The LTX7A-BS motorcycle battery, 12 volts, 6 Ah, is a starter battery with AGM technology. The LTX7A-BS starter battery is dry pre-charged and comes standard with a suitable acid pack. This lead-acid battery is, after filling and charging, 100% maintenance-free and leak-proof. It can be mounted in a tilted position up to 45°. The LTX7A-BS is a true all-rounder and suitable for seasonal use and short distances. Technical specifications Volts (V) 12 Capacity (Ah) 6 (10hr) CCA (A/EN) 105 Length (mm) 150 Width (mm) 87 Height (mm) 93 Total height (mm) 93
The SLA 12-4S motorcycle battery, 12 volts, 5 Ah, is a starter battery with AGM technology. The SLA 12-4S is factory-activated (filled and charged) and therefore ready for immediate use upon delivery. This lead-acid battery is leak-proof and maintenance-free. It can be mounted in a tilted position up to 90°. The SLA 12-4S is a true all-rounder and suitable for seasonal use and short distances. Technical specifications Volt (V) 12 Capacity (Ah) 5 (10hr) CCA (A/EN) 50 Length (mm) 113 Width (mm) 70 Height (mm) 85 Total height (mm) 85
The LTX7A-4 motorcycle battery, 12 volts, 7 Ah, is a starter battery with gel technology. The LTX7A-4 starter battery is factory activated (filled and charged) and therefore immediately ready for use. This gel battery is 100% leak-proof and can be mounted in a tilted position up to 90°. The LTX7A-4 delivers more starting power than a conventional battery and is suitable for modern motorcycles and powersport vehicles. Technical specifications Volt (V) 12 Capacity (Ah) 7 (10hr) CCA (A/EN) 125 Length (mm) 150 Width (mm) 87 Height (mm) 94 Total height (mm) 94
The LTX7L-BS motorcycle battery, 12 volts, 6 Ah, is a starter battery with AGM technology. The LTX7L-BS starter battery is dry pre-charged and comes standard with a suitable acid pack. This lead-acid battery, after filling and charging, is 100% maintenance-free and leak-proof. It can be mounted in a tilted position up to 45°. The LTX7L-BS is a true all-rounder and suitable for seasonal use and short distances. Technical specifications: Voltage (V) 12, Capacity (Ah) 6 (10hr), CCA (A/EN) 100, Length (mm) 113, Width (mm) 70, Height (mm) 130, Total height (mm) 130
Protect valuables on every motorcycle trip with a waterproof dry bag, specially designed for motorcyclists. Whether it's an adventurous ride through rainy weather or a journey on dusty roads, this dry bag is guaranteed to keep your belongings dry and dust-free. Suitable for use in top cases and side cases, this inner bag offers protection for up to 25 liters of luggage. Thanks to the compression valve, excess air can be easily removed from the bag, keeping it compact and saving space. The convenient roll-top closure on both sides allows for quick and easy access to luggage. Waterproof inner bag / dry bag.
Keep valuable luggage dry in top and side cases, etc.
For 25 liters of luggage. air can easily be 'squeezed' out using a compression valve.
Convenient roll-top closure on both sides.
Material: 65% TPU / 35% Polyester
Dimensions: 81x38 cm
Color: Black
Protect valuables on every motorcycle trip with a waterproof dry bag, specially designed for motorcyclists. Whether it's an adventurous ride through rainy weather or a journey on dusty roads, this dry bag is guaranteed to keep your belongings dry and dust-free. Suitable for use in top cases and side cases, this inner bag offers protection for up to 10 liters of luggage. Thanks to the compression valve, excess air can be easily removed from the bag, keeping it compact and saving space. The convenient roll-top closure on both sides allows for quick and easy access to your luggage. Waterproof inner bag / dry bag.
Keep valuable luggage dry in top and side cases, etc.
For 10 liters of luggage. air can easily be 'squeezed' out using a compression valve.
