The Presa handlebar tape is three in one. It's soft,
sticky and durable.
The Presa handlebar tape is three in one. It's soft,
sticky and durable.
It's perfect for hard days, long days,
wet days. 210cm rolls per package and 30 mm
wide, while the thickness of 3 mm in the middle
fantastic seating comfort. The basic material is
made of EVA foam in different colors,
and is covered with black perforated sticky
polyurethane surface material.
Length: 210cm
Width: 30mm
Thickness: 3mm in the center
Weight: 85gr.
Including stickers
Mud Peak is an excellent seatpost with
two-point screw adjustment. The seatpost
together with the stem and handlebars is a
great finishing set for all mountain bikes
and e-bikes. The seatpost is made of 6061
aluminum and guarantees lightness and strength at
a very competitive price. Available in three
diameters 27.2, 30.9 and 31.6 mm with a
setback of 20 mm and a length of 400 mm
Cross seatpost with a setback of 25 mm.
180 gram ultra-light seatpost designed and
developed without compromises in terms of
reliability and strength. The 1-bolt
clamping system provides easy and
Quick installation. Fine adjustment of the saddle
slope is possible by adjusting the screw on the
Seatpost head. Compatible with oval carbon rails
(max. î 7x9.5 mm). Available in diameters of
27.2 mm and 31.6 mm and a length 400 mm.
Peak stem is made of 6061 aluminum, 3D
Forged. Available in a wide range of lengths
from 50 to 110 mm with an angle of 84 degrees
(-6 degrees). It has reversible images
those with a positive or negative 6 degree angle
can be mounted. The best way to protect your
find position on the bike.
Fork fit 1 1/8 - Handlebar diameter 31.7 mm
Peak stem is made of 6061 aluminum, 3D
Forged. Available in a wide range of lengths
from 50 to 110 mm with an angle of 84 degrees
(-6 degrees). It has reversible images
those with a positive or negative 6 degree angle
can be mounted. The best way to protect your
find position on the bike.
Fork fit 1 1/8 - Handlebar diameter 31.7 mm
Peak stem is made of 6061 aluminum, 3D
Forged. Available in a wide range of lengths
from 50 to 110 mm with an angle of 84 degrees
(-6 degrees). It has reversible images
those with a positive or negative 6 degree angle
can be mounted. The best way to protect your
find position on the bike.
Fork fit 1 1/8 - Handlebar diameter 31.7 mm
Peak stem is made of 6061 aluminum, 3D
Forged. Available in a wide range of lengths
from 50 to 110 mm with an angle of 84 degrees
(-6 degrees). It has reversible images
those with a positive or negative 6 degree angle
can be mounted. The best way to protect your
find position on the bike.
Fork fit 1 1/8 - Handlebar diameter 31.7 mm
Peak stem is made of 6061 aluminum, 3D
Forged. Available in a wide range of lengths
from 50 to 110 mm with an angle of 84 degrees
(-6 degrees). It has reversible images
those with a positive or negative 6 degree angle
can be mounted. The best way to protect your
find position on the bike.
Fork fit 1 1/8 - Handlebar diameter 31.7 mm
Cross team is a 70ø (-20ø) stem with a
aggressive flat design that fits any 29" or
27.5" bike. The Cross stem is the perfect choice
for people who are looking for the best
position. Made of 6061 aluminum with a
Solid 1-piece front panel. Available in sizes
from 60 to 90 mm and POB (polish on black)
finishing
Fork fit 1 1/8 - handlebar diameter 31.7 mm
Cross team is a 70ø (-20ø) stem with a
aggressive flat design that fits any 29" or
27.5" bike. The Cross stem is the perfect choice
for people who are looking for the best
position. Made of 6061 aluminum with a
Solid 1-piece front panel. Available in sizes
from 60 to 90 mm and POB (polish on black)
finishing
Fork fit 1 1/8 - handlebar diameter 31.7 mm
Cross team is a 70ø (-20ø) stem with a
aggressive flat design that fits any 29" or
27.5" bike. The Cross stem is the perfect choice
for people who are looking for the best
position. Made of 6061 aluminum with a
Solid 1-piece front panel. Available in sizes
from 60 to 90 mm and POB (polish on black)
finishing
Fork fit 1 1/8 - handlebar diameter 31.7 mm
Cross team is a 70ø (-20ø) stem with a
aggressive flat design that fits any 29" or
27.5" bike. The Cross stem is the perfect choice
for people who are looking for the best
position. Made of 6061 aluminum with a
Solid 1-piece front panel. Available in sizes
from 60 to 90 mm and POB (polish on black)
finishing
Fork fit 1 1/8 - handlebar diameter 31.7 mm
The Mud Cross series consists of super light
components for demanding riders. The Cross
stem is the perfect choice for people who
are looking for extreme lightness. Special
titanium screws and a redesigned
front plate brings the weight to the limit of
100 grams. Available in sizes 80 to
110 mm and POB (polish on black) finish.
