Version: Xb
Light source: 1 red LED
Power supply: battery
Batteries 2 x AA 1.5V
Battery life: >180h
Danish regulations: > 40 hours
Battery low indicator: Yes
Weight: 114g
Blister: Yes
Connection: Carrier
Adjustable to both 50mm and 80mm.
Rear fender with integrated taillight
The NIGHTBLADE MTB mudguard from
high-quality plastic offers thanks to the
front spoiler and the extra long rear spoiler not
only optimal protection against
splashing water. The integrated rear light
with StVZO approval also guarantees
safety on public roads The rear light
with integrated battery is removable and can
can be easily reconnected via a USB connection
charged.
Double protection on dark and wet areas
roads
The soft plastic spoiler also functions as
edge protection when getting on and off. The
SKS NIGHTBLADE can be easily installed using the Quick
Release mount on almost any seatpost
can be mounted and can be mounted thanks to the two
pivot points optimally on a mountain bike
can be adjusted. The lamp is also available separately.
Å Quick Release Mount
Å Made of scratch-resistant, high-quality
plastic
Å With integrated, rechargeable rear light
Å Perfect for mountain bikes
Å Made in Germany
Simson Battery Luggage Carrier Rear Light Taillight
with tunnel LED lighting for extra good visibility
and an on/off switch. Splash and
Rainwater proof. Packed per 10 pieces in a
box, the box is provided with a '1 piece
barcode' on the inside which makes the lamp
easy to scan. Batteries included: 2 x
AA.
The Simson Battery headlamp Classic chrome is
a classic model headlight in LED version.
The headlight has a black and chrome
housing and an on/off switch on the
top. Can be mounted on, among other things, the
Simson Snaphook using a
Phillips screwdriver. Pack of 10.
in a box, the box is provided with a '1 piece
barcode' on the inside which makes the lamp
easy to scan. Batteries included: 3 x
AAA.
This Simson Hub Dynamo Front Fork Headlight
Mobile is a trendy fork headlamp with white LED
and on/off button. The headlight has a
light output of 35 Lux! The headlamp is
suitable for front fork mounting and is easy
to be mounted on the crown piece of the front fork.
Then connect the lamp with the supplied
lighting cord to the hub dynamo.
E-approval IA E1 023511
These plastic trouser clips are a solution if
a bicycle with a
open chain system and you can quickly get on the bike
steps. A trouser clip around the trouser leg prevents
dirty clothes and prevents the trousers from getting in between
chain and sprocket causing dangerous
situations arise. The plastic trouser clips are
strong and long lasting. The reflection ensures
extra visibility and comes from 3M
Scotchlite, the manufacturer of reflective materials.
Specifications:
Feature: clamp pipes 7cm û 6mm
Color (base): gray
Body color: gray
Color reflection: silver
Material: Retroreflective, 360ø
Application: Striking! Left and right too
visible
Weight (kg): 0.024
Unit: 10 pcs.
Presentation (pack): blister with euro slot
Instructions for use: divide the pipes
evenly over the wheels for the best
result.
For testing Shimano e-bike batteries.
The adapter ensures that the battery is active
remains and can be tested.
Suitable for the Shimano BT-E6000,
BT-E6001 and BT-E6010 batteries.
Shimano Steps e-bike batteries are under
other for the following e-bike brands
deployed:
BMC, Cortina, Focus, Gazelle, Kalkhoff,
Merida, Scott, Sparta, Cannondale, dutch id,
HPvelotechnik, Koga, Oxford, Pegasus,
WMS, Bergamont, brinke, Drossiger, KTM,
Puch, Venturelli, Achielle, Alba, Azorbike,
bakfiets.nl, Beaufort, Flanders, Frapp‚,
Olympia, Popal.
An adapter cable AT00038 is required! This
is included in the delivery of a
Battery tester. The adapter cable can also
must be ordered separately.
Besides Bosch and Yamaha, Shimano is a
major player in the e-bike battery field.
Battery tester was already the first that Bosch
could test batteries (even a year before Bosch
itself) and also strives to be the first
are with Shimano.
Instruction:
1. Connect the adapter using the
adapter cable AT00038 to the
battery tester.
2. Slide the adapter into the battery.
3. Press the button on the battery to turn it on.
to change gear.
