BASIL DOWNTUBE ELECTRIC CAP FOR SHIMANO STEPS/YAMAHA, neoprene cover to protect the battery connection when the Shimano Steps/Yamaha battery is removed from the bike, 4.5 mm thick neoprene, black lime
The Super B TB-BB30 bottom bracket tool is a handy tool for installing and removing bottom brackets with a 20-tooth interface. This wrench is suitable for various Shimano and ISIS bottom bracket systems and ensures a firm and accurate fit during use. Thanks to its robust construction and ergonomic design, the wrench lies comfortably in the hand, allowing you to efficiently loosen or tighten bottom brackets. Ideal for use in the workshop or when maintaining bicycles. Specifications: - Model: Super B TB-BB30 - Type: bottom bracket wrench - Interface: 20 teeth - Suitable for: Shimano and ISIS bottom bracket systems - Application: installation and removal of bottom brackets
For safe and fast rivet connections For blind rivets made of aluminium and steel, up to 5 mm Stainless steel up to 4 mm Rivet breaks off with little effort Nose pieces and key storage in the body of the pliers Dimensions / length: 255 mm Net weight: 0.5 kg
Minoura Wheel Truing Stand FT-500 Pro Brand: Minoura Colour: black Material: aluminum / Plastic / Steel Model: FT-500 Suitable for wheels up to 29 FAT Includes 12 / 15 mm thru-axle adapters Includes two very accurate micrometers Hub width maximum 197mm Adapters for 12/15mm thru-axles are included
IceToolz Cassette / Disc Brake Lockring Remover. Cr-Mo steel Applicable for Shimano® Saint Center Lock disc brakes Suitable for 1/2" drive (#24053R4) or 24mm wrench (#2404724) Inner diameter 27.5 mm Features: Dimensions: 4.5 x 3.2 x 3.2 cm Weight: 0.080 kg Colour: grey Material: Cr-Mo steel
IceToolz Xpert - Repair Stand, ø 5cm, article no.: E134, suitable for 2 bikes. For floor mounting: base plate 10x10cm, 4-hole, quick release adjustable for hanging heights from 130-180cm, includes Tool Tray #240E132T. To be completed with: steel base plate (600x600x8mm) #240E132B. Tools shown are optional.
6-piece Torx screwdriver set from Hazet with hanging hole in the handle. Hazet - high-quality materials and the best workmanship - for a long service life. Specifications: With hanging hole in the handle. Non-slip Hazet 3-component handle - for high power transmission. Surface: blade matt chrome-plated, tip polished. Set consists of 6 Torx screwdrivers: T10 - T15 - T20 - T25 - T27 - T30
Inspection lamp Osram Led Dirt-resistant and robust inspection lamp with clip and magnet on the lamp base. Durable and powerful LEDs for perfect illumination of the work environment. Product details: Robust and impact-resistant housing Dirt-resistant surface With magnet and clip Magnet on the lamp base Practical clip Non-slip surface Robust and impact-resistant housing Ideal for short distances Dirt-resistant surface 8 high-quality and durable LEDs
HAZET 2157-3 Folding Knife, 115 mm Folding knife with locking function Can be used in the workshop, industry, warehouse or simply as a hobby knife The locking function prevents the knife from accidentally opening, ensuring maximum safety! Ergonomic aluminum handle with finger recesses Blade made of high-quality stainless steel Lightweight, modern design with a convenient clip for attaching the knife to your belt
Luxury bleeding kit from EZ MTB for hydraulic disc/rim brakes. Suitable for both mineral and Dot oil. This complete kit is suitable for almost all brake systems. Product details: 2 bleed syringes 3 caliper blocks Funnel and plug 12 metal adapters suitable for most applications Hose clamp Manual Fits brake systems from Shimano (also with M7 nipple), Avid, Sram, Magura, Hayes, Tektro, Hope, Formula
Product details bleed kit Luxury 2022 Suitable for both mineral and Dot oil. This complete kit is suitable for almost all braking systems. 2 bleed syringes Filling hose 3 caliper blocks Funnel and plug 12 metal adapters suitable for most applications Wrench 7-8 Torx wrench T10-T15 Hose clamp 2 elastic bands for mounting Manual Latex gloves Fits braking systems from Shimano, Avid, Sram, Magura, Hayes, Tektro, Hope, Formula This improved bleed kit replaces the previous article 707101
IceToolz Xpert SuperLifter repair stand no.: E139 Also for E-Bikes up to 60kg. Rotatable rubber clamping jaw for ø25.4mm ~ ø55mm (same as # 240E137S). Adjustable height setting from 60cm to 190cm (23.6"~74.8"). 1 rotation of the handle provides 10cm of height difference. Integrated wheels offer better portability. Large footprint provides stability for the bike up to the highest point. Includes tool tray. Total height 167.8 cm, weight: 40.7kg.