Fork fit 1 1/8 - handlebar diameter 31.7 mm
The Mud Cross series consists of super light
components for demanding riders. The Cross
stem is the perfect choice for people who
are looking for extreme lightness. Special
titanium screws and a redesigned
front plate brings the weight to the limit of
100 grams. Available in sizes 80 to
110 mm and POB (polish on black) finish.
Fork fit 1 1/8 - handlebar diameter 31.7 mm
The Mud Peak line consists of components that
are suitable for use with mountain bikes and
e-bikes. The Peak riser handlebar is 780 mm wide.
and has a 20mm rise, an up-sweep of
9ø and a back sweep of 5ø for a more
upright position and comfortable riding position.
The perfect choice for e-bikes. The handlebar is
made of 6061 aluminum for 31.7mm stem clamp.
The Mud Peak line consists of components that
suitable for: MTB and e-bike use.
The Peak Flat handlebar is 780mm wide and has a
3 degree back sweep angle for more
control and stability of the bicycle. The handlebars
is made of 6061 aluminum for 31.7mm
stem clamp.
0ø up and 3ø back sweep
750mm flat carbon handlebar designed with a
0ø rise angle specifically for 27.5" and 29", for
who is looking for a low position. With a
3ø back sweep allows you to precisely control your cockpit
tuning for more control and stability of
the bicycle.
Handlebar diameter 31.7mm
0ø up and 3ø back sweep
The Superzero seatposts have recently been redesigned
Designed with a 25mm recoil and a
Ultra-lightweight. Thanks to the carbon monocoque
construction and a 1-bolt mounting system
for the saddle, the Superzero seatpost is a
perfect part of the highest level
for competitions. Compatible with oval
Carbon rail (Max. 7-9.5 mm). Available in
diameter 27.2 mm and 31.6 mm.
Setback 25mm
The Superzero seatposts have recently been redesigned
Designed with a 25mm recoil and a
Ultra-lightweight. Thanks to the carbon monocoque
construction and a 1-bolt mounting system
for the saddle, the Superzero seatpost is a
perfect part of the highest level
for competitions. Compatible with oval
Carbon rail (Max. 7-9.5 mm). Available in
diameter 27.2 mm and 31.6 mm.
Setback 25mm
The Vinci stem is the first Deda stem
designed with fully integrated
cable routing when mounting with Deda handlebars with
the DCR system (internal cable routing of
Deda). Vinci is the most versatile voice
on the market that is also compatible with a
traditional 1-1/8Ä steerer tube as well as 1-1/4Ä.
The DCR system works with a standard tap
tapered steerer tube with 1-1/8Ä top
diameter, but requires a top
52 mm (1.5Ä) headset bearing.
The voice leaves room at the back for the
to route the cables between the headset bearing and the
to fit the fork. The Vinci stem system
is equipped with special spacers that
form channels for the housing cables.
Spacers are designed with slots
which allows them to be pulled open,
they can be added or removed
to get the right fit without all the
no need to remove cables. The innovative
3D forging technology and the flat design
provide better aerodynamic performance.
The aero-integrated top cap, headset
spacers and aluminum sleeve adapter
for 1-1/8Ä steerer complete the range of
included accessories.
Available in POB (Polish on black) finish.
The Vinci stem is the first Deda stem
designed with fully integrated
cable routing when mounting with Deda handlebars with
the DCR system (internal cable routing of
Deda). Vinci is the most versatile voice
on the market that is also compatible with a
traditional 1-1/8Ä steerer tube as well as 1-1/4Ä.
The DCR system works with a standard tap
tapered steerer tube with 1-1/8Ä top
diameter, but requires a top
52 mm (1.5Ä) headset bearing.
The voice leaves room at the back for the
to route the cables between the headset bearing and the
to fit the fork. The Vinci stem system
is equipped with special spacers that
form channels for the housing cables.
Spacers are designed with slots
which allows them to be pulled open,
they can be added or removed
to get the right fit without all the
no need to remove cables. The innovative
3D forging technology and the flat design
provide better aerodynamic performance.
The aero-integrated top cap, headset
spacers and aluminum sleeve adapter
for 1-1/8Ä steerer complete the range of
included accessories.
Available in POB (Polish on black) finish.