Convenient roll-top closure on both sides.
Material: 65% TPU / 35% Polyester
Dimensions: 60x35 cm
Color: Black
The DS COVERS luggage bag is the indispensable companion for any motorcycle holiday. The reliable roll-top closure and heat-sealed seams keep items dry and clean, no matter how spectacular the ride. Thanks to the universal attachment system of strong hooks and elastic straps, the bag fits effortlessly on (almost) any motorcycle and stays securely in place. Once at your destination, the bag is super easy and comfortable to carry thanks to the handles and an adjustable shoulder strap. Made of durable tarpaulin (92% PVC and 8% polyester), the bag allows you to confidently embark on your next motorcycle adventure, time and again, regardless of the (weather) conditions. Handy and flexible luggage bag for every motorcycle adventure.
Space for 60 liters of luggage.
Waterproof (IP X5) thanks to sturdy roll-top closure and thermo-sealed seams.
Easy to attach to the back of (almost) any motorcycle.
Equipped with multiple strong hooks/eyes. With strong elastic binders (2 pcs.) for fastening.
Easy to carry thanks to handles and adjustable shoulder strap.
Material: 92% PVC / 8% Polyester
Weight: 1,240 grams
Dimensions: 55x32x52 cm
Color: Black
The ALFA Topcase motorcycle cover is specifically designed for larger motorcycles with a top case. This cover has the same specifications as the regular ALFA motorcycle cover, with the added benefit of extra space at the rear where the top case is located. This allows the top case to remain on the motorcycle when the cover is in use. The ALFA Topcase cover is available in sizes L, XL, and XXL. Aside from the provision for the top case, the other dimensions are the same as the regular ALFA motorcycle cover. License plate window: When parking your motorcycle/scooter in public spaces, you must ensure the license plate is visible. Failure to do so may result in a fine. The ALFA motorcycle cover is also available with a license plate window specifically for this purpose. We provide model-specific sizing recommendations for the brands listed below. If your motorcycle is not listed, you can follow the measuring instructions to determine the correct size. Aprilia | BMW | Ducati | Harley Davidson | Honda | KTM | Kawasaki | Suzuki | Triumph | Yamaha Measuring Instructions Determine the size of the motorcycle cover by measuring the length, width, and height of your motorcycle and comparing them to the dimensions in the table below. The correct size is a cover length that is approximately 5-10 cm greater than the motorcycle length. For good ventilation, we recommend always letting the cover reach approximately 10-20 cm above the ground. This allows air to enter the cover from below and escape through the ventilation openings at the top. If in doubt between two sizes, choose the larger of the two. Because the hem is elasticated, the cover always fits well. Length | Width | Front Height | Back Height Size L 229 cm 99 cm 135 cm 125 cm Size XL 246 cm 104 cm 137 cm 127 cm Size XXL 264 cm 105 cm 140 cm 130 cm
The ALFA Topcase motorcycle cover is specifically designed for larger motorcycles with a top case. This cover has the same specifications as the regular ALFA motorcycle cover, with the added benefit of extra space at the rear where the top case is located. This allows the top case to remain on the motorcycle when the cover is in use. The ALFA Topcase cover is available in sizes L, XL, and XXL. Aside from the provision for the top case, the other dimensions are the same as the regular ALFA motorcycle cover. License plate window: When parking your motorcycle/scooter in public spaces, you must ensure the license plate is visible. Failure to do so may result in a fine. The ALFA motorcycle cover is also available with a license plate window specifically for this purpose. We provide model-specific sizing recommendations for the brands listed below. If your motorcycle is not listed, you can follow the measuring instructions to determine the correct size. Aprilia | BMW | Ducati | Harley Davidson | Honda | KTM | Kawasaki | Suzuki | Triumph | Yamaha Measuring Instructions Determine the size of the motorcycle cover by measuring the length, width, and height of your motorcycle and comparing them to the dimensions in the table below. The correct size is a cover length that is approximately 5-10 cm greater than the motorcycle length. For good ventilation, we recommend always letting the cover reach approximately 10-20 cm above the ground. This allows air to enter the cover from below and escape through the ventilation openings at the top. If in doubt between two sizes, choose the larger of the two. Because the hem is elasticated, the cover always fits well. Length | Width | Front Height | Back Height Size L 229 cm 99 cm 135 cm 125 cm Size XL 246 cm 104 cm 137 cm 127 cm Size XXL 264 cm 105 cm 140 cm 130 cm
The Edge body kit, suitable for Yamaha Aerox and Nitro models up to 2014, offers owners the chance to give their scooter a fresh look. With nine pieces included, you can replace damaged parts and add aesthetic upgrades. Thanks to its high-quality construction, this kit fits precisely and provides a professional finish. Give your scooter a fresh look on the road with the Edge body kit. This kit includes the following nine pieces: Front mudguard
Side panel (Z-plate): left and right
Engine screen: left and right
Forefront
Lower front
Front handlebar cover
Counter house
Complete 5-piece fairing set suitable for Piaggio Zip-SP. This set fits both 2-stroke and 4-stroke models from 2000 onwards. It includes a Zip SP front fender. This set includes the following parts: Forefront
Front mudguard
Side screens in one piece
Steering cover
Front grille on top
Complete 5-piece fairing set suitable for Piaggio Zip-SP. This set fits both 2-stroke and 4-stroke models from 2000 onwards. It includes a Zip SP front fender. This set includes the following parts: Forefront Front mudguard
Side screens in one piece
Steering cover
Front grille on top
Complete 5-piece fairing set suitable for Piaggio Zip-SP. This set fits both 2-stroke and 4-stroke models from 2000 onwards. It includes a Zip SP front fender. This set includes the following parts: Forefront
Front mudguard
Side screens in one piece
Steering cover
Front grille on top
Complete 5-piece fairing set suitable for Piaggio Zip-SP. This set fits both 2-stroke and 4-stroke models from 2000 onwards. It includes a Zip SP front fender. This set includes the following parts: Forefront
Front mudguard
Side screens in one piece
Steering cover
Front grille on top
Complete 5-piece fairing set suitable for Piaggio Zip-SP. This set fits both 2-stroke and 4-stroke models from 2000 onwards. It includes a Zip SP front fender. This set includes the following parts: Forefront
Front mudguard
Side screens in one piece
Steering cover
Front grille on top
The Gilera Runner body panel replacement kit, manufactured between 08 and 2005, is specifically designed to replace the exterior panels of the Gilera Runner scooter. The kit consists of high-quality panels that are easy to install. It's an ideal solution for repairing damaged or worn body panels. This kit includes various panels specifically designed for Gilera Runner models manufactured between 2005 and 2008. The following is a description of the parts included in the kit: Front mudguard
Front cover - Middle
Front cover - Left
Front cover - Right
Steering cover
Counter face
Radiator front grille - Left
Radiator front grille - Right
Side panel - Left
Side screen - Right
Rear cover between rear fenders
Duo handle
Battery cover
Right running board
Running Board Left This set fits the following models:
Gilera Runner 50 (until Bj. 1999)
Gilera Runner 50 (1999 - 2000)
Gilera Runner 50 (2004 - 08/2005) Gilera Runner Cat 50 (2001 - 2004)
Gilera Runner Purejet 50 (up to 08/2005) It's important to note that the availability of specific plates in the set may vary depending on the Gilera Runner model and version. It's recommended to purchase the set from a reputable supplier who specifically states that the plates are suitable for models up to and including 08/2005. This ensures a perfect fit for your specific scooter.
