Cyclus Snap.in guide pin
Compatible with FSA MegaEvo
RaceFace BB30
DUB
Guide prevents slipping and tilting
Protects components during use
Can be used for other Snap.in tools
Saves space and costs in the workplace
Holder art. 77202750 required
Matching Snap.in insert required
Please note the torque recommended by the manufacturer
Cyclus Snap.In bearing extractor
Removes press bearings and bearing cups
Suitable for inner diameter 22 to 30 mm
Maximum outer diameter of bearing cup 45 mm
Not suitable for BB386 Press Fit cups
Place the puller claws correctly behind the bearing
Use adapter ring according to bearing size
Snap.In holder 77202750 is required
Cyclus Snap.in locknut remover Yamaha Giant
Compatible with PW-X series (Yamaha)
SyncDrive Pro Series (Giant)
For mounting and dismounting E-bike lock nuts
Integrated guide in the motor shaft
Pull-push mechanism connects to the lock nut
High power transmission without slipping
To be used with Snap-in holder art. 77202750
Or 32mm combination wrench
Please note the torque recommended by the manufacturer
Use 3/8" torque wrench art. 7720115 for checking
Not suitable for power tools
Cyclus Snap.In axle guide
Compatible with Campagnolo Ultra Torque
Compatible with Campagnolo Power Torque
Prevents slippage and damage during use
Guide can also be used for other Snap.In tools
Holder art. 77202750 required for use
Matching Snap.In insert required (e.g. 77202706)
Adhere to manufacturer's torque when mounting
Cyclus Snap.In axle guide
Compatible with SRAM GXP
Prevents slippage and damage during use
Guide can also be used for other Snap.In tools
Holder art. 77202750 required for use
Matching Snap.In insert required (e.g. 77202706)
Adhere to manufacturer's torque when mounting
Cyclus Snap.In guide bolt for bottom bracket M15x1
Ensures stable conduction and high force
Prevents the tool from slipping
Compatible with any M15x1 thread
Suitable for Shimano Octalink
Suitable for Shimano BB-7700
Suitable for ISIS Drive
Suitable for Truvativ BB Gigapipe
Suitable for Bosch Active Line motor
Suitable for Bosch Performance Line motor
Indispensable for professional installation
Prevents slippage and damage
Also usable with Snap.In tools
Saves space and costs in the workshop
Holder 77202750 and Snap.In insert required
Adhere to the manufacturer's tightening torque
Cyclus Snap.In guide bolt for bottom bracket M12x1
Ensures stable conduction and high force
Prevents the tool from slipping
Compatible with any M12x1 thread
Suitable for ISIS Drive
Suitable for Panasonic motor with torque sensor
Suitable for Bosch Classic and Classic+ Line
Indispensable for professional installation
Prevents slippage and damage to parts
Also usable with Snap.In tools
Saves space and costs in the workshop
Holder 77202750 and Snap.In insert required
Adhere to the manufacturer's tightening torque
Cyclus Tools Snap-in Locknut Remover Shimano.
Compatible with Shimano Steps 6000 motors.
For mounting and dismounting of lock nuts.
Suitable for Shimano Steps 6000 E-bikes.
Guide fixes the tool to the motor shaft.
Pull-push mechanism engages the lock nut.
Reinforced and extra thick teeth.
Suitable for high torques.
Prevents slipping when loosening and tightening.
For use with Snap-in holder art. 77202750.
Also suitable for 32 mm combination wrench.
Follow the manufacturer's recommended torque.
Use 3/8" torque wrench art. 7720115.
Not suitable for power tools.
With this remover and repair kit you can remove cranks.
Suitable for cranks with internal thread M22x1.
Also suitable for internal thread M24x1.
For conventional tapered bottom brackets.
Also for bottom brackets with a longer stroke.
Widely used on modern E-bikes.
Crank puller with extra long axle.
Fits high Q size cranks.
Solution for damaged pedal wire.
No need to replace the crank.
A sustainable and profitable investment.
Set contents
Crank remover M22x1 / M15x1.
Crank remover M24x1 / M15x1.
Crank remover M24x1.
Thread tap M22x1.
Tap special size M24x1.
Milling core M24.
Wire guides M15x1, M12x1, M10x1, M8x1.
Cyclus Snap.in workshop storage case 2.0
Well-known Snap.in tool case in a new version
Larger and mobile suitcase
More possibilities with the content
Number of inserts adapted to current standards
More space for additional tools
A solution at hand for almost every problem
High-quality hard case with combination lock
Suitable for Cyclus Tools Snap.in system
Snap.in clipboard not included
For example for Shimano Hollowtech 2, Miche Evo Max
Cyclus case with bearing extractor set.
Set consists of slide hammer 700 g, extra weight
1400 g, 12x adapters 6~30 mm and connecting element.
With the bearing disassembly tool from Cyclus ToolsÓ
the bearings can have different internal diameters
effortlessly without additional support from frame or
hub shell must be removed.
It is easy and fast and protects, for example,
vulnerable carbon frames.
2 different sizes of slide hammer allow for both
the small and the larger bearings with the right force
be removed.
Always make sure that the hammer is in line with
the bearing is held and beaten!
Clean the bearing housing beforehand and put some
silicone oil, then also stubborn
loosen stuck bearings.