Diameter 26x1.5mm This product is suitable for the following models: MBK Club 50 AIR 2T '91-'03 MBK Dakota 50 AIR 2T '04-'08 MBK Evasion 50 AIR 2T '88-'99 MBK Hard Rock 50 AIR 2T '91-'02 MBK Kansas 50 AIR 2T '04-'08 MBK Magmun 50 H2O 2T '88-'93 MBK Magmun Racing 50 H2O 2T '89-'95 MBK Magmun Racing XR 50 H2O 2T '96-'03 MBK Passion 50 H2O 2T '88-'99 MBK Phenix 50 AIR 2T '04-'08 MBK Rock 50 AIR 2T '87-'89
Minoura Wheel Truing Stand FT-50 Very stable and robust truing stand. Suitable for wheel sizes up to 29 x2.1. Gauges can be stored in the base of the device when not in use or during transport. If you are unsure whether your wheel is properly aligned, always consult a professional mechanic before hitting the road! Maximum hub width 148mm Material: aluminum / steel / plastic Suitable for wheels from 16 to 29 Weight 4.0kg Dimensions: W=250mm/H=420mm/D=220mm~ 330mm
EZ MTB bleed kit for hydraulic disc/rim brakes. Suitable for both mineral and Dot oil. This complete kit is suitable for almost all brake systems. Product details: Bleed syringe Bleed bottle including hose and clamp Filling hose 2 pieces caliper block Funnel and plug 9 plastic adapters suitable for most applications Combination spanner 7-8 Torx wrench T10-T15 Hose clamp 2 elastic bands for mounting Manual Suitable for brake systems from Shimano, Avid, Sram, Magura, Hayes, Tektro, Hope, Formula
Minoura work stand W-3100 + tool tray, foldable Steel stand with a maximum working height of 141cm. Clamp rotatable 360° and suitable for a maximum tube diameter of 65mm. Only suitable for round tubes (frame or seat post). If you have a bicycle with a carbon frame or very thin aluminum, clamp the bicycle to the seat post and not to the frame! Unfolded dimensions: H=141cm / W=66cm / D=60cm Foldable Weight: 7.6kg Maximum load capacity: 30kg
CYCLUS TOOLS snap.in bottom bracket puller, compatible with: FSA MegaEVO bottom bracket (guide bolt SN-77-F item no.: 7202777). TOKEN Ninja BB386 For a functional tool, you still need the holder item no.: 7202750, and the guide bolt SN-77-F (Art.-No.: 7202777) is also recommended. With this combination of holder, puller and the matching guide, professional assembly and disassembly of the bottom bracket is possible without slipping and tilting. Another advantage is that this guide can also be used with other tools from the snap.in range. Please observe the tightening torque specified by the manufacturer for each bottom bracket.