The Gilera Runner body panel replacement kit, manufactured between 08 and 2005, is specifically designed to replace the exterior panels of the Gilera Runner scooter. The kit consists of high-quality panels that are easy to install. It's an ideal solution for repairing damaged or worn body panels. This kit includes various panels specifically designed for Gilera Runner models manufactured between 2005 and 2008. The following is a description of the parts included in the kit: Front mudguard
Front cover - Middle
Front cover - Left
Front cover - Right
Steering cover
Counter face
Radiator front grille - Left
Radiator front grille - Right
Side panel - Left
Side screen - Right
Rear cover between rear fenders
Duo handle
Battery cover
Right running board
Running Board Left This set fits the following models:
Gilera Runner 50 (until Bj. 1999)
Gilera Runner 50 (1999 - 2000)
Gilera Runner 50 (2004 - 08/2005) Gilera Runner Cat 50 (2001 - 2004)
Gilera Runner Purejet 50 (up to 08/2005) It's important to note that the availability of specific plates in the set may vary depending on the Gilera Runner model and version. It's recommended to purchase the set from a reputable supplier who specifically states that the plates are suitable for models up to and including 08/2005. This ensures a perfect fit for your specific scooter.
The Gilera Runner body panel replacement kit, manufactured between 08 and 2005, is specifically designed to replace the exterior panels of the Gilera Runner scooter. The kit consists of high-quality panels that are easy to install. It's an ideal solution for repairing damaged or worn body panels. This kit includes various panels specifically designed for Gilera Runner models manufactured between 2005 and 2008. The following is a description of the parts included in the kit: Front mudguard
Front cover - Middle
Front cover - Left
Front cover - Right
Steering cover
Counter face
Radiator front grille - Left
Radiator front grille - Right
Side panel - Left
Side screen - Right
Rear cover between rear fenders
Duo handle
Battery cover
Right running board
Running Board Left This set fits the following models:
Gilera Runner 50 (until Bj. 1999)
Gilera Runner 50 (1999 - 2000)
Gilera Runner 50 (2004 - 08/2005) Gilera Runner Cat 50 (2001 - 2004)
Gilera Runner Purejet 50 (up to 08/2005) It's important to note that the availability of specific plates in the set may vary depending on the Gilera Runner model and version. It's recommended to purchase the set from a reputable supplier who specifically states that the plates are suitable for models up to and including 08/2005. This ensures a perfect fit for your specific scooter.
The Gilera Runner body panel replacement kit, manufactured between 08 and 2005, is specifically designed to replace the exterior panels of the Gilera Runner scooter. The kit consists of high-quality panels that are easy to install. It's an ideal solution for repairing damaged or worn body panels. This kit includes various panels specifically designed for Gilera Runner models manufactured between 2005 and 2008. The following is a description of the parts included in the kit: Front mudguard
Front cover - Middle
Front cover - Left
Front cover - Right
Steering cover
Counter face
Radiator front grille - Left
Radiator front grille - Right
Side panel - Left
Side screen - Right
Rear cover between rear fenders
Duo handle
Battery cover
Right running board
Running Board Left This set fits the following models:
Gilera Runner 50 (until Bj. 1999)
Gilera Runner 50 (1999 - 2000)
Gilera Runner 50 (2004 - 08/2005) Gilera Runner Cat 50 (2001 - 2004)
Gilera Runner Purejet 50 (up to 08/2005) It's important to note that the availability of specific plates in the set may vary depending on the Gilera Runner model and version. It's recommended to purchase the set from a reputable supplier who specifically states that the plates are suitable for models up to and including 08/2005. This ensures a perfect fit for your specific scooter.
