Protect your e-bike shoes and pant legs from splashing water with wider mudguards. Our LATZ E-Plus mud flap prevents splashing rainwater from getting your shoes, pant legs, or bike trailer wet and dirty when riding on wet roads. The mud flap extends the bottom of the mudguard, as these often don't drain away splashwater sufficiently. Next time you commute to the office or go for a bike ride, your shoes and pant legs will stay dry. Besides protecting your clothing while riding on wet roads, the LATZ E-Plus also prevents flying stones from damaging the frame's paintwork. The mud flap is made from a truck tarpaulin and is attached to the lower section of the mudguard as an extension. Thanks to the reinforced material, the mud flap retains its shape even at higher speeds and in headwinds, making it ideal for use on e-bikes. The LATZ E-Plus can be optionally mounted on front or rear mudguards with a tread width of 70 to 90 mm. Features: Fits SKS Bluemels 75 U mudguards and other Extra wide Mud flap version fits mudguards with and without crossbar from 70 - 90 mm (ideal for e-bikes) Colour: Black Material: Truck tarpaulin Reinforced and optimised for use at higher speeds Length: approx. 230 mm | Top width: 93 mm | Bottom width: 120 mm Weight: approx. 40 g Designed in Berlin. Manufactured in cooperation with workshops for people with disabilities. Scope of delivery: Mudflap LATZ and 3 x cable ties Assembly: Thread a cable tie from behind through the two holes on the left and right side of the flap so that the pointed ends are at the top and the lock is at the bottom. Now turn the mudguard over and position it in the middle of the lower end of the mudguard. Place the cable ties on the left and right sides of the mudguard crossbars and tighten them. Cut off the protruding ends of the cable ties with side cutters.
Fire-retardant e-bike battery bag. The BATTERY SAFETY BAG is a high-quality bag for safely transporting and storing e-bike batteries. Made of heat-resistant material, it can significantly slow the spread of a battery fire, allowing you to react appropriately. Batteries with a maximum circumference of 37 cm and a maximum length of 50 cm fit in the Battery Safety Bag. It is suitable for intube, rear-rack, and frame batteries from various manufacturers such as Bosch, Shimano, Brose, BMZ, etc. It also fits Bosch PowerTube batteries with 500, 625, and 750 Wh. The bag's roll closure allows it to be adjusted to fit various battery sizes. Its strong and durable construction securely protects its contents. The bag is easy to handle and features a sewn-in aramid fabric, allowing you to carry it or attach it to a rear rack, for example. Depending on the type of rear rack, it may be helpful to add additional padding to prevent chafing. The bag’s outer material is optimized for temperature resistance, not abrasion resistance. The bag has a removable neoprene inner sleeve. The sleeve provides additional protection and padding, and makes packing and removing the battery easier. Length: 66 cm Width: 11 cm Height: 10 cm Compact size when folded: 22 cm x 12 x 3 cm Weight: 330 g. When transporting a battery, it should always be secured twice.
LATZ Snap Mudflap Our LATZ Snap mudflap prevents splashing rainwater from getting your shoes, pant legs, or bike trailer wet and dirty when riding on wet roads. The mudflap extends the bottom of the mudguard, as these often don't drain away splashwater sufficiently. Next time you drive to the office or go for a bike ride, your shoes and pant legs will stay dry. Besides protecting your clothes when riding on wet roads, the LATZ Snap also prevents thrown stones from damaging the frame's paint. The mudflap is made from a truck tarp and is attached to the bottom of the mudguard as an extension. Thanks to the reinforced material, the mudflap retains its shape even at higher speeds and in headwinds, making it ideal for use on e-bikes. Latz E-Plus Snap: Fits bikes with wide tires and mudguards, such as Riese Müller e-bikes. Suitable for 20" front wheels of Cargobikes with wide tires, e.g. Urban Arrow, Riese & Müller etc. Length from mounting point: 205mm Note: Fits mudguards with very high or without struts. Removable clamp mounting on the mudguard, independent of the strut position Features: Color: Black Material: Truck tarpaulin Reinforced and optimized for use at higher speeds Designed in Berlin. Manufactured in cooperation with workshops for people with disabilities. Scope of delivery: LATZ mud flap and 1 piece of self-adhesive Velcro. Installation instructions: Stick the piece of self-adhesive Velcro horizontally on the mudguard in the desired position. Attach the mudguard and then bend the ends of the stainless steel tape around the edges of the mudguard. Press the bend with a flat tooth so that the tape lies flat on the inside of the mudguard.
