Luggage carrier 36V:
Giant Twist Go Power models up to and including 2014
Giant Twist Lite 1 models up to 2014.
Gaint Twist Lite Power models up to and including 2014.
Gaint Twist Lite CS models up to and including 2014.
Giant Twist Mio models up to and including 2014.
Gaint Twist Mio Coaster models up to and including 2014.
Giant Twist Aspiro models up to 2014.
Luggage carrier 26V:
The following models between 2008 - 2012:
Giant Twist Comfort CS
Giant Twist Elegance CS
Giant Twist Express CS
Giant Twist Sport CS
Giant Twist Comfort CS
Giant Twist Freedom CS
Giant Twist Lite Single
Giant Twist Go Single
Giant Twist Go Double
Gaint Twist 1.1
Frame: 36V:
Giant Twist Power models 2011 to 2014.
Gaint Twist Esprit Power models 2011 and later.
Gaint Aspiro Hybrid models 2011 to 2014.
Giant Twist Go Double Power models 2011 to 2014
Various Giant Ease models
Giant uses the term for this type of battery:
EnergyPack Li-ion 400Wh, 36V side carrier.
NB!
Not suitable for Giant 36V luggage carrier battery,
Giant Aspiro, Giant Prime and Giant Ease
models from 2014 and for Giant Aspiro
models, battery Giant Prime models
0.a. E+O, E+1, E+2, E+3.
Adapter for 36V E-Motion batteries.
First generation E-motion:
Sparta E-Motion C1: Models 2011 to 2013
Sparta E-Motion C2: Models 2010 to 2013
Sparta E-Motion C3: Models 2011 to 2012
Sparta E-Motion CS2: Models 2011 to 2012
Sparta Country Tour Electric: Models 2011 to 2013
Sparta Pick-up electric: Models 2011 to 2012
Sparta Amazone 4 life: Models 2012 to 2013
Sparta E-Motion C2 model 2014 to 2015
Sparta E-Motion C3 model 2013 to 2015
Second generation E-Motion:
Sparta E-Motion C4 model 2012 to 2015
Sparta E-Motion CS4 model 2012,
Sparta E-Motion C5 model 2014 to 2015,
Sparta Elegance model 2014 to 2015,
Sparta lola Jo E model 2015,
Sparta Mojo E model 2014 to 2015,
Sparta Original E model 2015,
Sparta Pick Up E model 2014 to 2015,
Sparta Amazone E model 2014 to 2015,
Sparta Country Tour E model 2014 to 2015,
Batavus Allegro E-go model 2014 to 2015,
Batavus E-Blockbuster model 2015,
Batavus Genova E-go model 2015
Batavus Monaco E-go model 2014 to 2015,
Batavus Stratos E-go model 2014 to 2015,
Batbus Torino E-go model 2014 to 2015.
An adapter cable AT00038 is required! This
is included in the delivery of a
Battery tester. The adapter cable can also
must be ordered separately.
Gazelle bicycles with the Innergy and Innergy XT
drive system. Cable is suitable for, among other things,
following models: Gazelle Orange Innergy,
Gazelle Medeo Innergy, Gazelle Chamonix Innergy,
Gazelle Fuente Innergy, Gazelle Balance Innergy,
Gazelle Miss Grace Innergy.
Cable for 36V batteries Gazelle Innergy.
Gazelle bicycles with the Innergy and Innergy
XT drive system. Cable is suitable for
including the following models: Gazelle Orange
Innergy, Gazelle Medeo Innergy, Gazelle
Chamonix Innergy, Gazelle Fuente Innergy,
Gazelle Balance Innergy, Gazelle Miss
Grace Innergy. Instructions:
1. Connect the cable to the battery (see photo) and to
the battery tester
2. Press the button (rear light) on the battery to
to activate this.
3. Start the battery tester and follow the instructions.
NB :
Some battery types switch off prematurely
with an error (the rear light is flashing). Follow
then follow the procedure below:
1. Let the battery rest for at least 1 hour.
2. Press the button (rear light) on the battery to
to activate this.
3. Select the "Resume test" option
4. Set the current to 1A.
Cable for testing 36V Cortina,
Bikkel and Venturelli batteries. With this cable part
can e-bike batteries be tested from
Cortina Ecomo, Bikkel Bikes and Venurelli.
Bosch Activator Active & Performance
Accessory cable
Adapter for testing 36V Bosch Active &
Performance batteries. The adapter ensures that
the battery remains active and can be tested. Bosch
Active & Performance batteries (300W, 400W,
500W) are used in various e-bikes:
Sparta, Kreidler, Ghos, Koga, Batavus, Faler,
Hercules, Merida, Bergamont, Cannondale,
Centurion, Haibike, Scott, Victoria, Trek.
Models from 2014 onwards. An adapter cable
AT00038 is required! This is included with the
Delivery of a Battery Tester. The adapter cable
Can also be ordered separately. Instructions:
1. Connect the adapter using the adapter cable
AT00038 to the battery tester.
