Gearbox oil
Gearlube GL-4 80W-90 is a mineral lubricating oil
for mechanical transmissions, based on
high-quality solvent-refined base oils,
to which special 'Extreme Pressure' additives
have been added to achieve the following properties
to acquire:
- Good resistance to oxidation
- Good anti-rust, anti-corrosion and anti-foam properties
assets
- Low pour point
- Good 'Extreme Pressure' Properties
Application:
Gearlube GL-4 80W-90 used in hypoid
rear axles, gearboxes and others
transmissions, in which 'Extreme Pressure'
baptized oils are prescribed.
Outer packaging: 12 x 1l bottles
Water-based polishing wax
Polish Wax is a high-quality water-based wax.
Its special composition makes it suitable
for matt paint, metal, aluminium, titanium,
carbon and plastic. It provides a
excellent protection, deep gloss and
intensifies the original color. The wax in a
Apply a thin layer. Polish with a soft,
Lint-free cloth. Shake well before use.
Do not use in direct sunlight or on hot
surfaces, this may cause stains.
Vanilla scent.
Degreaser
BioSol XT is a very powerful, biological
Biodegradable degreaser. It removes oils,
greases, waxes and polishes of metal,
aluminum, titanium, carbon and plastic.
BioSol XT is pH neutral, solvent-free
and phosphates and mix with water.
Instructions for use:
Spray BioSol XT onto the surface and brush it in.
with a soft brush. Leave for a few minutes
work. Rinse with water and dry with
a soft, lint-free, absorbent cloth or
blow dry with air. Re-lubricate the chain
cleaning as soon as possible with one of the products
from the TefTec or BioTec line.
Electric Spray (PV) is a silicone-free
moisture displacer, developed in our own laboratory
with special properties. Corrosion due to moisture
is the biggest enemy of all metal parts and leads
annually causes major damages in industry,
households and road traffic. Electric Spray contains
additives that displace all moisture and a
protective layer of 0.002 mm thickness is
formed on all treated surfaces.
This extremely fine layer provides a final
protection into the pores of the metal.
Application:
Electric Spray (PV) is a moisture displacer and is
suitable for the ignition of a car.
Can also be used as:
- Penetrating Oil (Loosing rusted
parts)
- Metal protector (Preservation of degreased
to share)
- Cleaning agent (Cleaning contact points)
- Contact spray (Preserving contact pins)
Outer packaging: 12 x 300 ml pump spray
Silicone spray
Silicon Spray is a high-quality protective agent
against rust, dirt and moisture. The product has
good lubricating properties and can be used very widely
used as a preservative and protective agent
of various utensils such as hinges
and locks, electrical installations, rubber,
plastic, chrome and leather.
Application:
Silicon Spray is very suitable as
protective equipment, widely applicable in and around the
house:
- Lubricants for moving parts that operate in
come into contact with moisture
- Protective equipment against frostbite
- Preservative, has a moisture-repellent effect
- Preservative for rubber, plastic and
chrome parts
- Protects against sticking and makes learning
shoes and boots waterproof.
Not suitable for waterproofing clothing and
textile
Outer packaging: 12 x 300 ml pump spray
PTO MoS2 is a highly penetrating,
rust-loosening fluid, which is used under the
formed rust layer of rusted metal parts
PTO MoS2 contains additives which
the well-known dry lubricant Molybdenum sulfide
(MoS2) and colloidal graphite, which makes the product
excellent lubrication and extra protection
protects against corrosion and wear.
Application:
PTO MoS2 is suitable for making
all metal parts stuck to rust such as
bolts, screws, nuts, hinges, etc.
outer packaging: 12 x 300 ml pump spray
Copper grease mounting paste
Copper + Plus is a lead-free anti-corrosion paste.
The product consists of finely divided
copper particles in a non-meltable
bentonite base, to which very effective
anti-oxidation and corrosion inhibitors are
added.
Copper + Plus forms a film between the metal parts
which can withstand very high temperatures
(up to 1350 degrees). In addition to these properties,
Copper + Plus provides good protection against corrosion
moisture and vibrations. The product is insensitive
for acids, water, brine and lye.
Application:
Copper + Plus is a heat-resistant, lead-free
mounting paste. It protects metal connections that
exposed to, for example, high temperatures,
water or chemicals, against rust or corrosion.
When assembling metal parts Copper
+ Plus to use, the parts can be used even after
years, easy to disassemble again. Copper + Plus
fitted between brake pads and brake cylinder
prevents annoying squeaking.
Caution! Do not apply to the brake disc!