Protective cover for handlebar controls or mini-displays such as the Bosch Purion. When your e-bike is parked outdoors for extended periods or transported by car, the individual components are exposed to the elements. The REMOTE UNIT COVER is a protective cover for your e-bike's handlebar controls or the socket for removable displays. It is also suitable for mini-displays such as the Bosch Purion. The protective cover protects the components on the handlebars from rain, snow, frost, and damage. Especially when transporting your e-bike by car, strong impacts from driving rain and swirling water can cause malfunctions or defects in the electronics. You can store your e-bike's display in the DISPLAY WALLET protective cover during transport. The REMOTE UNIT COVER is made of high-quality, flexible neoprene. The cover is securely attached to the handlebars with industrial-strength Velcro fasteners. The protective cover is compatible with handlebar remote controls from Bosch eBike Systems, Shimano Steps, Yamaha eBike Systems, and other systems. Material: Padded neoprene. Color: Black. Attachment: Velcro. Designed in Berlin, manufactured in the EU.
Handle for easily carrying (electric) folding bikes. NEW: Revised version with neoprene inlay for non-slip and scratch-free mounting. Our handle is positioned at the center of gravity when folded and unfolded. Ideal for climbing stairs and using public transport. The attached luggage handle ensures safe and easy handling of the bike. Made of reinforced canvas with high-quality Velcro fasteners. Technical information: Length: 21 cm. High-quality and durable materials. Non-slip locking mechanism on the bike thanks to neoprene lining. Weight: 85 g Designed in Berlin and made in Germany. Created in collaboration with workshops for people with disabilities.
FRONT RACK is a minimalist front carrier. Our model, specifically designed for Brompton folding bikes, simply clicks into place above the carrier block and is just as quick to remove. The carrier can also remain folded on the folding bike. Bags and boxes can be carried on the carrier. For mounting instructions, please refer to our optional tension strap. You can also use this carrier with Vello bikes, provided they have a Carrier Block installed. Our BOTE bags, which fit on the carrier, are very user-friendly. They have suitable mounting straps on the back, allowing them to be quickly attached to the carrier. Mounting note: When sliding the carrier onto the block, ensure the block's locking hook engages in the designated opening on the carrier. To do this, firmly push the carrier onto the block and, if necessary, move it slightly back and forth. If the locking hook does not engage: Loosen the mounting screw of the plastic hook, slide the hook all the way up and retighten the screw. Features: Colour: Black steel, powder-coated Weight: 480 grams Length of the bottom L: 18 cm Length of the top L: 17.5 cm Width: 15.8 cm Max. load 10 kg Fits folded and unfolded Scope of delivery: RACK (without additional support block!)
The KOMPLIZE - multifunctional bag for use on and off the bike. One main compartment and three slip pockets. Two belt loops allow you to attach it to almost any part of the bike, such as the handlebars, frame, or under the saddle. A strap extension has been added so the bag can be worn as a waist or shoulder bag. Versatile uses: - phone, wallet, keys - slim rain jacket - spare tube, tools, energy bar - or a combination of all. Dimensions: 17 x 12 x 6 cm, weight: 100 grams. Material/color: truck tarpaulin and recycled polyester / matte black.
