Cable for testing 36V Cortina,
Bikkel and Venturelli batteries. With this cable part
can e-bike batteries be tested from
Cortina Ecomo, Bikkel Bikes and Venurelli.
Bosch Activator Active & Performance
Accessory cable
Adapter for testing 36V Bosch Active &
Performance batteries. The adapter ensures that
the battery remains active and can be tested. Bosch
Active & Performance batteries (300W, 400W,
500W) are used in various e-bikes:
Sparta, Kreidler, Ghos, Koga, Batavus, Faler,
Hercules, Merida, Bergamont, Cannondale,
Centurion, Haibike, Scott, Victoria, Trek.
Models from 2014 onwards. An adapter cable
AT00038 is required! This is included with the
Delivery of a Battery Tester. The adapter cable
Can also be ordered separately. Instructions:
1. Connect the adapter using the adapter cable
AT00038 to the battery tester.
2. Slide the adapter into the battery.
3. Press the button on the battery to turn it on.
to change gear
4. Start the battery tester and follow the instructions.
Please note: The USB connection on the adapter is
intended for a possible firmware update
of the adapter. DO NOT connect it! If incorrect
Use may cause damage!
Bosch Activator Classic
Accessory cable
Adapter for testing 36V Bosch
Classic batteries of 300Wh, 400Wh and
500Wh. The adapter ensures that the battery
remains active and can be tested.The Bosch
Classic batteries are available on various e-bike brands
present: Sparta, Kreidler, Ghos, Koga,
Batavus, Falter, Hercules, Merida,
Bergamont, Cannondale, Centurion, Haibike,
Flyer, Scott, Victoria, Trek etc. Models
2010 - 2013 and Classic models 2014.
Battery placement for both models
luggage carrier as on the frame. An adapter
Cable AT00038 is required! This is included.
with the delivery of a Battery Tester. The
adapter cable can also be ordered separately
become. Instructions: 1. Connect the adapter
using the adapter cable AT00038 to the
battery tester. 2. Slide the adapter into the
battery. 3. Press the button on the battery to
to enable this. 4. Start the
Battery tester and follow the instructions. Note:
The USB connection on the adapter is intended
for a possible firmware update of the
adapter. DO NOT connect this! If incorrect
Use may cause damage!
bronze, silver, gold, platinum
Adapter for Panasonic 36V battery. Gazelle (platinum,
gold, silver, bronze). Luggage carrier battery. Suitable
for e-bike batteries with an Imulse mid-motor with
the name Hybrid Mid Impulse. Suitable for the
following models:
Gazelle Orange C8 Hybrid M,
Gazelle Orange C7 Hybrid M.
An adapter cable AT00038 is required! This is
included in the delivery of a Battery Tester.
The adapter cable can also be ordered separately
The new generation Panasonic SIB is suitable for
for Flyer.
An adapter cable AT00038 is required! This is
included in the delivery of a Battery Tester.
The adapter cable can also be ordered separately.
Contents:
- Battery tester
- Plug-in power supply 12Vdc
- Test cable
- USB interface cable
- Thermal printing paper
- Operating instructions
Universal Battery Tester for easy testing
of, among others, Lead, NiCd, NiMH, Lion batteries between the
6V - 48V (min3V - max60V).
Comes with universal test cable (item
AT00039), adapter cable (item AT00038)
(adapters to be ordered separately), power cable,
USB cable, cash register paper, Battery tester PC
Software Program, automatic firmware
updates. Included in the delivery of a Battery Tester is
a universal test cable included. With this
test cable can already test many different batteries
are tested on which voltage can be applied
measured. Batteries where voltage can be measured.
can therefore in principle be measured with a
so-called 'dumb' connection such as the
supplied universal cable part must be tested.
This can be done with the crocodile clips on the + and
the - of the battery to be tested is connected.
For the most common battery systems there is a
'Plug & Play' cable developed so that this
can be easily connected to the battery.
