The Eurol Ultrance PSA 0W-30 is suitable for the
latest generation e-HDi engines (from 2013)
of the Peugeot 308 and the BlueDHi engines of the
Citroen DS3 and the C4 Cactus. The engine oil is also
suitable for older Citroen and Peugeot models
for which the specification PSA B71 2290 is required.
- Excellent lubrication and cleaning
- Dispersive and detergent, which makes the engine
stays clean
- Protected against rust and corrosion
- High thermal stability under heavy
operating conditions
- Fuel saving
- Stable lubricating film at cold start
- Suitable for extended maintenance intervals
up to 30,000 kilometers if prescribed
ACEA C2 PSA PEUGEOT CITROâN B712312
Eurol Universal Lithium Grease is a high
performance, multi-purpose NLGI 2 grease with EP
additives and good pumpability. It offers
excellent corrosion protection, has good
antioxidant properties and is very suitable for
high operating temperatures, heavy loads,
shock load and where water and dirt
can penetrate the lubricant contact. It guarantees
optimal protection under heavy conditions
which makes equipment last longer and
maintenance costs decrease.
Performance level:
DIN 51825: KP2.5K-20
ISO-L-XBCHB2.5
Specific values:
Color: dark brown
Density at 20øC: 0,91kg/l
NLGI consistency: 2-3
Universal Transmission Belt Care 150ml is specially
made for the maintenance of Gates belts.
The Belt Care seals and preserves the belt and
allows water to bead up and also provides
protection against pollution. This ensures that
that the belt system always runs smoothly.
The product should be applied thinly to the tread of a
clean belt to be fitted after which it
dries up.
Areas of application:
For universal use in repairs,
maintenance and care. To be used as
lubricant, rust remover, contact spray and
corrosion protector.
Features:
Good penetration
? Loosens lightly rusted nuts and bolts
? Removes old, hardened grease
? Excellent lubrication
? Prevents squeaking and malfunctioning of moving parts
parts
? Good pressure resistance
? Suitable for medium pressure applications
? Very good water displacement
? Prevents corrosion of electrical components
contacts
? Very good corrosion protection
? Reduces long-term corrosion of metals
parts
? Maintains contacts and surfaces
? Contains no silicones, resins or acids
This 24V tube battery (banana battery), NIMH,
is present in the following e-bikes:
Batavus Legato easy, Batavus Padova easy,
Sparta Ion GL model 2008 to 2012
Sparta Ion L model 2009 to 2011
Sparta Ion M-Gear model 2005 to 2008
Sparta Ion MGT+ model 2008
Sparta Ion NXT, Ion XGT
Sparta Amphion SDS model 2008 to 2009
Sparta Ion Basic model 2008
Sparta Ion City model 2005 to 2008
Sparta Ion Classic 2008 to 2010
Sparta Ion Comfort model 2005 to 2008
Sparta Ion Extension model 2007
Sparta Ion Blackline
Gazelle bicycles with the Innergy and Innergy XT
drive system. Cable is suitable for, among other things,
following models: Gazelle Orange Innergy,
Gazelle Medeo Innergy, Gazelle Chamonix Innergy,
Gazelle Fuente Innergy, Gazelle Balance Innergy,
Gazelle Miss Grace Innergy.
Cable for 36V batteries Gazelle Innergy.
Gazelle bicycles with the Innergy and Innergy
XT drive system. Cable is suitable for
including the following models: Gazelle Orange
Innergy, Gazelle Medeo Innergy, Gazelle
Chamonix Innergy, Gazelle Fuente Innergy,
Gazelle Balance Innergy, Gazelle Miss
Grace Innergy. Instructions:
1. Connect the cable to the battery (see photo) and to
the battery tester
2. Press the button (rear light) on the battery to
to activate this.
3. Start the battery tester and follow the instructions.
NB :
Some battery types switch off prematurely
with an error (the rear light is flashing). Follow
then follow the procedure below:
1. Let the battery rest for at least 1 hour.
2. Press the button (rear light) on the battery to
to activate this.
3. Select the "Resume test" option
4. Set the current to 1A.
Bosch Activator Classic
Accessory cable
Adapter for testing 36V Bosch
Classic batteries of 300Wh, 400Wh and
500Wh. The adapter ensures that the battery
remains active and can be tested.The Bosch
Classic batteries are available on various e-bike brands
present: Sparta, Kreidler, Ghos, Koga,
Batavus, Falter, Hercules, Merida,
Bergamont, Cannondale, Centurion, Haibike,
Flyer, Scott, Victoria, Trek etc. Models
2010 - 2013 and Classic models 2014.
Battery placement for both models
luggage carrier as on the frame. An adapter
Cable AT00038 is required! This is included.
with the delivery of a Battery Tester. The
adapter cable can also be ordered separately
become. Instructions: 1. Connect the adapter
using the adapter cable AT00038 to the
battery tester. 2. Slide the adapter into the
battery. 3. Press the button on the battery to
to enable this. 4. Start the
Battery tester and follow the instructions. Note:
The USB connection on the adapter is intended
for a possible firmware update of the
adapter. DO NOT connect this! If incorrect
Use may cause damage!
Adapter for testing Yamaha PW batteries.
Yamaha batteries are found on various e-bikes.
This adapter allows you to use Yamaha PW batteries
are being tested. An adapter cable AT00038 is
necessary! This is included in the delivery of a
Battery tester. The adapter cable can also
must be ordered separately.
Adapter for testing 26V E-Motion batteries.
First generation E-motion:
Sparta E-Motion C1: Models 2011 to 2013,
Sparta E-Motion C2: Models 2010 to 2013,
Sparta E-Motion C3: Models 2011 to 2012,
Sparta E-Motion CS2: Models 2011 to 2012,
Sparta Country Tour Electric: Models 2011 to
2013,
Sparta Pick-up electric: Models 2011 to 2012,
Sparta Amazone 4 life: Models 2012 to 2013,
Sparta E-Motion C2 model 2014 to 2015,
Sparta E-Motion C3 model 2013 to 2015.
An adapter cable AT00038 is required!
This is included in the delivery of a Battery
tester
The adapter cable can also be ordered separately.
Adapter Smart Impulse, Derby Cycle 1.0 - 2.0 (not
for EVO, EVO RS). Impulse batteries are used under
other used in bicycles from Derby Cycle,
Kalkhoff, Raleigh, Gazelle, Rixe, Bulls and Focus.
An adapter cable AT00038 is required! This is
included in the delivery of a Battery Tester.
The adapter cable can also be ordered separately
Cable for testing Accell e-bike batteries
ION PMU-2 and PMU-3. Not for PMU-4
(Rosenberger magnetic plug)!
This battery should be charged in the following manner
tested (see image): The red wire on the bottom
sliding plug of the fuse and the black one on the left
above. For a good measurement it is important that
the battery has been fully charged shortly before.
Without roll, only the holder45x30x23cm45x30x23cmWithout roll, only the holder
COLOR: GREY
Material: metal
BRAND NAME: PRIMP
TARGET GROUP: UNI
KEYWORD: HOLDER
Adapter for testing third-generation Bosch batteries. Adapter for testing Bosch BES3 batteries (PowerPack, CompactTube, PowerTube, PowerMore). With a Battery Tester, you're up-to-date and can test all generations. The adapter ensures the battery remains active and can be tested.
WD?40 Multi-Use Product protects metal from rust and corrosion, penetrates stuck parts, stops squeaking, repels moisture, and lubricates virtually everything. It even removes grease, grime, and more from most surfaces.