The Gilera Runner body panel replacement kit, manufactured between 08 and 2005, is specifically designed to replace the exterior panels of the Gilera Runner scooter. The kit consists of high-quality panels that are easy to install. It's an ideal solution for repairing damaged or worn body panels. This kit includes various panels specifically designed for Gilera Runner models manufactured between 2005 and 2008. The following is a description of the parts included in the kit: Front mudguard
Front cover - Middle
Front cover - Left
Front cover - Right
Steering cover
Counter face
Radiator front grille - Left
Radiator front grille - Right
Side panel - Left
Side screen - Right
Rear cover between rear fenders
Duo handle
Battery cover
Right running board
Running Board Left This set fits the following models:
Gilera Runner 50 (until Bj. 1999)
Gilera Runner 50 (1999 - 2000)
Gilera Runner 50 (2004 - 08/2005) Gilera Runner Cat 50 (2001 - 2004)
Gilera Runner Purejet 50 (up to 08/2005) It's important to note that the availability of specific plates in the set may vary depending on the Gilera Runner model and version. It's recommended to purchase the set from a reputable supplier who specifically states that the plates are suitable for models up to and including 08/2005. This ensures a perfect fit for your specific scooter.
The Gilera Runner body panel replacement kit, manufactured between 08 and 2005, is specifically designed to replace the exterior panels of the Gilera Runner scooter. The kit consists of high-quality panels that are easy to install. It's an ideal solution for repairing damaged or worn body panels. This kit includes various panels specifically designed for Gilera Runner models manufactured between 2005 and 2008. The following is a description of the parts included in the kit: Front mudguard
Front cover - Middle
Front cover - Left
Front cover - Right
Steering cover
Counter face
Radiator front grille - Left
Radiator front grille - Right
Side panel - Left
Side screen - Right
Rear cover between rear fenders
Duo handle
Battery cover
Right running board
Running Board Left This set fits the following models: Gilera Runner 50 (until Bj. 1999)
Gilera Runner 50 (1999 - 2000)
Gilera Runner 50 (2004 - 08/2005)
Gilera Runner Cat 50 (2001 - 2004)
Gilera Runner Purejet 50 (up to 08/2005) It's important to note that the availability of specific plates in the set may vary depending on the Gilera Runner model and version. It's recommended to purchase the set from a reputable supplier who specifically states that the plates are suitable for models up to and including 08/2005. This ensures a perfect fit for your specific scooter.
Complete 7-piece hood set in white . Fits the following models: MRT Enduro 50 2T (2009 to 2017)
MRT Enduro 50 2T (from 2018)
MRT PRO Enduro 50 2T (2009 to 2017)
MRT PRO SM 50 2T (2009 to 2017)
MRT SM 50 2T (2009 to 2017)
MRT SM 50 2T (from 2018)
The 14-piece Peugeot Speedfight body panel replacement kit is a package specifically designed to replace the exterior panels of the Speedfight scooter. This kit includes several panels in multiple colors, giving you the opportunity to customize the look of your scooter. Below is a description of the parts included in the kit: Front cowl: This is the panel that covers the front of the scooter, including the headlight and dashboard. It is often considered the face of the scooter. Side guards: These panels cover the sides of the scooter and run from front to rear. They contribute to the scooter's aerodynamics and protect internal components. Rear cowl: This is the panel that covers the rear of the scooter and protects the taillights and rear wheel. Front mudguard: This is the panel located above the front wheel and protects against mud and water splashed by the wheel. Rear mudguard: This is the panel located above the rear wheel and also protects against mud and water. Seat cover: This is the plate that covers the seat and protects the scooter's seating area. Fuel tank cover: This is the plate that covers the fuel tank and protects it from damage. This kit includes plates in multiple colors, giving you the option to match your scooter's color scheme or replace damaged ones. It's a handy solution if you want to update the look of your Peugeot Speedfight. It's recommended to install according to the manufacturer's instructions or with the help of an experienced technician to ensure a perfect fit and finish.