In addition to Plug & Play cables and adapters
we also develop SMART cable parts /
adapters. A SMART cable part / adapter is a
requirement to be able to discharge a battery
(example Bosch, Yamaha). The adapter cable
is included. This is universal and
to connect to different adapters (adapters
must therefore be ordered separately).
Battery Tester PC program works on all
Windows versions (not Mac). If the
Battery tester is connected to a PC which
has access to the internet, can click on
the Batterytester logo in the Software
Program firmware updates are
performed. Battery tester is the most
comprehensive tester in the market: The tester can
test most different batteries in the sense of
lead, Lion, NiMH etc. but also the widest
bandwidth (min3V - max60V). For what
Regarding 12V lead batteries, the following applies:
restrictions to the maximum amperage
with which these can be taxed.
Battery tester automatically detects the
voltage. So you don't need to enter any voltage.
setting the battery to be tested. Fully charged battery
connect and start with 1 push of a button
automatic program that charges the battery with
a varying load against resistance is
tested. At the end of the test, a
receipt can be printed on the tester itself or a
A4 test report showing the capacity
and resistance when connected to a PC or
laptop. The computer software for the
Battery Tester can also be downloaded via
http://flamec.nl/ftp/nl/publish.htm
Adapter Smart Impulse, Derby Cycle 1.0 - 2.0 (not
for EVO, EVO RS). Impulse batteries are used under
other used in bicycles from Derby Cycle,
Kalkhoff, Raleigh, Gazelle, Rixe, Bulls and Focus.
An adapter cable AT00038 is required! This is
included in the delivery of a Battery Tester.
The adapter cable can also be ordered separately
Babboe Rear Light Spanninga Pixeo XB Switch Battery is a rear light for bicycles.For rear mounting.
Brand: Spanninga
Product type: Rear light
Model: Solo XD
Gross weight: 0.03 kg
Net weight: 0.03 kg
BASIL DOWNTUBE ELECTRIC CAP FOR SHIMANO STEPS/YAMAHA, neoprene cover to protect the battery connection when the Shimano Steps/Yamaha battery is removed from the bike, 4.5 mm thick neoprene, black lime
Charges and maintains 6V-12V STD, AGM, GEL lead-acid batteries and 12V LiFePO4 batteries. 1A charging current with battery capacity up to 20Ah (maintains all sizes). 4 charging modes. Easy to set up and use: connect, select a charging mode and let it charge. Easy-to-read LED display. Fully protected against short circuits, incorrect connections, overcharging and overheating. IP6X
Smart charger and maintainer for 6V-12V lead-acid batteries (GEL, AGM, MF, DRY, Ca/Ca, WET) and 12V LiFePO4 batteries, charging current 1A with battery capacity up to 20Ah. 4 easy-to-adjust and use charging modes, easy-to-read LED display. Fully protected against short circuits, connection errors, overcharging, and overheating, it comes with clamps and a set of eyelet terminals.
Benefits of SHIDO DC 1.0 chargers:Clear distinction between lithium and lead-acid charging modes.Improved algorithm for both Lithium and lead-acid modes.Battery recovery for deeply discharged batteries.Battery status check after charging.Maintenance mode, with voltage checks every 4 hours.Protected against reverse polarity, overcharge, overcurrent, overheating, and short circuit.User-friendly detection for reverse polarity, flat or damaged batteries.IP 65, waterproof.Adapts to varying A/C voltage and provides consistent charging current.https://www.afam.com/nl/elektriciteit/shido_chargers_dc1-0_dc4-0/ for instructions. 12v/1A
The AXA Classic is a standard LED battery headlamp with a light output of 4 lux, suitable for retro bikes and granny bikes. Easy to use thanks to the convenient push-button switch and easy battery changes. See 15 meters, be seen 1000 meters. Includes 3 AAA batteries. Up to 50 hours of battery life.
