Cyclus Snap.in guide pin
Compatible with FSA MegaEvo
RaceFace BB30
DUB
Guide prevents slipping and tilting
Protects components during use
Can be used for other Snap.in tools
Saves space and costs in the workplace
Holder art. 77202750 required
Matching Snap.in insert required
Please note the torque recommended by the manufacturer
Cyclus Snap.In bearing extractor
Removes press bearings and bearing cups
Suitable for inner diameter 22 to 30 mm
Maximum outer diameter of bearing cup 45 mm
Not suitable for BB386 Press Fit cups
Place the puller claws correctly behind the bearing
Use adapter ring according to bearing size
Snap.In holder 77202750 is required
Cyclus Snap.in locknut remover Yamaha Giant
Compatible with PW-X series (Yamaha)
SyncDrive Pro Series (Giant)
For mounting and dismounting E-bike lock nuts
Integrated guide in the motor shaft
Pull-push mechanism connects to the lock nut
High power transmission without slipping
To be used with Snap-in holder art. 77202750
Or 32mm combination wrench
Please note the torque recommended by the manufacturer
Use 3/8" torque wrench art. 7720115 for checking
Not suitable for power tools
Cyclus Snap.In axle guide
Compatible with SRAM GXP
Prevents slippage and damage during use
Guide can also be used for other Snap.In tools
Holder art. 77202750 required for use
Matching Snap.In insert required (e.g. 77202706)
Adhere to manufacturer's torque when mounting
Cyclus Snap.In axle guide
Compatible with Campagnolo Ultra Torque
Compatible with Campagnolo Power Torque
Prevents slippage and damage during use
Guide can also be used for other Snap.In tools
Holder art. 77202750 required for use
Matching Snap.In insert required (e.g. 77202706)
Adhere to manufacturer's torque when mounting
Cyclus Snap.In guide bolt for bottom bracket M15x1
Ensures stable conduction and high force
Prevents the tool from slipping
Compatible with any M15x1 thread
Suitable for Shimano Octalink
Suitable for Shimano BB-7700
Suitable for ISIS Drive
Suitable for Truvativ BB Gigapipe
Suitable for Bosch Active Line motor
Suitable for Bosch Performance Line motor
Indispensable for professional installation
Prevents slippage and damage
Also usable with Snap.In tools
Saves space and costs in the workshop
Holder 77202750 and Snap.In insert required
Adhere to the manufacturer's tightening torque
Cyclus Snap.In guide bolt for bottom bracket M12x1
Ensures stable conduction and high force
Prevents the tool from slipping
Compatible with any M12x1 thread
Suitable for ISIS Drive
Suitable for Panasonic motor with torque sensor
Suitable for Bosch Classic and Classic+ Line
Indispensable for professional installation
Prevents slippage and damage to parts
Also usable with Snap.In tools
Saves space and costs in the workshop
Holder 77202750 and Snap.In insert required
Adhere to the manufacturer's tightening torque
Cyclus Snap.in tool case 2.0
For mounting bottom bracket bearings and cassettes
Includes tool holder and inserts
With clamp plate for wall or nail wall mounting
Suitable for all common axle systems
Supports SHIMANO, Octalink, Hollowtech II
Also TRUVATIV, FSA, ISIS, CAMPAGNOLO, ROHLOFF
Including torque wrench adapter
Can be expanded with cutting tools
Supports press-fit and e-bike tools
All Snap-in tools at hand
Handy and space-saving suitcase
Parts also available separately
Cyclus Snap.In crank bolt remover
Compatible with 15mm hex bolts
Especially suitable for crank bolts
Holder art. 77202750 required for use
Additional adapter or guide may be required
Adhere to manufacturer's torque when mounting
Cyclus Snap.In crank bolt remover
Compatible with 4mm hex bolts
Especially suitable for crank bolts
Holder art. 77202750 required for use
Additional adapter or guide may be required
Adhere to manufacturer's torque when mounting
Cycle Snap-In puller
Compatible with Atom freewheel
Compatible with Maillard freewheel
Compatible with Regina freewheel
Suntour freewheel 2-slot 4/5/6 speed SN.31-C
Index Z2 18.6
Holder art. 77202750 required for use
Additional adapter or guide may be required
Adhere to the manufacturer's tightening torque
Cyclus freewheel remover
Suitable for Suntour
Compatible with Suntour freehub 4 slots
Index Z4 19.2
Holder art. 77202750 required for use
Additional adapter or guide may be required
Maintain manufacturer's torque
Cyclus Snap.In freewheel remover
Suitable for BMX, Sparta ION
For 10 mm axle diameter
Compatible with BMX freewheel 4 slots
Index Z4 19.0
Holder art. 77202750 required for use
Additional adapter or guide may be required
Maintain manufacturer's torque
Cyclus Snap.In freewheel remover
Suitable for BMX, Sparta ION
For 16 mm axle diameter
Compatible with BMX freewheel 4 slots
Index Z4 29.5
Holder art. 77202750 required for use