Product details bleed kit Lite 2022 Is suitable for both mineral and Dot oil. This complete kit is suitable for almost all braking systems. 1 bleeding syringe Filling hose 3 caliper blocks Funnel and plug 12 plastic adapters suitable for most applications Spanner 7-8 Torx wrench T10-T15 Hose clamp 1 elastic band for assembly Manual Latex gloves Suitable for braking systems from Shimano, Avid, Sram, Magura, Hayes, Tektro, Hope, Formula Compared to 2018 lite: Funnel capacity increased to 35 ml. The size of the funnel plug has been increased to optimize the user experience. A caliper block has been added, making it compatible with SHIMANO road brakes. This improved bleed kit replaces the previous article 707100
Multimeter digital This Fluxon digital multimeter is suitable for many different measuring tasks. The large display always shows the measured values clearly. Measurement functions: AC/DC voltage AC/DC current resistance continuity diode test capacitance frequency duty cycle room temperature NCV test Features: measurement category = CAT III - 1000V / CAT IV - 600V 20A LCD display with 19999 counts automatic / manual range selection material = ABS update ratio = 3 times per second true RMS data hold backlight low battery indication auto power off battery type = 2x 1.5V AAA Specifications regarding measuring range, accuracy, etc. are listed in a table in the included manual. Supplied including test leads.
HAZET hexagon screwdriver with T-handle, 7-piece. The 7-piece HAZET hexagon key screwdriver set with T-handle is very different from common sets of this type. The feel of the individual wrenches in your hand - a real pleasure. How much more effective and flexible the HAZET wrenches can be used in the most diverse available spaces - great! The difference between quick screwing (ball head side) and powerful screwing - sensational! This HAZET set is a must for every hobby mechanic. Product specifications: ergonomic HAZET 2-component T-handle hex shaft with ball head. Shaft length long side: 100-200 mm. Shaft length short side: 15-25 mm. Total length: 118-234 mm. Surface: chrome-plated, tip blued. Wrench sizes: 2, 2.5, 3, 4, 5, 6, 8. Number of tools: 7
The lockring remover is used for mounting and dismounting Shimano Steps 8000 E-bike motor lockrings. To ensure that the required torque forces are safely transferred, the tool is secured in the motor axle by the integrated guide and connected to the lockring by means of a pull-push mechanism. The teeth are designed in a reinforced shape, thicker than usual. This way, the tool can deliver high torque when loosening or tightening the lockring, guaranteed without slipping. The tool can be used in combination with snap.in tool holder (art. 7202750) or 32 mm combination wrench. When tightening, observe the tightening torque recommended by the manufacturer. Use a 3/8" torque wrench (art. 720115) to check the torque. Note! The lockring remover cannot be used with power tools.
CYCLUS TOOLS snap.in Pinion gearbox lockring tool, compatible with: Pinion gearbox C-Line Pinion gearbox P-Line The lockring remover is used for mounting and dismounting Pinion gearbox C- and P-Line lockrings. To ensure that the required torques are safely transmitted, the tool is secured in the motor shaft by the integrated guide and connected to the lockring by means of a push-pull mechanism. In this way, the tool can deliver high torque when loosening or tightening the lockring, guaranteed without slipping. The tool can be used in combination with a snap.in tool holder (art. 7202750) or a 32 mm combination wrench. When tightening, observe the tightening torque recommended by the manufacturer. Use a 3/8" torque wrench (art. 720115) to check the torque. Note! The lockring remover cannot be used with power tools.
CYCLUS TOOLS snap.in bottom bracket remover, compatible with: SHIMANO Hollowtech II (guide pin SN-73-F Art. No.:7202773) MICHE EVO Max (guide pin SN-73-F Art. No.:7202773) CAMPAGNOLO Ultra and Power Torque (guide pin SN-74-F Art. No.:7202774) SRAM GXP (guide pin SN-75-F Art. No.:7202775) SHIMANO Disc Brake Lock Ring with 20 mm/15 mm E-thru Axle. For a functional tool, you also need holder art. no.:7202750 and possibly additional parts such as an adapter or a guide. It is recommended to use the snap.in guide pin SN-73-F (art. no.: 7202773), SN-74-F (art. no.: 7202774) or the guide pin SN-75-F (art. no.: 7202775). With this combination of holder, remover and the correct guide, professional assembly and disassembly of the bottom bracket is possible without slipping and tilting. Another advantage is that it can also be used with other tools in the snap.in family. Please observe the tightening torque specified by the manufacturer for each bottom bracket.