Reflective MINI BELT - high-visibility lashing strap. Our practical lashing strap, made from recycled material, has been popular for a long time. Here we present it with great added value. The fabric is reflective. Features: Dimensions: M: 35 cm x 2 cm (length x width) XL: 70 cm x 2 cm (length x width) Material: high-visibility nylon-cordura. Maximum load capacity: 2 kg / 20 N Infinitely adjustable Contents: 2 straps
Reflective MINI BELT - high-visibility lashing strap. Our practical lashing strap, made from recycled material, has been popular for a long time. Here we present it with great added value. The fabric is reflective. Features: Dimensions: M: 35 cm x 2 cm (length x width) XL: 70 cm x 2 cm (length x width) Material: high-visibility nylon-cordura. Maximum load capacity: 2 kg / 20 N Infinitely adjustable Contents: 2 straps
MINI STRAP - the small tensioning aid Our practical tension strap, made from recycled tarpaulin, is ideal for securely fastening small items to your bike. Whether you use an e-bike, gravel bike, or mountain bike, the MINI STRAP quickly attaches to your bike and helps you transport small items. The sun hat on the child's bike or a small snack can be attached quickly and easily. But also consider securing the wheel of a folding bike on the train. Features: Dimensions: 35 cm x 2 cm Material: Recycled tarpaulin Maximum load capacity: 2 kg / 20 N Contents: 2 straps
Cargo Strap L300 Lashing Strap. The CARGO STRAP ensures that your luggage is transported safely and stays in place. Suitable for cargo bikes, trailers, and luggage carriers. The plastic buckle prevents damage to the load and the bike. The self-tightening strap prevents the load from slipping. Features: Length: 300 cm, Width: 25 mm, Tension force: 150 daN / 150 kg. Strap material: Polyester. Buckle material: POM. Weight: 100 g. Made in Germany.
Cargo Strap L300 Lashing Strap. The CARGO STRAP ensures that your luggage is transported safely and stays in place. Suitable for cargo bikes, trailers, and luggage carriers. The plastic buckle prevents damage to the load and the bike. The self-tightening strap prevents the load from slipping. Features: Length: 300 cm, Width: 25 mm, Tension force: 150 daN / 150 kg. Strap material: Polyester. Buckle material: POM. Weight: 100 g. Made in Germany.
Cargo Strap L300 Lashing Strap. The CARGO STRAP ensures that your luggage is transported safely and stays in place. Suitable for cargo bikes, trailers, and luggage carriers. The plastic buckle prevents damage to the load and the bike. The self-tightening strap prevents the load from slipping. Features: Length: 300 cm, Width: 25 mm, Tension force: 150 daN / 150 kg. Strap material: Polyester. Buckle material: POM. Weight: 100 g. Made in Germany.
TOUR-Rack - Bike carrier for Klickfix adapters. Developed and optimized over two years, the FAHRER Tour Rack now offers the perfect combination of elegance, lightness, and load-bearing capacity. In combination with tension straps such as the FAHRER MINI STRAPS or CARGO STRAP, almost anything can be transported: as light and flexible as possible, can be attached with just one hand, and fits all types of handlebars, including racing handlebars. Everything is possible, whether you're on a bikepacking tour or needing a small everyday transport solution. Simple but effective. The Tour Rack fits existing Klickfix handlebar adapters. It fits handlebars with standard stems and comes with clamps for handlebar diameters of 22-26 mm and 31.8 mm. For e-bikes with a Bosch Intuvia display, the Klickfix E-Universal handlebar adapter is required. Dimensions (loading box): 29 x 16 cm. Weight: 35 g Material: Aluminum Surface: rough or black powder-coated. Max. load capacity: 5 kg.
