
Prevents slippage and damage during use
Guide can also be used for other Snap.In tools
Holder art. 77202750 required for use
Matching Snap.In insert required (e.g. 77202706)
Adhere to manufacturer's torque when mounting
Cyclus Snap.In axle guide
Compatible with Campagnolo Ultra Torque
Compatible with Campagnolo Power Torque
Prevents slippage and damage during use
Guide can also be used for other Snap.In tools
Holder art. 77202750 required for use
Matching Snap.In insert required (e.g. 77202706)
Adhere to manufacturer's torque when mounting
Cyclus Snap.In guide bolt for bottom bracket M15x1
Ensures stable conduction and high force
Prevents the tool from slipping
Compatible with any M15x1 thread
Suitable for Shimano Octalink
Suitable for Shimano BB-7700
Suitable for ISIS Drive
Suitable for Truvativ BB Gigapipe
Suitable for Bosch Active Line motor
Suitable for Bosch Performance Line motor
Indispensable for professional installation
Prevents slippage and damage
Also usable with Snap.In tools
Saves space and costs in the workshop
Holder 77202750 and Snap.In insert required
Adhere to the manufacturer's tightening torque
