With the BH520 you can control different lamps
from the range, easily mounted on your handlebars
mounting. The bracket is suitable for, among other things
for Axendo, Brio, Kendo and X&O.
Quality mark:
E-approval, K-Mark & Z Mark (StVZO)
K-number K 514
Toplight Flat Plus rear light with LineTec Æ
a patented lens system consisting of
a powerful LED that produces a uniform light band
creates. This makes it for subsequent traffic
much easier to keep the distance to the
to estimate cyclist. Extremely flat housing
(approx. 117 x 50 x 20 mm). With electronic
automatic parking light via capacitor
(no rechargeable battery, no battery needed).
Extremely bright light output with a
320ø beam angle for all-round visibility.
Red reflectors under clear glass. With
plug contacts (center) for power and
Ground connection. Bolt spacing 50 mm and 80
mm.
HALO XE 6-48 VDC, bolt distance 50mm.
With direction indicator and wireless
switch for rear light.
The HALO XEIW is a
rear light with a unique
ultra-compact design due to the
flowing organic lines and a
integrated Z reflector. It
delivers an incredibly effective
light beam to the rear and sides.
Thanks to the integrated Z reflector
and COB LED technology delivers the
HALO brighter, clearer and better
visible light than ever before.
With a visibility distance of up to
500 meters from all sides and a
powerful beam of 8 Candela
This rear light ensures that
approaching traffic in a safe way
distance is kept. The round
The shape of the HALO XE provides a
360-degree visibility, allowing
it is the perfect rear light for
every cyclist. The HALO INDICATOR
has a new and innovative
function: integrated
turn signals. With the wireless
handlebar switch SW009, easy to
pair via Bluetooth, can
cyclists the built-in
activate turn signal and
indicate which way they are going.
Because you can have people behind you
show where you're going
without taking your hands off the
need to get the steering wheel, this adds
extra security.
The HALO INDICATOR is suitable for
all standard e-bike systems from
6-48VDC.
Spanninga E-bike carrier rear light
HALO XE 6-48 VDC, bolt distance 50mm
The HALO XEr complies with ECE
regulations, the German, Danish and
Dutch law."
The HALO XE is a rear carrier light
with a unique ultra-compact design
through the flowing organic lines
and an integrated Z reflector.
It gives an incredible
effective light beam to the rear
and to the side. Thanks to the integrated
Z reflector and COB LED technology
the HALO delivers brighter,
clearer and more visible light
than ever before.
With a visibility distance of up to
500 meters from all sides and a
powerful beam of 8 Candela
This rear light ensures that
approaching traffic in a safe way
distance is kept. The round
The shape of the HALO XE provides a
360-degree visibility, allowing
it is the perfect rear light for
every cyclist. The HALO XE is
suitable for E-bikes with system
for 6-48 VDC. The HALO XE meets
to the ECE regulations, the German,
Danish and Dutch and French
legislation.
Spanninga E-bike carrier rear light
HALO XEr 6-48 VDC, bolt distance 50mm,
with traffic light function
Spanninga E-bike carrier rear light
The HALO XEr is a powerful carrier
rear light with traffic light function.
The rear light has a unique
ultra-compact design due to the
flowing organic lines and the
integrated Z reflector. It
delivers an incredibly effective
light beam to the rear and sides.
Thanks to the integrated Z reflector
and COB LED technology delivers the
HALO brighter, clearer and better
visible light than ever before.
With a visibility distance of up to
500 meters from all sides and a
powerful beam of 8 Candela
This rear light ensures that
approaching traffic in a safe way
distance is kept. The round
The shape of the HALO provides a 360-
degrees of visibility, making it
the perfect rear light is for every
cyclist. The HALO XEr is suitable
for E-bikes with system for 6-48
VDC and comes with a
Traffic light function. This function
improves the security of e-
commuters, because there is a
clear and safe beam of 19
candela is produced as the
cyclist slows down, brakes and stops in
the traffic. The function is
activated at a
speed change (deceleration)
of about 1.25-1.5 m/s, which
results in a
visibility distance of 750 meters.
The PIMENTO rear light is a unique lamp for the
bicycle. It is equipped with the innovative COB LED
technology. The PIMENTO has an extra bright
all-round light beam and a compact size. This
makes the PIMENTO a rear light of very high
quality. It weighs only 20 grams and is available in
an e-bike (6-36VDC) and dynamo version.
The PIMENTO rear light is a unique lamp for the
bicycle. It is equipped with the innovative COB LED
technology. The PIMENTO has an extra bright
all-round light beam and a compact size. This
makes the PIMENTO a rear light of very high
quality. It weighs only 20 grams and is available in
an e-bike (6-36VDC) and dynamo version.
The efficient Reverse Beam Technology (RBT)
The X&O headlamp is equipped with a
powerful beam of 25 Lux, in accordance with the
German and French regulations.
Meanwhile, the lamp maintains a very low current
consumption. This explains why the burning time of the
lamp is relatively high for the light output of
25 Lux. The X&O delivers high visibility up to
no less than 3,000 meters. And this for
6 hours on 2x AA batteries.