Axa rear light City rear on/off, luggage carrier rear light, Works on 2 AAA Alkaline batteries, Mounting at center distance 50 mm / 80 mm, on card, 2 x AAA batteries, 50 h, on/off
The AXA Juno Battery is a very compact rear light. Its clever design also illuminates the Juno from the sides, making you more visible to approaching traffic. Battery life: 50 hours. This light has an auto-off function, which means it automatically switches off after 5 minutes. The mounting distance is 50 mm.
Axa rear light Nyx works on 2x AAA batteries that last 70 hours, low indicator, auto-off function that automatically switches off the light after 5 minutes of standing still, mudguard mounting.
The Shimano EC-E6002 charger is specifically designed for charging Shimano STEPS e-bike batteries. With an output voltage of 42V and a charging current of 1.8A, this charger ensures a safe and efficient charging session. Its compact and lightweight design makes it easy to carry and practical to use, both at home and on the go. Features: Suitable for Shimano STEPS lithium-ion batteries
Output voltage: 42V DC
Charging current: approx. 1.8A
Compact and lightweight (approx. 530 grams)
Charging time 418Wh battery: approx. 6.5 hours (80% in 3.5 hours)
Charging time 504Wh battery: approx. 7.5 hours (80% in 4 hours)
Possibility of charging with the battery mounted on the bicycle The Shimano EC-E6002 is the reliable choice for those who use their e-bike daily and can always rely on a fully charged battery.
The Qwic 36V 2A Inter charger is specifically designed for Qwic electric bicycles with a 36V battery and a 3-pin charging connector. This charger is ideal as a replacement for your original charger or as an extra charger for use at work, on holiday, or in the shed. Its compact design and lightweight make it easy to take with you. Key features: Compatible with Qwic e-bikes with 36V batteries and 3-pin Inter connection
Charging current: 2 Ampere - ensures a safe and reliable charging speed
Easy operation: plug and play, no additional settings required LED indication: red while charging, green when the battery is fully charged
Compact and lightweight: easy to carry
EAN: 8718792031301 Technical specifications:
Input: 100-240V, 50/60Hz
Output: 42V DC, 2A
Connection: 3-pin Inter plug
Cable length: approx. 1.5 meters
Color: black Suitable for, among others: Qwic Premium, Qwic Performance and Qwic Urban models with 36V battery and 3-pin connection. Qwic Premium i MN7 Qwic Premium iMN7+ Qwic Premium i MD9 Qwic Premium i MN7+ Belt Qwic Urban FN7 Qwic Urban FN7 Lite Qwic Urban R1 Qwic Urban RD9 With this original Qwic 36V 2A Inter battery charger you can extend the lifespan of your battery and you are assured of safe and efficient charging. Perfect as a replacement or second charger, so you can always hit the road fully charged.
Shimano Steps - Battery Charger - Plug Type C for Europe. Designed for charging your SHIMANO STEPS battery without removing it from your e-bike, the EC-E8004-1 charger offers fast charge times and a small connector. It can also charge the battery directly using an adapter. Lightweight and portable . Same compact size and weight as EC-E6002 Fast charging
Fast charge from half to 80% in 1 hour
Charge from empty to 80% in 2.5 hours
Charge from empty to fully charged in 4.5 hours Equivalent to or higher than Water Resistance Class 5 (IPX5) Product Specifications:
Model: EC-E8004-1
Series: SHIMANO STEPS E8000 Series
Color: Standard
Example country/region: Europe
Compatible battery: BT-E6000, BT-E6001, BT-E6010, BT-E8010, BT-E8014, BT-E8016, BT-E8020, BT-E8035, BT-E8035-L, BT-E8036
Compatible voltage: 100 V - 240 V AC, 50 - 60 Hz
CE standard Full charge time (hours): 4 (* 4.5)
Time to charge to 80% (hours): 2.5 (* 3.2)
Plug-in charging type
Charging temperature: 0 - 40 °C
Storage temperature: -20 - 60 °C
Error signal: Yes
Built-in AC cord
Built-in AC cord length: 2 meters
Plug type: Type C