4. Start the battery tester and follow the
instructions.
Please note: The USB connection on the adapter is
intended for a possible firmware update
of the adapter.
DO NOT connect this! Incorrect use may cause
this causes damage!
Luggage carrier 36V:
Giant Twist Go Power models up to and including 2014
Giant Twist Lite 1 models up to 2014.
Gaint Twist Lite Power models up to and including 2014.
Gaint Twist Lite CS models up to and including 2014.
Giant Twist Mio models up to and including 2014.
Gaint Twist Mio Coaster models up to and including 2014.
Giant Twist Aspiro models up to 2014.
Luggage carrier 26V:
The following models between 2008 - 2012:
Giant Twist Comfort CS
Giant Twist Elegance CS
Giant Twist Express CS
Giant Twist Sport CS
Giant Twist Comfort CS
Giant Twist Freedom CS
Giant Twist Lite Single
Giant Twist Go Single
Giant Twist Go Double
Gaint Twist 1.1
Frame: 36V:
Giant Twist Power models 2011 to 2014.
Gaint Twist Esprit Power models 2011 and later.
Gaint Aspiro Hybrid models 2011 to 2014.
Giant Twist Go Double Power models 2011 to 2014
Various Giant Ease models
Giant uses the term for this type of battery:
EnergyPack Li-ion 400Wh, 36V side carrier.
NB!
Not suitable for Giant 36V luggage carrier battery,
Giant Aspiro, Giant Prime and Giant Ease
models from 2014 and for Giant Aspiro
models, battery Giant Prime models
0.a. E+O, E+1, E+2, E+3.
Adapter for 36V E-Motion batteries.
First generation E-motion:
Sparta E-Motion C1: Models 2011 to 2013
Sparta E-Motion C2: Models 2010 to 2013
Sparta E-Motion C3: Models 2011 to 2012
Sparta E-Motion CS2: Models 2011 to 2012
Sparta Country Tour Electric: Models 2011 to 2013
Sparta Pick-up electric: Models 2011 to 2012
Sparta Amazone 4 life: Models 2012 to 2013
Sparta E-Motion C2 model 2014 to 2015
Sparta E-Motion C3 model 2013 to 2015
Second generation E-Motion:
Sparta E-Motion C4 model 2012 to 2015
Sparta E-Motion CS4 model 2012,
Sparta E-Motion C5 model 2014 to 2015,
Sparta Elegance model 2014 to 2015,
Sparta lola Jo E model 2015,
Sparta Mojo E model 2014 to 2015,
Sparta Original E model 2015,
Sparta Pick Up E model 2014 to 2015,
Sparta Amazone E model 2014 to 2015,
Sparta Country Tour E model 2014 to 2015,
Batavus Allegro E-go model 2014 to 2015,
Batavus E-Blockbuster model 2015,
Batavus Genova E-go model 2015
Batavus Monaco E-go model 2014 to 2015,
Batavus Stratos E-go model 2014 to 2015,
Batbus Torino E-go model 2014 to 2015.
An adapter cable AT00038 is required! This
is included in the delivery of a
Battery tester. The adapter cable can also
must be ordered separately.
This 24V tube battery (banana battery), NIMH,
is present in the following e-bikes:
Batavus Legato easy, Batavus Padova easy,
Sparta Ion GL model 2008 to 2012
Sparta Ion L model 2009 to 2011
Sparta Ion M-Gear model 2005 to 2008
Sparta Ion MGT+ model 2008
Sparta Ion NXT, Ion XGT
Sparta Amphion SDS model 2008 to 2009
Sparta Ion Basic model 2008
Sparta Ion City model 2005 to 2008
Sparta Ion Classic 2008 to 2010
Sparta Ion Comfort model 2005 to 2008
Sparta Ion Extension model 2007
Sparta Ion Blackline
Gazelle bicycles with the Innergy and Innergy XT
drive system. Cable is suitable for, among other things,
following models: Gazelle Orange Innergy,
Gazelle Medeo Innergy, Gazelle Chamonix Innergy,
Gazelle Fuente Innergy, Gazelle Balance Innergy,
Gazelle Miss Grace Innergy.
Cable for 36V batteries Gazelle Innergy.