The Vinci stem is the first Deda stem
designed with fully integrated
cable routing when mounting with Deda handlebars with
the DCR system (internal cable routing of
Deda). Vinci is the most versatile voice
on the market that is also compatible with a
traditional 1-1/8Ä steerer tube as well as 1-1/4Ä.
The DCR system works with a standard tap
tapered steerer tube with 1-1/8Ä top
diameter, but requires a top
52 mm (1.5Ä) headset bearing.
The voice leaves room at the back for the
to route the cables between the headset bearing and the
to fit the fork. The Vinci stem system
is equipped with special spacers that
form channels for the housing cables.
Spacers are designed with slots
which allows them to be pulled open,
they can be added or removed
to get the right fit without all the
no need to remove cables. The innovative
3D forging technology and the flat design
provide better aerodynamic performance.
The aero-integrated top cap, headset
spacers and aluminum sleeve adapter
for 1-1/8Ä steerer complete the range of
included accessories.
Available in POB (Polish on black) finish.
The Vinci stem is the first Deda stem
designed with fully integrated
cable routing when mounting with Deda handlebars with
the DCR system (internal cable routing of
Deda). Vinci is the most versatile voice
on the market that is also compatible with a
traditional 1-1/8Ä steerer tube as well as 1-1/4Ä.
The DCR system works with a standard tap
tapered steerer tube with 1-1/8Ä top
diameter, but requires a top
52 mm (1.5Ä) headset bearing.
The voice leaves room at the back for the
to route the cables between the headset bearing and the
to fit the fork. The Vinci stem system
is equipped with special spacers that
form channels for the housing cables.
Spacers are designed with slots
which allows them to be pulled open,
they can be added or removed
to get the right fit without all the
no need to remove cables. The innovative
3D forging technology and the flat design
provide better aerodynamic performance.
The aero-integrated top cap, headset
spacers and aluminum sleeve adapter
for 1-1/8Ä steerer complete the range of
included accessories.
Available in POB (Polish on black) finish.
The Vinci stem is the first Deda stem
designed with fully integrated
cable routing when mounting with Deda handlebars with
the DCR system (internal cable routing of
Deda). Vinci is the most versatile voice
on the market that is also compatible with a
traditional 1-1/8Ä steerer tube as well as 1-1/4Ä.
The DCR system works with a standard tap
tapered steerer tube with 1-1/8Ä top
diameter, but requires a top
52 mm (1.5Ä) headset bearing.
The voice leaves room at the back for the
to route the cables between the headset bearing and the
to fit the fork. The Vinci stem system
is equipped with special spacers that
form channels for the housing cables.
Spacers are designed with slots
which allows them to be pulled open,
they can be added or removed
to get the right fit without all the
no need to remove cables. The innovative
3D forging technology and the flat design
provide better aerodynamic performance.
The aero-integrated top cap, headset
spacers and aluminum sleeve adapter
for 1-1/8Ä steerer complete the range of
included accessories.
Available in POB (Polish on black) finish.
The Presa handlebar tape is three in one. It's soft,
sticky and durable.
The Presa handlebar tape is three in one. It is soft,
sticky and durable.
It's perfect for hard days, long days,
wet days. 210cm rolls per package and 30 mm
wide, while the thickness of 3 mm in the middle
fantastic seating comfort. The basic material is
made of EVA foam in different colors,
and is covered with black perforated sticky
polyurethane surface material.
Length: 210cm
Width: 30mm
Thickness: 3mm in the center
Weight: 85gr.
Including stickers
Mud Peak is an excellent seatpost with
two-point screw adjustment. The seatpost
together with the stem and handlebars is a
great finishing set for all mountain bikes
and e-bikes. The seatpost is made of 6061
aluminum and guarantees lightness and strength at
a very competitive price. Available in three
diameters 27.2, 30.9 and 31.6 mm with a
setback of 20 mm and a length of 400 mm
Mud Peak is an excellent seatpost with
two-point screw adjustment. The seatpost
together with the stem and handlebars is a
great finishing set for all mountain bikes
and e-bikes. The seatpost is made of 6061
aluminum and guarantees lightness and strength at
a very competitive price. Available in three
diameters 27.2, 30.9 and 31.6 mm with a
setback of 20 mm and a length of 400 mm
Cross seatpost with 0 mm setback. The minimum
and lightweight 2-bolt design ensures a
fine and easy saddle adjustment. The
unidirectional carbon tube provides strength and
Power. Compatible with oval carbon rails
(max. î 7x9.5 mm). Available in diameter
27.2 mm, 30.9 mm and 31.6 mm, length 400 mm.