Van Beijck e-bike charger for charging lithium-ion batteries. The charger has a clear LED charge indicator. Van Beijck chargers feature a standard 4-step (smart) charging characteristic. This allows e-bike batteries to be charged more efficiently than with standard chargers. A 4-step charger switches itself off when the maximum charge capacity is reached. A battery discharges very slowly, meaning the voltage will drop very slowly. The smart charger will automatically start trickle charging again when the battery reaches 75%, keeping your battery moving and in good condition. Product Specifications : Dimensions: 167mm x 69mm x 40mm
Battery material: ABS plastic
Cooling: Passive Mains voltage: 110V - 240V
Output voltage: 42V
Maximum charging current standard: 2.0A
Battery capacity: 7 - 30Ah
Charging characteristic: 4 stages Winter charger
Li-Ion battery: Yes
Lead battery: Yes
Charging plug: 5.5x2.5mm
Van Beijck e-bike charger for charging lithium-ion batteries. The charger has a clear LED charge indicator. Van Beijck chargers feature a standard 4-step (smart) charging characteristic. This allows e-bike batteries to be charged more efficiently than with standard chargers. A 4-step charger switches itself off when the maximum charge capacity is reached. A battery discharges very slowly, meaning the voltage will drop very gradually. The smart charger will automatically start trickle charging again when the battery reaches 75%, keeping your battery moving and in good condition. SPARTA: - Avantgarde 2014 2015 - Double i 2016 - Double-E 2015 - Entree i 2016 - F7i 2016 Sparta F8i 2016 - F8iRT 2016 - ION RX plus RT 2015 - ION RX+ 2014 2015 - ION RX+ prestige 2014 - ION RXS 2014 2015 - ION RXS+ 2014 2015 - M8i 2016 Sparta R10i 2016 - ION Entree RX 2015 BATAVUS: - Adagio Easy 2014 2015 - Legato Easy 2015 2016 - Mont Blanc easy 2014 2016 - Tourmalet E-go 2016 Koga - E-deluxe 2014 2016 - E-deluxe lady 2014 2016 - E-extension 2014 2016 - E-extension lady 2014 2016 - E-Special 2015 2016 - E-special lady 2015 2016 - E-tour 2015 2016 - E-tour lady 2015 2016 - E-xtension 2014 2015 Specifications Dimensions: 170 x 70 x 38 mm
Material: ABS plastic
Cooling: Passive
Output voltage: 42.0V
Maximum charging current: 2A
Charging characteristic: 4 stages
Application: Lithium-ion (Li-ion)
Charging plug: 4-pin XLR BSC42002000
Van Beijck 36V smart charger (Model 4 pins XLR charging plug) replacement charger for model SSLC084V42XH Suitable for Oa Qwic 36V Li-Ion batteries. 4 pin XLR Qwic charger is supplied in our own housing and this charger is also equipped with smart charging technology, First check the connection plug diagram (See photo 3) before ordering. This charger can also optionally be ordered as a 4A fast charger. Van Beijck battery - battery charger for charging Oa Qwic Li-Ion battery battery 36 volt electric bicycle. The charger has a clear LED charging indication. Van Beijck chargers have a 4-step (Winter charger) charging characteristic as standard. This ensures that batteries are charged better than with conventional chargers. This battery charger is used for Oa Qwic electric bicycles Product Specifications: Dimensions: 167mm x 69mm x 40mm
Battery material: ABS plastic
Cooling: Passive
Mains voltage: 110V - 240V
Output voltage: 42V
Maximum charging current: 2.0A
Battery capacity: 7 - 20Ah Charging characteristic: 4 stages Winter charger
Li-Ion battery: Yes
Charging plug: 4 pin XLR
This EDGE light is equipped with LEDs. Ideal for everyday use and of high quality. Edge Vida rear fender light - 1 LED - batteries included (on card). Edge lighting LED. Edge Vida rear mudguard light - 1 LED - including batteries (on card) Popular Edge rear fender light, equipped with a single powerful LED and reflector. This rear rack light comes with two AAA batteries. Specifications: 1 LED With on/off switch Suitable for fender mounting Includes 2 AAA batteries Packaged on a blister card