Set consisting of a UNI BAG and UNI Adapter. The items are pre-assembled and ready to use. The UNI adapter with the stability you expect. The Uni-Adapter is a bicycle accessory that allows you to mount the FAHRER UNI BAG, a water bottle cage, or other accessories on bicycle frames where a water bottle cage cannot be mounted. This is very useful if your bicycle frame does not have a water bottle cage thread or if the mounting thread is blocked. It is attached to the frame with two non-slip Velcro fasteners. It consists of a plastic holder with two threads and a soft TPU backing that flexibly adapts to different shapes. The adapter can be attached to various locations on the bicycle frame, such as the seat tube or the head tube. This adapter is a practical solution to ensure you always have a water bottle with you during your ride, regardless of where the mounting thread for the water bottle cage is located. Highlights: Universally mountable Tested with round, concave, and hydroformed tubes with various profiles Specially shaped TPU element provides some suspension while providing additional anti-slip function Mounting with anti-slip Velcro fasteners Typical M5 thread spacing of 65 mm Weight: 28 g Material: Plastic and TPU Perfect for using our UNI BAG as a flexible frame bag UNI BAG - Universal waterproof carrying bag. Who hasn't been there? Where do you put your chain lock while cycling? In your backpack, it pulls on your shoulders, and in your basket, it rattles around all the time. With the UNIBAG, we offer a solution for easily and space-savingly storing a chain lock, for example, on the frame. Of course, you can also use the UNI BAG to transport a water bottle or a tool kit for your next bike tour. Features: Waterproof construction Roll top closure Can be used as a carrying handle and PVC-free tarpaulin Reinforced interior Can be mounted to all bikes with 65mm hole spacing (stainless steel Torx screws included) Diameter 9cm, Height 25cm Volume 1.5 litres Max. recommended load: 1kg Weight: 95g Fits perfectly with your: Chain lock Sunglasses Gloves Phone Tools Supplies Tie down straps Windbreaker or many other gear.
2x small ratchet straps made from recycled truck tarpaulin to securely fasten all your medium-sized items... affectionately called "Turbo Banana Holder", now also available in an XL version to suit your needs. The small and practical ratchet strap, made from recycled tarpaulin, to securely attach small items to your bike. Features: Dimensions: 70 cm x 2 cm Material: Recycled tarpaulin Maximum load capacity: 2 kg / 20 N Infinitely adjustable Contents: 2 straps
2x small ratchet straps made from recycled truck tarpaulin to securely fasten all your medium-sized items... affectionately called "Turbo Banana Holder", now also available in an XL version to suit your needs. The small and practical ratchet strap, made from recycled tarpaulin, to securely attach small items to your bike. Features: Dimensions: 70 cm x 2 cm Material: Recycled tarpaulin Maximum load capacity: 2 kg / 20 N Infinitely adjustable Contents: 2 straps
2x small ratchet straps made from recycled truck tarpaulin to securely fasten all your medium-sized items... affectionately called "Turbo Banana Holder", now also available in an XL version to suit your needs. The small and practical ratchet strap, made from recycled tarpaulin, to securely attach small items to your bike. Features: Dimensions: 70 cm x 2 cm Material: Recycled tarpaulin Maximum load capacity: 2 kg / 20 N Infinitely adjustable Contents: 2 straps
MINI STRAP - the small tensioning aid Our practical tension strap, made from recycled tarpaulin, is ideal for securely fastening small items to your bike. Whether you use an e-bike, gravel bike, or mountain bike, the MINI STRAP quickly attaches to your bike and helps you transport small items. The sun hat on the child's bike or a small snack can be attached quickly and easily. But also consider securing the wheel of a folding bike on the train. Features: Dimensions: 35 cm x 2 cm Material: Recycled tarpaulin Maximum load capacity: 2 kg / 20 N Contents: 2 straps
MINI STRAP - the small tensioning aid Our practical tension strap, made from recycled tarpaulin, is ideal for securely fastening small items to your bike. Whether you use an e-bike, gravel bike, or mountain bike, the MINI STRAP quickly attaches to your bike and helps you transport small items. The sun hat on the child's bike or a small snack can be attached quickly and easily. But also consider securing the wheel of a folding bike on the train. Features: Dimensions: 35 cm x 2 cm Material: Recycled tarpaulin Maximum load capacity: 2 kg / 20 N Contents: 2 straps
MINI STRAP - the small tensioning aid Our practical tension strap, made from recycled tarpaulin, is ideal for securely fastening small items to your bike. Whether you use an e-bike, gravel bike, or mountain bike, the MINI STRAP quickly attaches to your bike and helps you transport small items. The sun hat on the child's bike or a small snack can be attached quickly and easily. But also consider securing the wheel of a folding bike on the train. Features: Dimensions: 35 cm x 2 cm Material: Recycled tarpaulin Maximum load capacity: 2 kg / 20 N Contents: 2 straps