2. Slide the adapter into the battery.
3. Press the button on the battery to turn it on.
to change gear
4. Start the battery tester and follow the instructions.
Please note: The USB connection on the adapter is
intended for a possible firmware update
of the adapter. DO NOT connect it! If incorrect
Use may cause damage!
Bosch Activator Classic
Accessory cable
Adapter for testing 36V Bosch
Classic batteries of 300Wh, 400Wh and
500Wh. The adapter ensures that the battery
remains active and can be tested.The Bosch
Classic batteries are available on various e-bike brands
present: Sparta, Kreidler, Ghos, Koga,
Batavus, Falter, Hercules, Merida,
Bergamont, Cannondale, Centurion, Haibike,
Flyer, Scott, Victoria, Trek etc. Models
2010 - 2013 and Classic models 2014.
Battery placement for both models
luggage carrier as on the frame. An adapter
Cable AT00038 is required! This is included.
with the delivery of a Battery Tester. The
adapter cable can also be ordered separately
become. Instructions: 1. Connect the adapter
using the adapter cable AT00038 to the
battery tester. 2. Slide the adapter into the
battery. 3. Press the button on the battery to
to enable this. 4. Start the
Battery tester and follow the instructions. Note:
The USB connection on the adapter is intended
for a possible firmware update of the
adapter. DO NOT connect this! If incorrect
Use may cause damage!
bronze, silver, gold, platinum
Adapter for Panasonic 36V battery. Gazelle (platinum,
gold, silver, bronze). Luggage carrier battery. Suitable
for e-bike batteries with an Imulse mid-motor with
the name Hybrid Mid Impulse. Suitable for the
following models:
Gazelle Orange C8 Hybrid M,
Gazelle Orange C7 Hybrid M.
An adapter cable AT00038 is required! This is
included in the delivery of a Battery Tester.
The adapter cable can also be ordered separately
The new generation Panasonic SIB is suitable for
for Flyer.
An adapter cable AT00038 is required! This is
included in the delivery of a Battery Tester.
The adapter cable can also be ordered separately.
Contents:
- Battery tester
- Plug-in power supply 12Vdc
- Test cable
- USB interface cable
- Thermal printing paper
- Operating instructions
Universal Battery Tester for easy testing
of, among others, Lead, NiCd, NiMH, Lion batteries between the
6V - 48V (min3V - max60V).
Comes with universal test cable (item
AT00039), adapter cable (item AT00038)
(adapters to be ordered separately), power cable,
USB cable, cash register paper, Battery tester PC
Software Program, automatic firmware
updates. Included in the delivery of a Battery Tester is
a universal test cable included. With this
test cable can already test many different batteries
are tested on which voltage can be applied
measured. Batteries where voltage can be measured.
can therefore in principle be measured with a
so-called 'dumb' connection such as the
supplied universal cable part must be tested.
This can be done with the crocodile clips on the + and
the - of the battery to be tested is connected.
For the most common battery systems there is a
'Plug & Play' cable developed so that this
can be easily connected to the battery.
In addition to Plug & Play cables and adapters
we also develop SMART cable parts /
adapters. A SMART cable part / adapter is a
requirement to be able to discharge a battery
(example Bosch, Yamaha). The adapter cable
is included. This is universal and
to connect to different adapters (adapters
must therefore be ordered separately).
Battery Tester PC program works on all
Windows versions (not Mac). If the
Battery tester is connected to a PC which
has access to the internet, can click on
the Batterytester logo in the Software
Program firmware updates are
performed. Battery tester is the most
comprehensive tester in the market: The tester can
test most different batteries in the sense of
lead, Lion, NiMH etc. but also the widest
bandwidth (min3V - max60V). For what
Regarding 12V lead batteries, the following applies:
restrictions to the maximum amperage
with which these can be taxed.
Battery tester automatically detects the
voltage. So you don't need to enter any voltage.
setting the battery to be tested. Fully charged battery
connect and start with 1 push of a button
automatic program that charges the battery with
a varying load against resistance is
tested. At the end of the test, a
receipt can be printed on the tester itself or a
A4 test report showing the capacity
and resistance when connected to a PC or
laptop. The computer software for the
Battery Tester can also be downloaded via
http://flamec.nl/ftp/nl/publish.htm
Adapter Smart Impulse, Derby Cycle 1.0 - 2.0 (not
for EVO, EVO RS). Impulse batteries are used under
other used in bicycles from Derby Cycle,
Kalkhoff, Raleigh, Gazelle, Rixe, Bulls and Focus.
An adapter cable AT00038 is required! This is
included in the delivery of a Battery Tester.
The adapter cable can also be ordered separately
Babboe Rear Light Spanninga Pixeo XB Switch Battery is a rear light for bicycles.For rear mounting.