Complete 9-piece fairing set for the Peugeot New Vivacity. A striking design with a perfect fit. This Edge fairing set for a Peugeot New Vivacity allows you to create a striking yet stylish design. It's also virtually indistinguishable from the original fairing set for a Peugeot New Vivacity. This set fits both 2-stroke and 4-stroke models. This set consists of the following 9 pieces: Steering cover
Forefront
Front mudguard
Side panel left
Side panel right
Protective cover for
Bottom screen left
Bottom screen right
Rear screen
Please note, battery is supplied without battery acid. Brand: Edge Voltage: 6 Volt Capacity (Ah) 2 Ampere Type 6N4-2A-7 Suitable for the following models: Honda MB / Honda MT
The set consists of: - Front mudguard - Front fairing - Front fairing cover - Lower fairings left & right - Engine fairings left & right - Rear fairings left & right - Intermediate rear fairing - Lower front fairings left & right
The set consists of: -Front screen upper left & right -Screen between headlights -Side panels between turn signal and footboard left & right -Under spoiler left & right -Rear side panel left & right -Intermediate panels left & right -Front fender -Cover above taillight.
Diameter 26x1.5mm This product is suitable for the following models: MBK Club 50 AIR 2T '91-'03 MBK Dakota 50 AIR 2T '04-'08 MBK Evasion 50 AIR 2T '88-'99 MBK Hard Rock 50 AIR 2T '91-'02 MBK Kansas 50 AIR 2T '04-'08 MBK Magmun 50 H2O 2T '88-'93 MBK Magmun Racing 50 H2O 2T '89-'95 MBK Magmun Racing XR 50 H2O 2T '96-'03 MBK Passion 50 H2O 2T '88-'99 MBK Phenix 50 AIR 2T '04-'08 MBK Rock 50 AIR 2T '87-'89
Battery supplied ready for use. This product is suitable for the following models: Honda Bali SJ 50 AIR 2T '92-'01 (Honda Dio 50 AIR 2T '94-'04 Honda Dio ZX 50 AIR 2T '94-'04 Honda Scoopy 50 AIR 2T '96-'01 Honda SFX 50 AIR 2T '95-'01 Honda SH 50 AIR 2T '96-'01 Honda SXR Baja 50 AIR 2T '98-'99 Honda SXR Dak 50 AIR 2T '98-'99 Honda X8R-S 50 AIR 2T '98-'01 Honda X8R-X 50 AIR 2T '98-'01 Suzuki Adress 2T (1993) Suzuki Katana 50 2T 97 04 Suzuki Zillion 50 2T 99 99 Suzuki Streetmagic
Complete 5-piece fairing set suitable for Piaggio Zip-SP. This set fits both the 2-stroke and 4-stroke models from year 2000 onwards. This set features a Zip SP front panel. This set consists of the following parts: Front panel Front fender Side panels (one piece) Handlebar cover Front panel grille at the top
The Edge fairing kit, suitable for Yamaha Aerox and MBK Nitro models up to 2014, offers owners the opportunity to give their scooter a fresh look. With nine parts included, both damaged parts can be replaced and aesthetic upgrades can be performed. Thanks to its high-quality construction, this kit fits precisely and provides a professional result. Give your scooter a new look on the road with the Edge fairing kit. This kit consists of the following 9 parts: Front fender Side panel (Z-plate): left and right Engine panel: left and right Front panel Lower front panel Handlebar cover front Meter housing Underbody
Maximum protection against rain, dust, UV and frost. Ventilation against condensation.
Lock rings to prevent theft.
Elastic hem for perfect fit.
Adjustable strap with click closure to prevent flying.
Double-stitched seams for long life.
100% waterproof and dustproof.
Material: 300D polyester.
Heat resistant up to 170C°.
Comes in a handy storage bag.
Suitable for scooter with windshield Size: Medium. 190*85*150*80cm (Length/Width/Front Height / Back Height) Measuring Instructions Determine the size of the cover by measuring the length, width, and height of your scooter. If in doubt between two sizes, choose the larger of the two. Because the hem is elastic, the cover always fits well.