This Van Beijck charger is the replacement for the Tranzx MDA 11542002000 5-pin XLR model. This charger is controlled by an MCU and can charge all types of lithium and lead batteries. TranzX Li-Ion 4-stage Van Beijck battery charger (replacement for the CH02 5-pin plug model) (This charger is only suitable for 36V Li-Ion TranzX batteries) 5-pin Tranzx model MDA 11542002000 charger is supplied in a Van Beijck housing and this charger is also equipped with smart charging technology. The charger is suitable for charging TranzX BL03, BL05, BL06, and BL07 batteries for electric bicycles, among others. The charger has a clear LED charging indicator. VanBeijck chargers typically have a 4-stage (Winter charger) charging characteristic. This results in better battery charging than with conventional chargers. This charger is used for Sachs - Winora - Victoria - Hercules - Staiger - Pegasus and Panther bicycles, among others. The product may differ from the photo; the technical specifications will always be the same. Technical specifications: Dimensions: 170mm x 70mm x 38mm Battery material: ABS Plastic Cooling: Passive Mains voltage: 110 - 230V Output voltage: 42V Maximum charging current: 4.0A Battery capacity: 7 - 20Ah Charging characteristic: 4 stages Li-Ion: Yes Charging plug: 5 Pin XLR Neutrik Suitable for: TranzX Li-Ion batteries
SHIMANO STEPS - Down Tube Battery - 418 Wh The BT-E6010, designed specifically for the SHIMANO STEPS system, mounts to the down tube and has a capacity of 418 Wh. Capacity: 418 Wh (36 V, 11.6 Ah) Charging time: 4 hours Temperature: 0°C~+40°C (while charging) -10°C~+50°C (while in use) Battery life: *1000 cycles * After 1000 cycles, it still achieves more than 250 Wh = 60% when fully charged (reference) Specifications: Model: BT-E6010 Series: SHIMANO STEPS E6100 Series Color: Black Average weight: 2.65 kg Notes * Via EC-E6000. EC-E6000-3 for Japan. ** BT-E6010 for Japan (10.9 Ah, 393 Wh, Black only) Chemical properties: Lithium-ion Position: Down tube Rated voltage (V): 36 Rated capacity (Ah): ** 11.6 Rated capacity (Wh): 418 Battery life cycles: 1,000 (more than 60%) Charging time (hours) SOC = 100%: * 4 Charge level display: Yes Error signal: Yes System on/off switch: Yes Compatible holder: SM-BME61 | BM-E6010 Compatible charger: EC-E6000, EC-E6000-3 (for Japan), EC-E6002, EC-E8004 Interchangeable battery holder: BM-E6010 Charging time (hours) SOC = 50%: * 1.5 Charging time (hours) SOC = 80%: * 2
The Basil Downtube Battery Cover is a battery cover for the Yamaha downtube battery. The cover comes in a black lime color. The Basil Downtube Battery Cover is a sleeve that fits a Yamaha downtube battery. The battery cover improves the lifespan and performance of your e-bike battery. The cover is made of 4.5 mm thick neoprene. This material ensures that heat is retained longer, thereby protecting the battery cover against cold when temperatures are below 15 degrees Celsius. In addition, the battery cover also protects against shocks and damage. The battery remains easily accessible, even with the cover around it. Thanks to the various holes, the remaining battery life is easy to read. The battery cover is available in black with lime-colored details. Tip: protect your battery also during transport of your bike with the Basil Frame Electric cap. This neoprene cover protects the battery connection when the battery is removed from the bike. Features: Protects the Yamaha downtube battery of your electric bicycle against cold, shocks and damage. Improves battery life and performance in cold weather. We recommend using the battery sleeve at temperatures below 15 degrees Celsius. 4.5 mm thick neoprene. Battery status is visible. Specifications: Dimensions: 31 cm x 11 cm x 9 cm (Outer dimensions) Activity: Commuting, recreational Color: Black Material: Neoprene System: Velcro
