This IceToolz bracket socket wrench is suitable for
bottom bracket cups with a diameter of 52.2 mm.
This is the T47 and EnduroÓ PF30 bottom bracket.
The IceToolz bracket socket wrenches are equipped with
a recess where a torque ratchet wrench
fits perfectly so that the bracket fits correctly
can be tightened to a certain torque. IceToolz
The article number of this bracket socket wrench is M099.
This IceToolz cone wrench set is a
professional set of cone wrenches that fit in no
A single workshop may be missing. The IceToolz
cone keys are made from the sturdy
chrome-molybdenum steel (Cr-Mo) which says something
about the quality of these cone keys. The
cone keys are finished with a pleasant
rubber handle. And the length of 20cm is
long enough to provide sufficient power
set. The IceToolz article number of this
cone key set is 47X3.
This IceToolz cone wrench set is made
Made of Cr-Mo steel, so nice and sturdy.
with a comfortable grip. The cone keys
are a solution for repairs where the cups
and lock nut must be loosened and the
Regular handle wrenches are too thick. The IceToolz
Cone keys then offer a solution. This set
cone wrenches are the most common sizes
Many jobs require 2 cone wrenches to
for example loosen the lock nut of the cone
turning. But it is not necessary to have a double
to buy a set of cone wrenches, often have
the cone and the lock nut are a different size. And
complete set of cone keys is sufficient per
workplace.
Key size
13 mm
14 mm
15 mm
16 mm
17 mm
18 mm
19 mm
This IceToolz cone wrench is a professional
cone wrench that should not be used in any workshop
missing. The IceToolz cone wrenches are
made of strong chrome-molybdenum
steel (Cr-Mo) which says something about the quality of
this cone wrench. The cone wrench is finished
with a comfortable rubber handle. And the length
23cm is long enough to provide sufficient
to be able to exert force. The IceToolz
The article number of this cone wrench is 4713.
This IceToolz cone wrench is made of
Cr-Mo steel, so nice and sturdy. Equipped with
a comfortable handle. The cone keys are
a solution for repairs where the cups and
lock nut must be loosened and the
Regular handle wrenches are too thick. The IceToolz
Cone keys then offer a solution.
Many jobs require 2 cone wrenches to
for example loosen the lock nut of the cone
turning. But it is not necessary to have a double
to buy a set of cone wrenches, often have
the cone and the lock nut are a different size. And
complete set of cone keys is sufficient per
workplace.
The IceToolz cone wrenches are available in sizes: 13,
14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 and
25mm
This IceToolz cone wrench set is a handy set
cone keys that can be used on both sides
are. The IceToolz cone wrenches are made
made of strong chrome-molybdenum steel (Cr-Mo)
which says something about the quality of this
cone wrenches. The IceToolz article number of
this cone wrench set is 37X3.
This IceToolz cone wrench set is made
Made of Cr-Mo steel, so nice and sturdy.
with a comfortable grip. The cone keys
are a solution for repairs where the cups
and lock nut must be loosened and the
Regular handle wrenches are too thick. The IceToolz
Cone keys then offer a solution. This set
cone wrenches are the most common sizes
Many jobs require 2 cone wrenches to
for example loosen the lock nut of the cone
turning. But it is not necessary to have a double
to buy a set of cone wrenches, often have
the cone and the lock nut are a different size. And
complete set of cone keys is sufficient per
Workplace. These IceToolz combination cone wrenches are
available in sizes: 13-14, 15-16 and 17-18mm
This IceToolz high pressure pump is a sturdy
steel pump with an ergonomic handle and
a pressure gauge that is positioned a little higher for
better readability. The beautifully shaped
high pressure pump is suitable for all valves
through the duo head. The high pressure pump has a
capacity of no less than 280 cm². Both the
pump hose (IceToolz number 451H) if the pump
duo head (IceToolz number 451V) are
replaceable. The IceToolz article number of
this high pressure pump is A451.