MINI STRAP - the small tensioning aid Our practical tension strap, made from recycled tarpaulin, is ideal for securely fastening small items to your bike. Whether you use an e-bike, gravel bike, or mountain bike, the MINI STRAP quickly attaches to your bike and helps you transport small items. The sun hat on the child's bike or a small snack can be attached quickly and easily. But also consider securing the wheel of a folding bike on the train. Features: Dimensions: 35 cm x 2 cm Material: Recycled tarpaulin Maximum load capacity: 2 kg / 20 N Contents: 2 straps
Optimal load securing with the Maxi Strap luggage carrier lashing strap. The Maxi Strap ensures the safe transport of your luggage on a front or rear luggage carrier. With a maximum length of 75 cm, it is the longest version in our range of luggage carrier lashing straps and is particularly suitable for the front racks of, for example, Riese & Müller e-bikes. Whether it's a bag for the office, a bike ride, or a blanket for a day at the lake, the elastic luggage carrier lashing strap reliably keeps your load in place. Made in Germany, the Maxi Strap consists of a thick and robust webbing. The luggage carrier lashing strap is UV-resistant, making it durable and providing reliable load securing. Using loops, the two ends of the Maxi Strap are quickly and easily attached to the luggage carrier. The 180-degree rotated loop ensures the lashing strap lies flat against the luggage carrier tube, creating an evenly distributed pressure point. The high-quality nylon buckle ensures easy opening and closing. Features: UV-resistant luggage carrier strap Length adjustable from approx. 34 - 75 cm Tool-free and flexible installation High-quality nylon buckle. Colour: black. Dimensions: approx. 34 - 77 cm x 2.5 cm (L x W) Weight: approx. 50 g
The BOTE is an elegant backpack made from recycled polyester with a waterproof PU coating. It attaches to the Brompton's front carrier in one easy step. The strap system allows for easy and secure storage. The 10-liter main compartment includes an additional pocket for documents. There's an additional pocket on the front for small items like wallets or keys. The two side pockets are ideal for bottle or lock holders. For added visibility and safety, reflective strips are attached to both sides of the bag. Features: Material: Tarpaulin/recycled polyester, Color: Mixed, water-repellent, Dimensions: 32 x 27 x 11 cm, FSX-Standard
Responsibly produced commuter bike bag. Bike bag made of waterproof tarpaulin material and water-repellent zipper. The bag has two small compartments and two additional compartments for documents or a laptop, as well as a reflective stripe. At the back there are two small belt loops to which the included carrying strap can be attached. Features: Material: Recycled polyester Attachment system: Ortlieb Quick Lock 2. Attachment option for carrying strap Tool-free adaptation to existing pannier rack Color: Black Dimensions: 35 x 25 x 11 cm (H x W x D) Weight: 600 grams Capacity: 10 liters Holds two A4 folders or a laptop up to 13 inches Designed and handmade in Berlin.
Reliable mud flap for e-bikes. Our E-BIKE LATZ mud flap prevents splashing rainwater from making your shoes, pant legs, or bike trailer wet and dirty while riding. Mudguards often don't drain away splashwater sufficiently, so the mud flap serves as an extension of the mudguard. This makes the ride to the office or your bike ride even more comfortable. Besides protecting your clothes while riding on wet roads, the E-BIKE LATZ also prevents flying stones from damaging the frame's paintwork. The mud flap is made from a truck tarpaulin and is attached to the lower section of the mudguard as an extension. Thanks to the reinforced material, the mud flap retains its shape even at higher speeds and in headwinds, making it ideal for use on e-bikes. The E-BIKE LATZ can be optionally mounted on mudguards with a width of 60-65 mm on the front or rear wheel. Note: Suitable for a mudguard width of 60-65 mm. Features: Bicycle mudguard extension made of truck tarpaulin Dimensionally stable, even at higher speeds Colour: black. Material: Truck tarpaulin. Reinforced and optimised for use at higher speeds Length: approx. 230 mm | Top width: 83 mm | Bottom width: 120 mm. Attachment to the mudguard stays: With cable ties (included) Weight: approx. 36 grams. Designed in Berlin Made in cooperation with workshops for people with disabilities. Scope of delivery: LATZ mud flap and 3 x cable ties. Assembly: Thread a cable tie from behind through the two holes on the left and right sides of the flap, so that the pointed ends are at the top and the lock is at the bottom. Now turn the mudguard over and position it in the middle of the lower end of the mudguard. Place the cable ties on the left and right sides of the mudguard stays and tighten them. Cut off the protruding ends of the cable ties with side cutters.