Outer packaging: 12 x 100 gr tube
Tefspray PFTE is a universal lubricant with
PFTE. Additives, developed in-house
laboratory. Tefspray PFTE contains additives
which makes it remove all moisture and a
protective layer on all treated surfaces
leave behind. PFTE is a contemporary product that you
know about the non-stick coating in your pans.
Tefspray PFTE reduces metal-to-metal
contact which makes the friction noticeable
reduces. Tefspray PFTE has a large
penetrating power, allowing all corners and
holes can be reached.
Application:
Tefspray PFTE is suitable for lubricating
tools, hinges, cables, bearings and
chains etc. and gives for a low
period a well-adhering lubricating film.
Due to the protective film and anti-corrosion
additives do not affect materials
due to corrosion. It removes moisture and dirt from
electrical contacts and connections and let
a protective layer behind that again
prevents dirt from adhering.
Outer packaging: 12 x 300 ml pump spray
High-performance lubricant with PFTE
TefTec AS (All Season aerosol) is a
high-quality lubricant. It contains a
high concentration of PTFE which makes it
is suitable for normal use under all
weather conditions. TefTec AS works
friction-reducing and moisture- and dirt-repellent.
In addition, it offers very good adhesion, good
lubrication and protection of bicycle parts.
TefTec AS is suitable for derailleur, chain,
shifters, cables and other moving parts.
First thoroughly clean the parts to be lubricated with
Kroon-Oil BioSol XT. Then apply TefTec AS
and excess product with a lint-free cloth
Remove. Shake well before use!
(Vanilla scent)
Use in: All weather conditions
Use by: Universal, Athletes
(MTB/ATB, Racing bike, BMX), but also
everyday and recreational use.
Frequency of use: Apply regularly
depending on the intensity of use and the
bicycle parking.
High-performance lubricant with PFTE
TefTec AS (All Season Bottle)
is a high-quality lubricant.
It contains a high concentration of PTFE
making it suitable for normal
use in all weather conditions.
TefTec AS has a friction-reducing and moisture-repellent effect
dirt-repellent. In addition, it offers very good
adhesion, good lubrication and protection
of the bicycle parts. TefTec AS is suitable for
derailleur, chain, shifters, cables and other
moving parts. Parts to be lubricated
First clean thoroughly with Kroon-Oil BioSol XT.
Then apply TefTec AS and remove any excess
Remove product with a lint-free cloth.
Shake well before use! (Vanilla scent)
Use in: All weather conditions
Use by: Universal, Athletes
(MTB/ATB, Racing bike, BMX) but also everyday and
recreational use.
Frequency of use: Regular lubrication depending on
of usage intensity and bicycle parking
Biodegradable lubricant
BioTec AS (All Season Bottle)
is a universal, technological
high-quality lubricant. Due to the special
composition is biodegradable.
BioTec As has a friction-reducing, moisture- and
dirt-repellent, ensures very little wear and tear
prevents corrosion. BioTec AS is suitable for
derailleur, chain, shifters, cables and other
moving parts. Parts to be lubricated first
Clean thoroughly with Kroon-Oil BioSol XT. Then
Apply BioTech AS and remove excess product with
Remove with a lint-free cloth. Regularly
repetition prevents excessive wear.
Use in: All weather conditions
Use by: Universal, Athlete enthusiasts
(MTB/ATB, Racing bike, BMX) but also everyday,
use and recreational.
Condition: Regular lubrication depending on
intensity of use and bicycle parking.
Replacement for the 02019
Previously 110 ml.
Scoogear 75W-90 is an extremely modern
synthetic transmission oil specially developed
for scooters. By using
thin-liquid, synthetic base oils in
combination with the use of advanced
additives, the following properties are
obtained:
- Good 'Extreme Pressure' properties for
extra protection against wear
- Very good resistance to high
operating temperatures resulting in a lower
oil lifespan
- Excellent switching performance, both at extreme
low temperatures as well as extremely high temperatures
- Prevents foam formation
Application:
Scoogear 75W-90 is specially developed for
optimal use in the most heavily loaded
transmissions of the current generation of scooters.
Outer packaging: 12 x 100 ml bottles
Ceramic grease
Gear Grease EP 00/000 is semi-liquid,
multipuerpose fat based on good
refined, highly viscous base oils with a
lithium soap as a thickener.
'Extreme Pressure' and other additives are
added to have the following properties
to acquire:
- Strong adhesion to metal
- Excellent water displacement
- Very good stability
- Good anti-corrosion and anti-wear properties
- Very good pumpability
- Excellent 'Extreme Pressure' properties
Application:
Gear Grease EP 00/000 is extremely suitable for
central greasing systems and for closed, but
non-oil-tight gearboxes.
Outer packaging: 6 x 600 gr jar