The IceToolz high pressure pump is a well thought-out
pump. The duo head ensures that all
valves can be inflated. The long
pump hose of this high pressure pump is over the
ergonomic handle to click into place
the pump which immediately fixes the pump
The fact that the hose and head are available separately is
also a great relief. This is a sign of
durability and quality. The pump head is fixed
to be placed on the valve with the turning knob, this
does not simply come loose while pumping.
In short, a purchase for the long term.
IceToolz Chain Cleaner with 20 brushes for
4-sided intensive cleaning. Includes 1 spare
sponge. Equipped with rubber bracket for
attachment to the rear fork so that
cleaning easier and more efficient
is being used. Patent pending.
IceToolz Xpert E323 digital slide caliper
scale 0.01mm 150mm/6inch
silver|black
accurate to within one hundredth of a millimeter
measure outside, depth, inside or
entry sizes
Material: Stainless steel
Application: LCD screen with 10mm digits
With on/off, zero setting and switch from mm to inch
Tolerance:
ñ 0.02mm at <100mm
ñ 0.03mm at >100~150mm
Quality mark: ISO-9001:2015
Packaging: box (plastic)
IceToolz Xpert wheel straightener with thru axle adapter
Suitable for 18Ã~29Ã rims
Application: Traditional axle, QR and thru axle
Suitable for different axles: quick release,
through axle and traditional axles
The nylon ball prevents damage to the rim
or paint while measuring
IceToolz Xpert - Spoke tension measuring tool
readout via analog Japanese MitutoyoÓ meter
at 0.01mm,
Check accuracy regularly with
the self-test instructions
Suitable for rim sizes 18Ã and larger
Includes: Spoke tension conversion table (kgf)
Precision: 0.01mm
Read out via Japanese MitutoyoÓ meter
The IceToolz spoke holder for flat spokes is
an indispensable tool for work on
a wheel with flat spokes. When tightening
it is advisable to remove the flat spoke from the nipple
to stop. This spoke holder for flat
spoke is suitable for flat spokes of 1mm and
1.5mm thick. The IceToolz article number of the
spoke holder for flat spoke is 12T4.
It is advisable to use the flat spoke at the
tighten the nipples slightly against
hold. This spoke holder for flat spokes is
designed so that the opening is slightly wider,
which allows you to quickly catch the spoke and quickly
you can continue with the next spoke. Both
spokes of 1mm if those of 1.5mm thick can
are held back with the spoke holder
for flat spoke from IceToolz.
This IceToolz clamp spring for nipple-
spoke tensioner 12S4 or 12S5 can be easily
be replaced. The clamp spring is fitted with a
small (allen) bolt fixed in the nipple-
spoke tensioner. The IceToolz article number of
this clamp spring is 12S4S.
The clamp spring holds the nipple during the
insert into the high rim. Since this is a
is a consumer item, can it break or be
lose power. No worries, the clamp spring for
the nipple spoke spanner is just
replaceable.
Ideal for hubs, nuts, bolts, bearings and BB
High-quality lubrication even when used sparingly
usage
Protects against corrosion, heat and moisture
Suitable temperature: -25? ~ 200?
Volume: 4oz. / 120ml
This IceToolz grease gun is virtually indispensable in
every workshop. In combination with the tube
copper grease (IceToolz number C172) works
professionals in the industry with the best
materials to secure parts,
to prevent wear on bearings and
to promote heat conduction when braking.