Universal protection specifically for e-bikes with fully integrated batteries. For a greater range on cool days. The AKKU COVER for integrated frame batteries offers optimal protection for your e-bike battery. Made of high-quality, elastic cellular rubber, the protective cover maintains the operating temperature on cool days, such as winter, and conforms perfectly to the shape of the battery. This reduces battery self-discharge, allowing you to achieve a greater range with your e-bike. This ensures even more riding enjoyment on your next bike ride, especially off-road. The cover is easily placed around the frame and fastened with high-quality industrial Velcro. Providing all-round protection, both the battery and the frame are protected from stone chips and damage. When the battery is removed from the frame, the protective cover covers the downtube. This keeps dirt and moisture away from the battery compartment and contacts. Tip: The battery should be stored at room temperature and only installed in the e-bike shortly before starting your ride. Benefits: Cold protection prevents lower capacity during the colder months. Protection from the elements Shock protection, scratch protection Elegant and slim design Features: Material: Laminated neoprene approx. 3 - 3.5 mm Using high-quality Velcro. Colour: Black. Dimensions: Top length: 54 cm, bottom length: 44, height: 33 cm Recommended circumference: Medium version 29 - 40 cm Fits most e-bikes with integrated downtube battery thanks to flexible neoprene. Designed in Berlin.
The protective cover for the Bosch A/P rear rack battery. The PowerPack Active/Performance Line 300/400/500 from BOSCH offers reliable support when climbing hills or riding through the city. The battery is constantly exposed to the elements. Riding on days with low temperatures, such as during the cold season, can reduce the range of the e-bike battery. Our protective cover extends the battery's lifespan on cool days while providing complete protection against dirt and stone chips. The simple and timeless protective cover is placed around the rear rack battery and secured with an industrial-grade hook-and-loop fastener. Made of high-quality, elastic neoprene, it is easy to install and conforms perfectly to the shape of the battery. The neoprene encloses the battery, ensuring a constant temperature, giving the e-bike a longer range even on cool days. The protective cover also serves as practical transport protection for the battery when it is removed from the frame. Tip: The battery should be stored at room temperature and only installed in the e-bike shortly before starting your journey. An additional accessory for transporting your e-bike on a vehicle's rear or roof rack is the motor cover. This protects the motor from driving rain and splashing water. Suitable for the BOSCH PowerPack Active/Performance Line rear rack battery. Features: Material: Padded neoprene (4.5 mm thick). Color: Black. Designed in Berlin and manufactured in the EU.
Protection for the Bosch PowerPack 725 The Bosch PowerPack 725 Smart System offers reliable support when climbing hills or riding through the city. During the cold season, low temperatures can reduce the range of your e-bike battery. Our AKKU-COVER extends battery performance on cool days while providing complete protection against dirt and stone chips. Made of high-quality, elastic neoprene, the protective cover is easy to install and conforms perfectly to the shape of the battery. Its simple and timeless design blends seamlessly into the bike's overall look. The neoprene helps maintain the battery's temperature, extending the e-bike's range even on cool days. The protective cover also serves as practical transport protection for the battery when it's removed from the frame. The lock, power button, and charge level indicator remain accessible through the recesses on the side of the cover. Tip: The battery should be stored at room temperature and only installed in the e-bike shortly before your journey. An additional accessory for transporting your e-bike on a vehicle's rear or roof rack is the motor cover, which protects it from driving rain and splashing water. Benefits: Protection from the cold prevents reduced performance during the colder months. Protection from the elements. Protection from impacts and scratches. Elegant and clever design. Features: Material: High-quality, 3 mm thick coated neoprene. Color: Black. Designed in Berlin.