Complete 5-piece fairing set suitable for Piaggio Zip-SP. This set fits both 2-stroke and 4-stroke models from 2000 onwards. It includes a Zip SP front fender. This set includes the following parts: Forefront
Front mudguard
Side screens in one piece
Steering cover
Front grille on top
Complete 5-piece fairing set suitable for Piaggio Zip-SP. This set fits both 2-stroke and 4-stroke models from 2000 onwards. It includes a Zip SP front fender. This set includes the following parts: Forefront
Front mudguard
Side screens in one piece
Steering cover
Front grille on top
The Gilera Runner body panel replacement kit, manufactured between 08 and 2005, is specifically designed to replace the exterior panels of the Gilera Runner scooter. The kit consists of high-quality panels that are easy to install. It's an ideal solution for repairing damaged or worn body panels. This kit includes various panels specifically designed for Gilera Runner models manufactured between 2005 and 2008. The following is a description of the parts included in the kit: Front mudguard
Front cover - Middle
Front cover - Left
Front cover - Right
Steering cover
Counter face
Radiator front grille - Left
Radiator front grille - Right
Side panel - Left
Side screen - Right
Rear cover between rear fenders
Duo handle
Battery cover
Right running board
Running Board Left This set fits the following models:
Gilera Runner 50 (until Bj. 1999)
Gilera Runner 50 (1999 - 2000)
Gilera Runner 50 (2004 - 08/2005) Gilera Runner Cat 50 (2001 - 2004)
Gilera Runner Purejet 50 (up to 08/2005) It's important to note that the availability of specific plates in the set may vary depending on the Gilera Runner model and version. It's recommended to purchase the set from a reputable supplier who specifically states that the plates are suitable for models up to and including 08/2005. This ensures a perfect fit for your specific scooter.
The Gilera Runner body panel replacement kit, manufactured between 08 and 2005, is specifically designed to replace the exterior panels of the Gilera Runner scooter. The kit consists of high-quality panels that are easy to install. It's an ideal solution for repairing damaged or worn body panels. This kit includes various panels specifically designed for Gilera Runner models manufactured between 2005 and 2008. The following is a description of the parts included in the kit: Front mudguard
Front cover - Middle
Front cover - Left
Front cover - Right
Steering cover
Counter face
Radiator front grille - Left
Radiator front grille - Right
Side panel - Left
Side screen - Right
Rear cover between rear fenders
Duo handle
Battery cover
Right running board
Running Board Left This set fits the following models:
Gilera Runner 50 (until Bj. 1999)
Gilera Runner 50 (1999 - 2000)
Gilera Runner 50 (2004 - 08/2005) Gilera Runner Cat 50 (2001 - 2004)
Gilera Runner Purejet 50 (up to 08/2005) It's important to note that the availability of specific plates in the set may vary depending on the Gilera Runner model and version. It's recommended to purchase the set from a reputable supplier who specifically states that the plates are suitable for models up to and including 08/2005. This ensures a perfect fit for your specific scooter.
This complete 10-piece fairing set from EDGE is specifically designed for the Sym Mio scooter and comes in various colors. The set offers the same quality and fit as the original Sym Mio fairing set, but is considerably more affordable. The set is compatible with both Sym Mio 2-stroke and 4-stroke models and includes the following components: Front mudguard
Steering cover
Left lower fairing spoiler, positioned under the running board and connecting to the lower front fender Right lower fairing spoiler, also under the running board with connection to the lower front fender
Left side shield, which runs along the bottom of the saddle
Right side panel, positioned identically to the left side panel
Upper front fender, which is attached around the headlight
Lower front fender, through which the front fork extends and connects to the lower spoiler
Left front fender cover, located below the turn signals and between the upper and lower front fenders
Right front fender cowl, similarly positioned as the left cowl. Note: This set only includes the painted outer cowl parts. Inner cowl parts such as the running board and leg shield are not included and must be purchased separately if necessary. Original stickers and mounting hardware such as self-tapping screws and speed nuts are not included. Additional logos for the handlebar cowl and side skirts are available separately, which can be a nice addition.