IceToolz article number of this grease gun is
C178
Copper grease is an ideal remedy for sticking
for example to prevent bearing cups, but
This actually applies to all connections of 2
different metals, a steel bolt in a
aluminum stem orµ Fill it in. But
that messing around with a jar of grease and a brush on
The workbench is also a thing of the past. This could be better.
and neater with this grease gun and a tube
IceToolz copper grease (C172)
Specifications
Å Environmentally friendly product ensures fast and
effective cleaning
Å concentrated degreaser
Å non-corrosive substances
Å 1:3 ratio shampoo/water
Packaging: bottle
This environmentally friendly cleaner provides a quick
and effective way of cleaning
Non-corrosive with excellent
cleaning capacity
Dilute cleaner with water to a
ratio of 1 cleaner: 3 water
Volume: 4oz./ 120ml
Specifications
Å 120ml
Å resistant to high temperatures
Å specially developed for E-Bikes
Color: transparent
Weight (kg): 0.122
Includes: high cooling capacity and works like a
electrical insulator
Packaging: bottle
Electrical insulator
Suitable for e-bikes
High heat resistance
High cooling capacity
Maintain viscosity during use
Cr-V steel
The IceToolz long Allen key 8mm 35V8 is the
Allen key that is used a lot
is used with multiple IceToolz
tools. The 8mm connection is
for example with many freewheel buyers and
cassette removers. The 8mm long Allen key is
made of Cr-V steel and equipped with a
pleasant soft grip. The IceToolz article number
of this 8mm allen key is 35V8.
This Allen key is often used in the
IceToolz range as a handle for
cassette and bracket removers
for example. The soft grip ensures a pleasant
grip, especially useful if a lot of force has to be applied
become. The chrome-vanadium quality
guarantees a long lifespan.
This IceToolz spare blade is for the IceToolz
cable cutter for hydraulic lines.
The IceToolz article number of this spare blade is
54A1S.
The blade for the Icetoolz cable cutter hydraulic
pipes is a sharp product that lasts a long time.
But of course a knife is a wear product and
it may need to be replaced at some point.
This spare blade for the IceToolz cable cutter has
article number 54A1.
To be used for:
Shimano, SRAM, SunRace, Chris King
Shimano MF compatible freewheels & Campagnolo
cassettes and bottom brackets (Record, Chorus & Athena)
Material:
Cr-V steel
The IceToolz cassette remover for the
cassette lockring is a commonly used item in a
bicycle workshop. This customer with a
chrome vanadium quality guarantees
a long lifespan. This buyer can
be used with an 8mm Allen key
(IceToolz number 35V8). The IceToolz customer is
suitable for:
Shimano® CS, SRAM, SunRace, Chris King
compatible cassettes and ShimanoÓ Center Lock
disc brakes / ShimanoÓ MF compatible
freewheels & CampagnoloÓ cassettes (all) and
bottom brackets (Record, Chorus, and Athena)
The IceToolz article number of this HG
customer is 09C5.
With this IceToolz cassette lockring tool you can
lockring that secures the cassette to the body
be loosened. After this comes the wreath
sprockets of the cassette free and they can
be replaced. Before loosening it is
necessary to use a second tool, a
so-called freewheel remover. The
The direction of rotation of the HG ring is the freewheel
direction. So a tool is needed to turn the cassette
to stop. This cannot be done with the bare hand.
This really needs a tool that can
gears not damaged.
Specifications
Å Universal kit for all hydraulic
disc brake systems
Å Compatible with AVIDÓ, FORMULAÓ, HAYESÓ,
HOPEÓ, MAGURAÓ, ShimanoÓ
Includes: One pair of NBR gloves (#17G3)
Å Reusable pull strip for fastening the
oil hoses on the brake calipers and 2 clamps
to stop the flow of oil
Å New oil guns with adapter for a
good attachment of the oil hoses
Å suitable for use with Mineral and DOT oil
Suitable for AVIDÓ, FORMULAÓ, HAYESÓ,
HOPEÓ, MAGURAÓ, ShimanoÓ
Suitable for use with Mineral and DOT oil
Reusable pull strip for fastening the
oil hoses on the brake calipers and 2 clamps
to stop the flow of oil
Includes 1 pair of nitrile rubber gloves
(#17G3)
New oil guns with adapter for good
confirmation of the oil hoses