Pannier Rack for BULLITT Cargo Bikes The BULLITT BAR is our new pannier rack, specially designed for BULLITT Cargo Bikes. Simply attach your pannier with the Ortlieb system or another system, and you're ready to go. The bag is secured in seconds and can no longer slip or fall off. The clearance between the cargo box and the Bullitt Bar is 36 cm, which means all standard backpacks and panniers can be attached. Features: Material and Color: Aluminum, black powder-coated Width: 160 mm Diameter: 10 mm Weight: 28 g
The FAHRER saddle cover is a waterproof and extremely robust product. With our saddle protector CAP (Kappe; German for "cover"), you not only get protection for your bicycle saddle but also a fashionable accessory. Made of durable nylon, the saddle cover is waterproof. Pulled over the saddle in seconds and secured with a drawstring, it stays in place even in windy conditions. When not in use, the saddle protector can be stored in a bag to save space or hidden under the saddle. The KAPPE is manufactured locally in collaboration with workshops for people with disabilities. Features: Protects the saddle from rain. Durable and waterproof. Material: Waterproof nylon. Max. saddle width: 17 cm. Designed and manufactured in Berlin with workshops for people with disabilities.
Extra-long mudguard for your bike. The LATZ XL reliably protects your bike trailer from splashing water. The LATZ XL mudguard prevents rainwater from getting wet and dirty when riding on wet roads. This protects even the smallest passengers or the trailer's cargo from dirty splashes. Our LATZ XL serves as an extension of the rear mudguard, as these often don't drain away splashes sufficiently. This makes your next purchase or bike ride even more comfortable. When riding without a trailer, the mudguard protects cyclists following behind from small stones and spray. The mudguard is made from truck tarpaulin. The reinforced material ensures that the LATZ XL retains its shape even at higher speeds and against headwinds. It is suitable for mounting on rear mudguards with a width of 40-55 mm. Features: Long mud flap version to protect the load of the bicycle trailer for mudguard widths of 45-65 mm Material: Truck tarpaulin Length: approx. 300 mm | Top width: 70 mm | Bottom width: 130 mm Available colours: black. Designed in Berlin Made in cooperation with workshops for people with disabilities. Scope of delivery: Mud flap LATZ XL and 3 x cable ties Assembly: Thread a cable tie from behind through the two holes on the left and right side of the flap, so that the pointed ends are at the top and the lock is at the bottom. Now turn the mudguard over and position it in the middle of the lower end of the mudguard. Place the cable ties on the left and right around the mudguard stays and pull them tight. Cut off the protruding ends of the cable ties with side cutters.
The protective cover fits SHIMANO STEPS frame batteries from the E5000, E6000, E6100, E7000, and E8000 series. The AKKU COVER for Shimano frame batteries offers optimal protection for your e-bike battery. Made of high-quality, elastic cellular rubber, the protective cover maintains the operating temperature on cool days, such as in winter, and conforms perfectly to the shape of the battery. This reduces battery self-discharge, giving you a greater range with your e-bike. This ensures even more riding enjoyment on your next bike ride. The cover is compatible with the following Shimano frame batteries: E5000, E6000, E6100, E7000, E8000, and comparable batteries with a circumference of up to 37 cm. The on/off button and charge level indicator remain accessible through cutouts in the protective cover. In addition to protection against the cold, the battery is effectively shielded from stone chips and damage. When the battery is removed from the frame, the protective cover serves as protection during transport. Benefits: Protection against the cold prevents reduced capacity during the colder months Protection from the elements Protection against shocks and scratches Elegant and smart design Features: Material: High-quality 4.5mm neoprene Color: Black. Designed in Berlin and manufactured in the EU.
The individual BAND for cycling. Its purpose: to prevent conflict between trouser leg and bike. The chain is always stronger, and in the best case, only oil traces reveal who won the battle. The family is enormous, and each member is unique. In the dark, they all reflect light—good for a long and busy life on the road. Features: - Limited edition - Material: recycled truck tarpaulin / boat hood / advertising banner - Length 47 cm, width 5 cm - Designed and handmade in Berlin.