Brand: Spanninga
Product type: Rear light
Model: Solo XD
Gross weight: 0.03 kg
Net weight: 0.03 kg
BASIL DOWNTUBE ELECTRIC CAP FOR SHIMANO STEPS/YAMAHA, neoprene cover to protect the battery connection when the Shimano Steps/Yamaha battery is removed from the bike, 4.5 mm thick neoprene, black lime
Charges and maintains 6V-12V STD, AGM, GEL lead-acid batteries and 12V LiFePO4 batteries. 1A charging current with battery capacity up to 20Ah (maintains all sizes). 4 charging modes. Easy to set up and use: connect, select a charging mode and let it charge. Easy-to-read LED display. Fully protected against short circuits, incorrect connections, overcharging and overheating. IP6X
Smart charger and maintainer for 6V-12V lead-acid batteries (GEL, AGM, MF, DRY, Ca/Ca, WET) and 12V LiFePO4 batteries, charging current 1A with battery capacity up to 20Ah. 4 easy-to-adjust and use charging modes, easy-to-read LED display. Fully protected against short circuits, connection errors, overcharging, and overheating, it comes with clamps and a set of eyelet terminals.
Benefits of SHIDO DC 1.0 chargers:Clear distinction between lithium and lead-acid charging modes.Improved algorithm for both Lithium and lead-acid modes.Battery recovery for deeply discharged batteries.Battery status check after charging.Maintenance mode, with voltage checks every 4 hours.Protected against reverse polarity, overcharge, overcurrent, overheating, and short circuit.User-friendly detection for reverse polarity, flat or damaged batteries.IP 65, waterproof.Adapts to varying A/C voltage and provides consistent charging current.https://www.afam.com/nl/elektriciteit/shido_chargers_dc1-0_dc4-0/ for instructions. 12v/1A
The AXA Classic is a standard LED battery headlamp with a light output of 4 lux, suitable for retro bikes and granny bikes. Easy to use thanks to the convenient push-button switch and easy battery changes. See 15 meters, be seen 1000 meters. Includes 3 AAA batteries. Up to 50 hours of battery life.
Axa rear light City rear on/off, luggage carrier rear light, Works on 2 AAA Alkaline batteries, Mounting at center distance 50 mm / 80 mm, on card, 2 x AAA batteries, 50 h, on/off
The AXA Juno Battery is a very compact rear light. Its clever design also illuminates the Juno from the sides, making you more visible to approaching traffic. Battery life: 50 hours. This light has an auto-off function, which means it automatically switches off after 5 minutes. The mounting distance is 50 mm.
Axa rear light Nyx works on 2x AAA batteries that last 70 hours, low indicator, auto-off function that automatically switches off the light after 5 minutes of standing still, mudguard mounting.
The Shimano EC-E6002 charger is specifically designed for charging Shimano STEPS e-bike batteries. With an output voltage of 42V and a charging current of 1.8A, this charger ensures a safe and efficient charging session. Its compact and lightweight design makes it easy to carry and practical to use, both at home and on the go. Features: Suitable for Shimano STEPS lithium-ion batteries
Output voltage: 42V DC
Charging current: approx. 1.8A
Compact and lightweight (approx. 530 grams)
Charging time 418Wh battery: approx. 6.5 hours (80% in 3.5 hours)
Charging time 504Wh battery: approx. 7.5 hours (80% in 4 hours)
Possibility of charging with the battery mounted on the bicycle The Shimano EC-E6002 is the reliable choice for those who use their e-bike daily and can always rely on a fully charged battery.
The Qwic 36V 2A Inter charger is specifically designed for Qwic electric bicycles with a 36V battery and a 3-pin charging connector. This charger is ideal as a replacement for your original charger or as an extra charger for use at work, on holiday, or in the shed. Its compact design and lightweight make it easy to take with you. Key features: Compatible with Qwic e-bikes with 36V batteries and 3-pin Inter connection
Charging current: 2 Ampere - ensures a safe and reliable charging speed
Easy operation: plug and play, no additional settings required LED indication: red while charging, green when the battery is fully charged
Compact and lightweight: easy to carry
EAN: 8718792031301 Technical specifications:
Input: 100-240V, 50/60Hz
Output: 42V DC, 2A
Connection: 3-pin Inter plug
Cable length: approx. 1.5 meters
Color: black Suitable for, among others: Qwic Premium, Qwic Performance and Qwic Urban models with 36V battery and 3-pin connection. Qwic Premium i MN7 Qwic Premium iMN7+ Qwic Premium i MD9 Qwic Premium i MN7+ Belt Qwic Urban FN7 Qwic Urban FN7 Lite Qwic Urban R1 Qwic Urban RD9 With this original Qwic 36V 2A Inter battery charger you can extend the lifespan of your battery and you are assured of safe and efficient charging. Perfect as a replacement or second charger, so you can always hit the road fully charged.