This SMART lighting is designed for reliability and ease of use. Smart GEM battery rear light. Smart lighting. Rear light Smart GEM battery Discover the Power of Safety with the Smart GEM Rear Light. Increase your visibility and safety during your rides with the Smart Rear Light Model GEM. This innovative rear light not only offers a powerful 7-lumen beam, but also a sleek and stylish design that gives your bike a modern look. Why the Smart Rear Light Model GEM? Powerful Lighting: With 7 lumens, the GEM rear light provides bright and sharp light, so you are always clearly visible to other road users, even in the darkest conditions. Easy Installation: Thanks to the sturdy rubber mounting strap, you can mount the light to your seatpost or luggage carrier in no time. The flexible strap ensures a firm and secure attachment without tools. Long-Lasting Battery: The Smart Rear Light uses CR2032 batteries that guarantee long-lasting use. These batteries are easy to replace, so you will never unexpectedly be without light. Compact and Lightweight: The compact design makes the GEM rear light ideal for any bike. Its light weight ensures no extra ballast while benefiting from maximum visibility. Invest in your safety and that of others. With the Smart Rear Light Model GEM, you choose reliable and efficient lighting that helps you hit the road more safely and with confidence. Order today and experience the difference that high-quality lighting can make! Product specifications: Practical micro flash: 16 grams, with high light output Easy attachment to the bike, stroller strap with silicone band 18 - 32 mm LED: Nichia eXtreme 2.0 Waterproof CR2032 Switch on and off: with 2 clicks Brightness: up to 12 Lm 3 functions: - FLASH: 11 LM up to 35 hours - PULSE (dimming): 12 LM up to 6.5 hours - STEADY (lighting): 12 LM from 4.5 hours Light on, visible from all sides
The adapter cable is used for the connection
with adapters that must be ordered separately
The adapter cable is supplied as standard with a
Battery tester.
PC 12-03 Lithium battery charger 12 volt and 3 amp. This battery charger is specially designed to charge lithium batteries. This is the ideal charger for 7.5 Ah, 12 Ah and 20 Ah lithium batteries. The charger automatically switches off after the battery is fully charged. PLEASE NOTE! This is a battery charger for lithium batteries, so it is not suitable for lead-acid, AGM, GEL etc. Features: Lithium battery charger For 12 volt lithium batteries For batteries from 6 to 20 ah Suitable for Lithium batteries NOT for lead-acid, AGM, GEL etc. Easy operation Cable with 2 clamps
The fender-mounted Retro is specially developed for retro and classic bicycles. A strong mix of the classic mounting method and a modern look. The Retro is easy to operate with a push button and is available with a red casing. Light: 500 meters visibility Safety 1 high power LED, more than 50,000 hours lifespan Comfort Easy to operate push button Choice of a white or red casing Technology Battery operated Battery life 70 hours Includes 2 AAA LR03 batteries
This Van Beijck charger is the replacement for the Tranzx MDA 11542002000 5-pin XLR model. This charger is controlled by an MCU and can charge all types of lithium and lead batteries. TranzX Li-Ion 4-stage Van Beijck battery charger (replacement for the CH02 5-pin plug model) (This charger is only suitable for 36V Li-Ion TranzX batteries) 5-pin Tranzx model MDA 11542002000 charger is supplied in a Van Beijck housing and this charger is also equipped with smart charging technology. The charger is suitable for charging TranzX BL03, BL05, BL06, and BL07 batteries for electric bicycles, among others. The charger has a clear LED charging indicator. VanBeijck chargers typically have a 4-stage (Winter charger) charging characteristic. This results in better battery charging than with conventional chargers. This charger is used for Sachs - Winora - Victoria - Hercules - Staiger - Pegasus and Panther bicycles, among others. The product may differ from the photo; the technical specifications will always be the same. Technical specifications: Dimensions: 170mm x 70mm x 38mm Battery material: ABS Plastic Cooling: Passive Mains voltage: 110 - 230V Output voltage: 42V Maximum charging current: 4.0A Battery capacity: 7 - 20Ah Charging characteristic: 4 stages Li-Ion: Yes Charging plug: 5 Pin XLR Neutrik Suitable for: TranzX Li-Ion batteries
