Cyclus headset cutter for holder #7720211.
To be used with cone guide î48/55 mm (#7720942/3).
Holder for headset reamer without cutter and cone guide.
All Cyclus headset reamer heads fit this basic tool.
Preparing and cleaning headsets for mounting.
Maximum head tube length: 190 mm.
Including holder without cutter and cone guide.
For complete tool, milling cutter and taper guide are required.
Example cutter: art. 7720926, cone guide: art. 7720943.
Bottom Bracket Threading Tool Profi
For re-cutting bracket wire
Includes high-quality cutting irons #7720142
6 cutting edges and ground guide
Creates optimal concentricity of screw threads
For BSA 1,370" x 24 tpi
Inserting both sides at the same time prevents misalignment
Always use suitable cutting oil
Letters and markings refer to tools
R = turn right, L = turn left
Cyclus headstock cutter for milling tools 7720211
To be used with cone guide î48 mm 7720943
For head tubes with an inner diameter of 44 mm
Milling depth 6.5 mm for integrated headset
Bearing seat angle 36 degrees
Creates flat and coaxial shell seats
SHIS naming according to new standard
EC external cup
ZS Zero Stack
IS integrated standard
Diameter 41.7 mm
Milling depth 6.5 mm
Milling angle 36 degrees
Includes an individual cutter
Holder 7720211 and cone guide required
Turn clockwise only
Always use suitable cutting oil
Cyclus headset milling cutter #7720211
To be used with cone guide î48mm #7720943
Inner diameter 42 mm
Milling depth 6.0 mm
Angle of bearing shell seats 45ø
Creates flat and coaxial shell seats
Nomenclature according to SHIS system
EC = External Cup, ZS = Zero Stack, IS = Integrated
Includes an individual cutter
Holder art. 720211 and cone guide art. 720943 required
Always turn clockwise
Use suitable cutting oil when milling
Cyclus headset milling cutter #7720211
To be used with cone guide î48mm #7720943
Inner diameter 42 mm
Milling depth 2.4 mm
Angle of bearing shell seats 45ø
Creates flat and coaxial shell seats
Nomenclature according to SHIS system
EC = External Cup, ZS = Zero Stack, IS = Integrated
Includes an individual cutter
Holder art. 7720211 and cone guide art. 7720943 required
Always turn clockwise
Use suitable cutting oil when milling
Cyclus headset milling cutter #7720211
To be used with cone guide î48mm #7720943
Inner diameter 42 mm
Milling depth 6.9 mm
Angle of bearing shell seats 45ø
Creates flat and coaxial shell seats
Nomenclature according to SHIS system
EC = External Cup, ZS = Zero Stack, IS = Integrated
Includes an individual cutter
Holder art. 7720211 and cone guide art. 7720943 required
Always turn clockwise
Use suitable cutting oil when milling
Cyclus headset milling cutter #7720211
To be used with cone guide î48mm #7720943
Inner diameter 42 mm
Milling depth 3.0 mm
Angle of bearing shell seats 45ø
Creates flat and coaxial shell seats
Nomenclature according to SHIS system
EC = External Cup, ZS = Zero Stack, IS = Integrated
Includes an individual cutter
Holder art. 7720211 and cone guide art. 7720943 required
Always turn clockwise
Use suitable cutting oil when milling
For shortening and thread rolling of spokes in 1
action. For all spokes with fine thread
(FG2 / FG 2.3 / FG2.6)
Including spoke holder curved spoke
- infinitely adjustable wire diameter
- therefore only 1 pair of wire stamps
- shortening and thread rolling in 1 action
- for curved and straight (hammer head) spokes
- for spoke lengths from 80mm to 310mm
Cyclus cone guide î55 mm for headset milling.
Centers the tool in the head tube.
Required for milling diameters from 43 mm.
Maximum diameter: 55 mm.
Includes a single cone guide.
For complete tools: holder + cutter required.
Example cutter: art. 7720940.