Gazelle bicycles with the Innergy and Innergy
XT drive system. Cable is suitable for
including the following models: Gazelle Orange
Innergy, Gazelle Medeo Innergy, Gazelle
Chamonix Innergy, Gazelle Fuente Innergy,
Gazelle Balance Innergy, Gazelle Miss
Grace Innergy. Instructions:
1. Connect the cable to the battery (see photo) and to
the battery tester
2. Press the button (rear light) on the battery to
to activate this.
3. Start the battery tester and follow the instructions.
NB :
Some battery types switch off prematurely
with an error (the rear light is flashing). Follow
then follow the procedure below:
1. Let the battery rest for at least 1 hour.
2. Press the button (rear light) on the battery to
to activate this.
3. Select the "Resume test" option
4. Set the current to 1A.
Cable for testing 36V Cortina,
Bikkel and Venturelli batteries. With this cable part
can e-bike batteries be tested from
Cortina Ecomo, Bikkel Bikes and Venurelli.
Bosch Activator Active & Performance
Accessory cable
Adapter for testing 36V Bosch Active &
Performance batteries. The adapter ensures that
the battery remains active and can be tested. Bosch
Active & Performance batteries (300W, 400W,
500W) are used in various e-bikes:
Sparta, Kreidler, Ghos, Koga, Batavus, Faler,
Hercules, Merida, Bergamont, Cannondale,
Centurion, Haibike, Scott, Victoria, Trek.
Models from 2014 onwards. An adapter cable
AT00038 is required! This is included with the
Delivery of a Battery Tester. The adapter cable
Can also be ordered separately. Instructions:
1. Connect the adapter using the adapter cable
AT00038 to the battery tester.
2. Slide the adapter into the battery.
3. Press the button on the battery to turn it on.
to change gear
4. Start the battery tester and follow the instructions.
Please note: The USB connection on the adapter is
intended for a possible firmware update
of the adapter. DO NOT connect it! If incorrect
Use may cause damage!
Bosch Activator Classic
Accessory cable
Adapter for testing 36V Bosch
Classic batteries of 300Wh, 400Wh and
500Wh. The adapter ensures that the battery
remains active and can be tested.The Bosch
Classic batteries are available on various e-bike brands
present: Sparta, Kreidler, Ghos, Koga,
Batavus, Falter, Hercules, Merida,
Bergamont, Cannondale, Centurion, Haibike,
Flyer, Scott, Victoria, Trek etc. Models
2010 - 2013 and Classic models 2014.
Battery placement for both models
luggage carrier as on the frame. An adapter
Cable AT00038 is required! This is included.
with the delivery of a Battery Tester. The
adapter cable can also be ordered separately
become. Instructions: 1. Connect the adapter
using the adapter cable AT00038 to the
battery tester. 2. Slide the adapter into the
battery. 3. Press the button on the battery to
to enable this. 4. Start the
Battery tester and follow the instructions. Note:
The USB connection on the adapter is intended
for a possible firmware update of the
adapter. DO NOT connect this! If incorrect
Use may cause damage!
Adapter for testing Yamaha PW batteries.
Yamaha batteries are found on various e-bikes.
This adapter allows you to use Yamaha PW batteries
are being tested. An adapter cable AT00038 is
necessary! This is included in the delivery of a
Battery tester. The adapter cable can also
must be ordered separately.
bronze, silver, gold, platinum
Adapter for Panasonic 36V battery. Gazelle (platinum,
gold, silver, bronze). Luggage carrier battery. Suitable
for e-bike batteries with an Imulse mid-motor with
the name Hybrid Mid Impulse. Suitable for the
following models:
Gazelle Orange C8 Hybrid M,
Gazelle Orange C7 Hybrid M.
An adapter cable AT00038 is required! This is
included in the delivery of a Battery Tester.
The adapter cable can also be ordered separately
The new generation Panasonic SIB is suitable for
for Flyer.
An adapter cable AT00038 is required! This is
included in the delivery of a Battery Tester.
The adapter cable can also be ordered separately.
Contents:
- Battery tester
- Plug-in power supply 12Vdc
- Test cable
- USB interface cable
- Thermal printing paper
- Operating instructions
Universal Battery Tester for easy testing
of, among others, Lead, NiCd, NiMH, Lion batteries between the
6V - 48V (min3V - max60V).