Cross seatpost with 0 mm setback. The minimum
and lightweight 2-bolt design ensures a
fine and easy saddle adjustment. The
unidirectional carbon tube provides strength and
Power. Compatible with oval carbon rails
(max. î 7x9.5 mm). Available in diameter
27.2mm, 30.9mm and 31.6mm, length 400mm.
Cross seatpost with 0 mm setback. The minimum
and lightweight 2-bolt design ensures a
fine and easy saddle adjustment. The
unidirectional carbon tube provides strength and
Power. Compatible with oval carbon rails
(max. î 7x9.5 mm). Available in diameter
27.2 mm, 30.9 mm and 31.6 mm, length 400 mm.
Cross seatpost with a setback of 25 mm.
180 gram ultra-light seatpost designed and
developed without compromises in terms of
reliability and strength. The 1-bolt
clamping system provides easy and
Quick installation. Fine adjustment of the saddle
slope is possible by adjusting the screw on the
Seatpost head. Compatible with oval carbon rails
(max. î 7x9.5 mm). Available in diameters of
27.2 mm and 31.6 mm and a length 400 mm.
Peak stem is made of 6061 aluminum, 3D
Forged. Available in a wide range of lengths
from 50 to 110 mm with an angle of 84 degrees
(-6 degrees). It has reversible images
those with a positive or negative 6 degree angle
can be mounted. The best way to protect your
find position on the bike.
Fork fit 1 1/8 - Handlebar diameter 31.7 mm
Peak stem is made of 6061 aluminum, 3D
Forged. Available in a wide range of lengths
from 50 to 110 mm with an angle of 84 degrees
(-6 degrees). It has reversible images
those with a positive or negative 6 degree angle
can be mounted. The best way to protect your
find position on the bike.
Fork fit 1 1/8 - Handlebar diameter 31.7 mm
The Mud Cross series consists of super light
components for demanding riders. The Cross
stem is the perfect choice for people who
are looking for extreme lightness. Special
titanium screws and a redesigned
front plate brings the weight to the limit of
100 grams. Available in sizes 80 to
110 mm and POB (polish on black) finish.
Fork fit 1 1/8 - handlebar diameter 31.7 mm
The Mud Cross series consists of super light
components for demanding riders. The Cross
stem is the perfect choice for people who
are looking for extreme lightness. Special
titanium screws and a redesigned
front plate brings the weight to the limit of
100 grams. Available in sizes 80 to
110 mm and POB (polish on black) finish.
Fork fit 1 1/8 - handlebar diameter 31.7 mm
The Superzero seatposts have recently been redesigned
Designed with a 25mm recoil and a
Ultra-lightweight. Thanks to the carbon monocoque
construction and a 1-bolt mounting system
for the saddle, the Superzero seatpost is a
perfect part of the highest level
for competitions. Compatible with oval
Carbon rail (Max. 7-9.5 mm). Available in
diameter 27.2 mm and 31.6 mm.
Setback 25mm
Superleggero seatpost with 0 mm setback.
185gram ultra-light seatpost designed and
developed without compromises in terms of
reliability and strength. The 1-bolt
clamping system provides a simple and
quick installation. A fine adjustment of the
saddle tilt is possible via the adjustment screw on the
Seatpost head. Compatible with oval carbon rails
(max. î 7í9.5 mm). Available in diameter
27.2 mm and 31.6 mm on the seatpost head.
Compatible with oval carbon rail.
Superleggero seatpost with 0 mm setback.
185gram ultra-light seatpost designed and
developed without compromises in terms of
reliability and strength. The 1-bolt
clamping system provides a simple and
quick installation. A fine adjustment of the
saddle tilt is possible via the adjustment screw on the
Seatpost head. Compatible with oval carbon rails
(max. î 7í9.5 mm). Available in diameter
27.2 mm and 31.6 mm on the seatpost head.
Compatible with oval carbon rail.
Superleggero seatpost with 25 mm setback.
175 gram ultra-light seatpost designed and
developed without compromises in terms of
reliability and strength. The 1-bolt
clamping system provides easy and
Quick installation. Fine adjustment of the saddle
slope is possible by adjusting the screw on the
Seatpost head. Compatible with oval carbon rails
(Max û7x9,5 mm).
Available in diameters 27.2 mm and 31.6 mm.
Superleggero seatpost with 25 mm setback.
175 gram ultra-light seatpost designed and
developed without compromises in terms of
reliability and strength. The 1-bolt
clamping system provides easy and
Quick installation. Fine adjustment of the saddle
slope is possible by adjusting the screw on the
Seatpost head. Compatible with oval carbon rails
(Max û7x9,5 mm).
Available in diameters 27.2 mm and 31.6 mm.