LED taillight specially designed for city, trekking and hybrid bikes. A battery-powered taillight for fender mounting. Equipped with a light sensor. Functions: 1 red LED for a bright light output and a light tunnel ensure visibility, even on both sides of the bike. Modern and innovative design. Integrated ON/AUTO/OFF switch on the back. Light output at an angle of 220 degrees or more, for optimal safety. Battery indicator. Technical information: Housing o The back is made of impact-resistant ABS. o The front is made of PMMA, with an integrated red reflector. o Splash and rain resistant. Seal ring. A rubber seal ring placed between both lamp housing parts, around the fender bolt, and around the screw connecting the two lamp parts, prevents splash or rainwater from entering. Stainless steel mounting material o 1 x M5 x 12mm bolts o 1 x washer o 1 x M5 lock nuts o 1 x M3 x 30mm screw (Phillips head) Auto "ON" function The taillight (when in "AUTO" mode) automatically turns on when the light sensor is activated (i.e., when it's dark) and the bike is in motion! Auto "OFF" function The taillight automatically turns off after 4 minutes of standstill in "AUTO" mode. Switch. Easy-to-operate AUTO/ON/OFF push-button switch, made of TPE (Thermo-Plastic-Elastomer), on the back of the taillight. By pressing the push-button once, the light, after flashing 3 times, enters "AUTO" mode. Pressing again puts the light in "ON" mode, and pressing once more turns the light "OFF". Batteries o Includes 2 x pre-assembled AAA alkaline or rechargeable batteries. o A plastic locking strip protects the battery from accidental power loss. Battery indicator. Looking at the taillight from the rear of the bike, a battery indicator is located on the right side of the taillight, which lights up yellow when activated. Replace or recharge the batteries as soon as possible after the battery indicator is activated. Burn time Up to 60 hours (depending on battery condition and ambient temperature). Reflectors. A reflector integrated into the lamp housing. Dimensions 48 x 65 x 40mm (width x height x thickness). Weight 65 gr (including batteries). Standards o Complies with CE standards. o The complete taillight is approved according to German "StVZO" (K 1326). (approval procedure in progress) o The reflector ("Z") complies with German "StVZO" standards and is approved according to ECE-R3 (IA-E1-024515). (approval procedure in progress) IMPORTANT: When the taillight is used with 2 rechargeable batteries (NiMH 1.2 Volt type and at least 600mAH each), it may be used on all bicycles according to German StVZO regulations. If the taillight is used with 2 alkaline batteries (1.5 Volt each), this taillight may only be used on racing bicycles with a total weight of max. 11 kilograms or as an additional (second) taillight on all bicycles, according to German StVZO regulations.
Stella bikes are widely distributed and popular in the Netherlands. It can happen that a charger stops working or breaks down, even with these bikes. We supply a replacement Stella charger of type 2, which has a 5-pin charging connector. This Stella charger has a charging speed of 2 amps, which means you can charge 2 amps per hour into your battery. Product specifications: Dimensions: 170 x 70 x 38 mm Material: ABS plastic Cooling: Passive Output voltage: 42.0V Maximum charging current: 2.0A Charging characteristic: 4 stages Application: Lithium-ion (Li-ion) Charging plug: 5-pin round plug Article number: 21119