With the Beta 2056E Filled Tool Case 020560010, you have a compact tool case containing the most commonly used tools. This way, you always have everything at hand. Contents of the tool case: 1256/C21-1 Precision Bit Set 861/C61 Bit Set (1/4" hex drive) 42C Combination Wrenches (8-1-10-11-12-13-14-15-16-17-18-19 mm) 96BPC/SC9 Hex Key Set (1.5-2-2.5-3-4-5-6-8-10 mm) 111 Adjustable Wrench (250 mm long) 1048C Water Pump Pliers (240 mm long) 1128BMX Scissors 1082CM Diagonal Cutting Pliers (160 mm long) 1150CM Combination Pliers (180 mm long) 1166CM Long Nose Pliers (160 mm long) 1201E Slotted Screwdriver Set (3x75 - 4x125 - 5.5x150 - 6.5x150 mm) 1202E Phillips Screwdriver Set (PH1x80 - PH2x100 mm) 1209PZ Pozidrive Screwdriver Set (Pz1x80 - Pz2x100 mm) 1253 Voltage Tester 1370C Hammer 1692/5 Tape Measure (5 meters) 1725CR Hacksaw (frame 250 mm) 1771 Utility Knife (18 mm blade) 895/1 Socket with 1/4" drive to hex bit drive C900 Sockets 1/4 inch. (4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 mm) C900/20 Extension Bar: 50 mm (1/4" drive) C900/20L Extension Bar 100 mm (1/4" drive) C900/25 Universal Joint C900/30 Screwdriver Handle (1/4" drive) C900/42 Sliding T-Handle (1/4" drive) 900/48 Ratchet (1/4" drive) C920A Sockets 1/2 Inch. (10-11-12-13-14-15-16-17-18-19-21-22-24 mm) C920/21 Extension Bar 125 mm (1/2" drive) C920/22 Extension Bar 250 mm (1/2" drive) C910/16F Reducer 3/8 - 1/2 C920/25 Universal Joint (1/2" drive) C920/72 Ratchet (1/2" drive) Please note - The case cannot be ordered separately (afterwards)!! Technical data of Beta 2056E Case dimensions: 450 x 330 x 142 mm Weight: 11000 grams
Product Specifications: The 2022 STD brings a new connection mode. (1) No plunger funnel needed (2) Depressurization shunt (3) Free-rotating embedded metal funnel connector for three purposes: funnel & syringe & bleed bottle Supports any operation as you like (1) Quick Connect System: The connector can be quickly connected to the funnel or syringe by simply plugging it in. The precise alignment between the retaining ring and the clamping groove creates a freely rotatable sealing state between the connector and the syringe. After EZmtb precision NC matching, it offers a more flexible and safer user experience. (2) Funnel without plunger: This is an innovation to improve the condition of excise use. It is a funnel without a plug, which is insensitive to operate - when the funnel is used, the oil circuit is closed. You no longer have to worry about losing the plug. Everything is simple, easy, and efficient to use. But most importantly: it's cool, isn't it? (3) Funnel pressure relief shunt When injecting brake oil into the caliper end, by introducing air into the oil circuit, the resistance of the oil circuit will be reduced, and the potential safety risk of vertical splashing of brake oil into the funnel will be caused. The innovative funnel neck is designed as a "step-down reducer" that reduces the mixing of oil and air by restricting the direction and flow rate of brake oil in the funnel. The brake oil is evenly distributed in the four directions, allowing small bubbles to be removed faster and making use safer. Wide compatibility: Supports new road disc brakes such as Campagnolo and Magura, as well as hundreds of updated mainstream mountain oil brakes. 10 connectors: Each connector can be connected to the brake via a funnel, a syringe, or a bleed bottle. Compatible with mainstream brake models over the past ten years. Contents: 2 bleed syringes Filler hose 3 pieces caliper block Funnel and plug Bleed bottle including hose and clamp 10 metal adapters suitable for most applications No thread at the bottom of the funnel, it can be quickly replaced with a plug-in adapter. Spanner 7-8 Torx wrench T10-T15 Hose clamp 2 elastic bands for mounting Manual Latex gloves
The Cyclus Chaincut'r counter and splitter is suitable for chains from BMX to 12-speed. It counts the desired number of chain links and then shortens the chain. For fixed mounting on a workbench.