In addition, the openings on the sides provide
of the headlight for good visibility of the
cyclist and thus for increased safety.
To turn on the lamp you have to press the button approximately
Press and hold for 2/3 sec.
Light output of 30 Lux.
Visibility up to 70 meters and you will be
seen up to a distance of 3000 meters.
Wide side openings for extra
safety.
The X&O 30 headlamp is one of the latest
developments in the Spanninga range.
This elegant e-bike headlight is equipped with a
miniature version of the PhilipsÓ optics.
Mounted on Bikkel Tuba S
Mounted on Superior eWay
Version: Xb
Light source: 1 red LED
Power supply: battery
Batteries 2 x AA 1.5V
Battery life: >180h
Danish regulations: > 40 hours
Battery low indicator: Yes
Weight: 114g
Blister: Yes
Connection: Carrier
Adjustable to both 50mm and 80mm.
Rear fender with integrated taillight
The NIGHTBLADE MTB mudguard from
high-quality plastic offers thanks to the
front spoiler and the extra long rear spoiler not
only optimal protection against
splashing water. The integrated rear light
with StVZO approval also guarantees
safety on public roads The rear light
with integrated battery is removable and can
can be easily reconnected via a USB connection
charged.
Double protection on dark and wet areas
roads
The soft plastic spoiler also functions as
edge protection when getting on and off. The
SKS NIGHTBLADE can be easily installed using the Quick
Release mount on almost any seatpost
can be mounted and can be mounted thanks to the two
pivot points optimally on a mountain bike
can be adjusted. The lamp is also available separately.
Å Quick Release Mount
Å Made of scratch-resistant, high-quality
plastic
Å With integrated, rechargeable rear light
Å Perfect for mountain bikes
Å Made in Germany
Simson Battery Luggage Carrier Rear Light Taillight
with tunnel LED lighting for extra good visibility
and an on/off switch. Splash and
Rainwater proof. Packed per 10 pieces in a
box, the box is provided with a '1 piece
barcode' on the inside which makes the lamp
easy to scan. Batteries included: 2 x
AA.
The Simson Battery headlamp Classic chrome is
a classic model headlight in LED version.
The headlight has a black and chrome
housing and an on/off switch on the
top. Can be mounted on, among other things, the
Simson Snaphook using a
Phillips screwdriver. Pack of 10.
in a box, the box is provided with a '1 piece
barcode' on the inside which makes the lamp
easy to scan. Batteries included: 3 x
AAA.
This Simson Hub Dynamo Front Fork Headlight
Mobile is a trendy fork headlamp with white LED
and on/off button. The headlight has a
light output of 35 Lux! The headlamp is
suitable for front fork mounting and is easy
to be mounted on the crown piece of the front fork.
Then connect the lamp with the supplied
lighting cord to the hub dynamo.
E-approval IA E1 023511
These plastic trouser clips are a solution if
a bicycle with a
open chain system and you can quickly get on the bike
steps. A trouser clip around the trouser leg prevents
dirty clothes and prevents the trousers from getting in between
chain and sprocket causing dangerous
situations arise. The plastic trouser clips are
strong and long lasting. The reflection ensures
extra visibility and comes from 3M
Scotchlite, the manufacturer of reflective materials.
Specifications:
Feature: clamp pipes 7cm û 6mm
Color (base): gray
Body color: gray
Color reflection: silver
Material: Retroreflective, 360ø
Application: Striking! Left and right too
visible
Weight (kg): 0.024
Unit: 10 pcs.
Presentation (pack): blister with euro slot
Instructions for use: divide the pipes
evenly over the wheels for the best
result.
For testing Shimano e-bike batteries.
The adapter ensures that the battery is active
remains and can be tested.
Suitable for the Shimano BT-E6000,
BT-E6001 and BT-E6010 batteries.
Shimano Steps e-bike batteries are under
other for the following e-bike brands
deployed:
BMC, Cortina, Focus, Gazelle, Kalkhoff,
Merida, Scott, Sparta, Cannondale, dutch id,
HPvelotechnik, Koga, Oxford, Pegasus,
WMS, Bergamont, brinke, Drossiger, KTM,
Puch, Venturelli, Achielle, Alba, Azorbike,
bakfiets.nl, Beaufort, Flanders, Frapp‚,
Olympia, Popal.
An adapter cable AT00038 is required! This
is included in the delivery of a
Battery tester. The adapter cable can also
must be ordered separately.
Besides Bosch and Yamaha, Shimano is a
major player in the e-bike battery field.
Battery tester was already the first that Bosch
could test batteries (even a year before Bosch
itself) and also strives to be the first
are with Shimano.
Instruction:
1. Connect the adapter using the
adapter cable AT00038 to the
battery tester.
2. Slide the adapter into the battery.
3. Press the button on the battery to turn it on.
to change gear.
4. Start the battery tester and follow the
instructions.
Please note: The USB connection on the adapter is
intended for a possible firmware update
of the adapter.
DO NOT connect this! Incorrect use may cause
this causes damage!