Comes with universal test cable (item
AT00039), adapter cable (item AT00038)
(adapters to be ordered separately), power cable,
USB cable, cash register paper, Battery tester PC
Software Program, automatic firmware
updates. Included in the delivery of a Battery Tester is
a universal test cable included. With this
test cable can already test many different batteries
are tested on which voltage can be applied
measured. Batteries where voltage can be measured.
can therefore in principle be measured with a
so-called 'dumb' connection such as the
supplied universal cable part must be tested.
This can be done with the crocodile clips on the + and
the - of the battery to be tested is connected.
For the most common battery systems there is a
'Plug & Play' cable developed so that this
can be easily connected to the battery.
In addition to Plug & Play cables and adapters
we also develop SMART cable parts /
adapters. A SMART cable part / adapter is a
requirement to be able to discharge a battery
(example Bosch, Yamaha). The adapter cable
is included. This is universal and
to connect to different adapters (adapters
must therefore be ordered separately).
Battery Tester PC program works on all
Windows versions (not Mac). If the
Battery tester is connected to a PC which
has access to the internet, can click on
the Batterytester logo in the Software
Program firmware updates are
performed. Battery tester is the most
comprehensive tester in the market: The tester can
test most different batteries in the sense of
lead, Lion, NiMH etc. but also the widest
bandwidth (min3V - max60V). For what
Regarding 12V lead batteries, the following applies:
restrictions to the maximum amperage
with which these can be taxed.
Battery tester automatically detects the
voltage. So you don't need to enter any voltage.
setting the battery to be tested. Fully charged battery
connect and start with 1 push of a button
automatic program that charges the battery with
a varying load against resistance is
tested. At the end of the test, a
receipt can be printed on the tester itself or a
A4 test report showing the capacity
and resistance when connected to a PC or
laptop. The computer software for the
Battery Tester can also be downloaded via
http://flamec.nl/ftp/nl/publish.htm
The Simson Battery LED Headlamp ÃclearlyÄ is a
compact headlamp with a sleek design. The
LED provides a bright beam of light with a
output of 7 LUX. This battery headlamp with
reflector has an easy to operate
push button with on, off and flashing function. The
headlight is suitable for front fork mounting and is
easy to attach to the crown piece of
the front fork. Packed per 10 pieces in a box,
The box is provided with a '1 piece barcode'
the inside which makes the lamp easy to
scanning. Includes 3 x AAA batteries.
The Simson Battery headlamp Classic black is a
classic model headlight in LED version. The
headlight has a black with chrome
housing and an on/off switch on the
top. Can be mounted on, among other things, the
Simson Snaphook using a
Phillips screwdriver. Pack of 10.
in a box, the box is provided with a '1 piece
barcode' on the inside which makes the lamp
easy to scan. Batteries included: 3 x
AAA.
The Simson Battery LED Headlamp ''Bundle'' is
powerful premium quality headlight with a
plastic housing and handlebar mount. The LED
provides a very strong beam of light with a
Output of 25 LUX! This battery headlamp
with reflector has a luxury AUTO/ON//OFF
Push button switch. Install the lamp by
screw closure simple, without the use
of tools, with the supplied
mounting ring on the handlebars. The bicycle light
can then easily be put in and taken out of the
mounting ring can be clicked in. Includes 2 x AA
batteries.
Simson Battery Front Fork Headlight with White LED
and on/off button. The headlight has a
light output of 35 Lux! The headlamp is
suitable for front fork mounting and is easy
to be mounted on the crown piece of the front fork.
Includes lamp hook and batteries: 2 x AAA.
E-approval IA E1 023511
The Simson Battery headlamp Classic chrome is
a classic model headlight in LED version.
The headlight has a silver with chrome
housing and an on/off switch on the
top. Can be mounted on, among other things, the
Simson Snaphook using a
Phillips screwdriver. Batteries included:
3 x AAA..
The Simson Battery headlamp Classic black is a
classic model headlight in LED version. The
headlight has a black with chrome
housing and an on/off switch on the
top. Can be mounted on, among other things, the
Simson Snaphook using a
Phillips screwdriver. Batteries included:
3 x AAA.