Stella bikes are widely distributed and popular in the Netherlands. It can happen that a charger stops working or breaks down, even with these bikes. We supply a replacement Stella charger of type 2, which has a 5-pin charging connector. This Stella charger has a charging speed of 2 amps, which means you can charge 2 amps per hour into your battery. Product specifications: Dimensions: 170 x 70 x 38 mm Material: ABS plastic Cooling: Passive Output voltage: 42.0V Maximum charging current: 2.0A Charging characteristic: 4 stages Application: Lithium-ion (Li-ion) Charging plug: 5-pin round plug Article number: 21119
Advent Calendar 2025: The Beta Advent calendar is the perfect gift for any fan of high-quality tools: behind the 24 doors are more than 24 tools, accessories, and a practical case. Complete tool kit: The set includes a set of 10 colored screwdriver bits, 1 magnetic bit holder for the screwdriver, 4 screwdrivers, 1 ratchet, and 8 socket wrenches with chrome-plated connections, suitable for any job and DIY activity. Includes case: This unique calendar not only offers a selection of practical and innovative tools but also includes a robust and handy case to neatly store all tools and always have them within reach. Christmas gift idea: With the Beta Advent Calendar 2025, you have a door to open every day, making the countdown to Christmas even more exciting. Certified quality: Beta's production processes comply with ISO 9001 quality standards, a certification that accompanies the product from raw material to customer service. PLEASE NOTE: This product is not in stock with us. As soon as you order this product from us, we will place the order with the supplier. The product therefore has a longer delivery time. Beta Special Gifts
This battery charger replaces the SSLC084V42XH model. This charger is controlled by an MCU and can charge all types of lithium batteries. 36V smart charger (Model 5-pin triangular charging plug) replacement charger for model SSLC084V42XH. Suitable for, among others, Stella type 2 and Fischer 36V Li-Ion batteries. The 5-pin Stella charger is supplied in a Van Beijck casing and features 4-stage smart charging technology. Please check the connector plug before ordering, as there are 2 types of chargers with the same model number. This charger can also be ordered optionally as a 4A fast charger. VanBeijck battery charger for charging a Stella type 2 Li-Ion 36-volt electric bicycle battery. The charger has a clear LED charging indicator. Van Beijck chargers always have a standard 4-stage (Winter Charger) charging characteristic. This means that batteries are charged better than with conventional chargers. This Stella battery charger is used for the following Stella models: Allegra, Avenza, Azzurro, Durante, Fiore, Forte, Giraldo, Livorno, Modena, Nantes, Novara, Sardena (from 2015), Verona, and Vicenza. The product may differ from the photo, but the technical specifications will always be the same. Dimensions 167mm x 69mm x 40mm Battery material ABS Plastic Cooling Passive Mains voltage 110V 240V Output voltage 42V Maximum charging current fast charger 4.0A Battery capacity 7 20Ah Charging characteristic 4 stages Winter Charger Li-Ion battery Yes Charging plug 5 pins Features: Suitable for 36V Stella type 2 batteries