Additional adapter or guide may be required
Maintain manufacturer's torque
Cyclus Snap-In bottom bracket adjuster
Compatible with Race Face BSA30
Rotor BSA BB30
Enduro BB30
Index Z12 44.0
Holder part 77202750 required
Additional adapter or guide may be required
Please note the torque recommended by the manufacturer
Cyclus Snap.In bottom bracket adjuster
Compatible with Shimano Ultegra SM-BBR60, BB-MT800
Shimano BSA Hollowtech 2 - BB-MT800 (XT/SLX/LX)
Index Z16 39.0
Guide provides stable hold of the tool
Maximum power transmission guaranteed
Slipping is a thing of the past
Holder art. 77202750 required for full use
Additional adapter or guide may be required
Recommended Snap.In guide bolt SN-73-F art. 77202773
Professional installation without slipping or tilting
Guide can also be used for other Snap.In tools
Adhere to the manufacturer's tightening torque
Cyclus Snap.In bottom bracket wrench
For conventional 36 mm bottom bracket bearings
Suitable for right house
Holder art. 77202750 or 77202749 required
Combination holder, puller and guide required
Professional mounting and dismounting without slipping
Guide can also be used with other Snap.In tools
Adhere to the manufacturer's tightening torque
Cyclus Snap.In bottom bracket adjuster
Compatible with ISIS Drive
Compatible with Truvativ BB Power Spline
Conductor art. 77202770/71/72 depending on wire
Index Z20 32.0
Holder art. 77202750 required for use
Additional adapter or guide may be required
Recommended Snap.In guide SN-70-F / SN-71-F / SN-72-F
Professional mounting and dismounting without slipping
Guide usable with other Snap.In tools
Adhere to the manufacturer's tightening torque
Cyclus Snap.In bottom bracket adjuster
Compatible with Shimano Octalink Dura Ace
BB-7700 and BB-7710
Use a guide for a stable grip
Guarantees maximum power transmission
Slipping is a thing of the past
Index Z6 41.0
Holder art. 77202750 required for use
Additional adapter or guide may be required
Recommended Snap.In guide SN-72-F 77202772
Professional installation without slipping
Guide usable with other Snap.In tools
Adhere to the manufacturer's tightening torque
Cyclus workshop tools with handles
For mounting/dismounting of bottom bracket bearings
Compatible with Campagnolo, FAG, OFMEGA, KINEX, KSS
Snap.In bottom bracket remover suitable for Shimano XTR/Ultegra
Truvativ Gigapipe and Brose E-Motor compatible
Use with Snap.In holder #77202750
Thick rubber handles for high torque
Place tool in spline connection of bottom bracket
Turn spring loaded insert into crank bolt hole
Installing/removing the bottom bracket without slipping
Lower bearing bushing: keep clean and lubricated
Please note frame and torque according to manufacturer
Cyclus Snap.In bottom bracket adjuster
Compatible with OFMAGA
Compatible with FAG
Compatible with SKF
Compatible with Shimano Nexus BB UN-10
Compatible with Campagnolo 4-sided bottom bracket
Mirage Veloce Xenon Centaur Daytona
Compatible with Sachs
Conductor SN-70-F requires art. 77202770
Index Z6 37.0
Holder art. 77202750 required for use
Additional adapter or guide may be required
Recommended Snap.In thread guide SN-70-F
Professional installation without slipping
Guide usable with other Snap.In tools
Adhere to the manufacturer's tightening torque
Cyclus Snap.In bottom bracket adjuster
Compatible with Campagnolo 4-sided bottom bracket
Record, Chorus, Athena (conductor SN-70-F, 77202770)
Miche Bahn + Evolight (conductor SN-70-F, 77202770)
Stronglight JP SBB (guide SN-70-F, 77202770)
Index Z12 23.5
Holder art. 77202750 required for full use
Additional adapter or guide may be required
Recommended: Snap-in thread guide SN-70-F
Professional installation without slipping or tilting
Guide can also be used with other Snap.In tools
Adhere to the manufacturer's tightening torque
Cyclus Snap.In bottom bracket adjuster SN.01-I
Compatible with Shimano Compact
Shimano BB-UN 51/71/72 (guide SN-70-F, 77202770)
Tecora (conductor SN-70-F, 77202770)
Shimano Octalink BB-7700/6500/5500 (guide SN-72-F, 77202772)
Index Z20 32.0
Basic holder 77202750 required for full use
Additional adapter or guide may be required
Recommended: SN-70-F or SN-73-F conductor
Professional installation without slipping or tilting
Guide can also be used for other Snap.In tools
Adhere to the manufacturer's tightening torque
High quality and dimensional accuracy
Made in Europe
Continuous new development
Tested by professionals
Lock nut remover for Bosch E-bike BCD 4 motor
Index Z8 36.8
For mounting and dismounting lock nuts
Teeth of cap reinforced and thicker than normal
Suitable for high torque values
To be used with Snap-In holder art 7202750
Or with a 32 mm combination wrench
Or with 3/8" square head
Please note the torque recommended by the manufacturer
