Waterproof dual USB charger with smart chip that recognizes the connected device and delivers the appropriate power for a safe and fast charge. protection against short circuit, overtemperature, overload, overcurrent. IP68 waterproof due to ultrasonic sealing and protective membranes on the inputs. Ultra Fast Charge - 5400 mA - input 12/24V (30W) Screw or 3M adhesive mounting (included). Wired with hardwire fork terminals (wire 150 cm)
Double waterproof USB and ultrasonic seal to charge the device in all weather conditions (fully waterproof with or without cap). Attachment by means of screws, mounting base or by anti-scratch rubber adapter that can be cut to size. Integrated chip to automatically detect the device's charging protocol (BC 1.2, MTK PE 2.0, FCP, Qualcomm) and optimize charging speed. 5400Ma
Benefits of SHIDO DC 1.0 chargers:Clear distinction between lithium and lead-acid charging modes.Improved algorithm for both Lithium and lead-acid modes.Battery recovery for deeply discharged batteries.Battery status check after charging.Maintenance mode, with voltage checks every 4 hours.Protected against reverse polarity, overcharge, overcurrent, overheating, and short circuit.User-friendly detection for reverse polarity, flat or damaged batteries.IP 65, waterproof.Adapts to varying A/C voltage and provides consistent charging current.https://www.afam.com/nl/elektriciteit/shido_chargers_dc1-0_dc4-0/ for instructions. 12v/1A
Universal USB charging set. This charging set consists of a fixed connection set for the battery, and a coupled connection set with USB output to charge all devices that have a USB connection. A cable gland has been installed in the E04, E22, SL12, SL20, SL23, SL35 and SC25 through which the cable of this USB charger can be fed, allowing you to charge any desired device with a USB input during your ride.
Cortina introduces the Cortina Venice battery charger holder, a functional and socially responsible product made from recycled felt. No more cable clutter in your shed or garage, but a tidy feeling because your battery charger has a fixed and organized spot. With this holder, you can easily hang your charger on the wall and quickly and easily connect your bike to it after a bike ride. The Cortina Venice is a universal product and therefore suitable for all types of battery chargers. The Cortina Venice battery charger holder was created in collaboration with I-Did. I-Did makes new products from recycled felt, sourced from textile surpluses that would otherwise be burned or landfilled. This work is done by people distanced from the labor market. You'll recognize the discarded uniforms from organizations like the Ministry of Defence, IKEA, De Efteling, and KLM. Efteling company clothing has been used for the Cortina Venice – a nice detail!Product dimensions: W: 12 cm x H: 27 cmMaximum dimensions of the battery charger: W: 10.5 cm x H: 20 cm
Our charger is specifically designed to charge your UTO battery. The kit is easy to use and includes a charger with a European plug. This charger is only suitable for UTO models with a UART battery. These are the battery models (located on the back of the seatpost): EQ3607B, EQ3610C, and EQ3614B.
Starter set 2 x GBA 12 V 2.0 Ah batteries + GAL 12 V-40 Professional charger: 2 x 12-volt batteries with 2.0 Ah and a quick charger. The batteries are compatible with all 12-volt tools. The charger charges the battery in 45 minutes. The batteries are lightweight for even more comfortable work.
Bohlt charger 42V 1.5A. Suitable for scooter models: 9TD/TD10/9PRO/10PRO/9AIR/10AIR. For the 9PRO, this only applies if the serial number begins with 2021.
The Shimano EC-E6002 charger is specifically designed for charging Shimano STEPS e-bike batteries. With an output voltage of 42V and a charging current of 1.8A, this charger ensures a safe and efficient charging session. Its compact and lightweight design makes it easy to carry and practical to use, both at home and on the go. Features: Suitable for Shimano STEPS lithium-ion batteries
Output voltage: 42V DC
Charging current: approx. 1.8A
Compact and lightweight (approx. 530 grams)
Charging time 418Wh battery: approx. 6.5 hours (80% in 3.5 hours)
Charging time 504Wh battery: approx. 7.5 hours (80% in 4 hours)
Possibility of charging with the battery mounted on the bicycle The Shimano EC-E6002 is the reliable choice for those who use their e-bike daily and can always rely on a fully charged battery.
The Qwic 36V 2A Inter charger is specifically designed for Qwic electric bicycles with a 36V battery and a 3-pin charging connector. This charger is ideal as a replacement for your original charger or as an extra charger for use at work, on holiday, or in the shed. Its compact design and lightweight make it easy to take with you. Key features: Compatible with Qwic e-bikes with 36V batteries and 3-pin Inter connection
Charging current: 2 Ampere - ensures a safe and reliable charging speed
Easy operation: plug and play, no additional settings required LED indication: red while charging, green when the battery is fully charged
Compact and lightweight: easy to carry
EAN: 8718792031301 Technical specifications:
Input: 100-240V, 50/60Hz
Output: 42V DC, 2A
Connection: 3-pin Inter plug
Cable length: approx. 1.5 meters
Color: black Suitable for, among others: Qwic Premium, Qwic Performance and Qwic Urban models with 36V battery and 3-pin connection. Qwic Premium i MN7 Qwic Premium iMN7+ Qwic Premium i MD9 Qwic Premium i MN7+ Belt Qwic Urban FN7 Qwic Urban FN7 Lite Qwic Urban R1 Qwic Urban RD9 With this original Qwic 36V 2A Inter battery charger you can extend the lifespan of your battery and you are assured of safe and efficient charging. Perfect as a replacement or second charger, so you can always hit the road fully charged.
Shimano Steps - Battery Charger - Plug Type C for Europe. Designed for charging your SHIMANO STEPS battery without removing it from your e-bike, the EC-E8004-1 charger offers fast charge times and a small connector. It can also charge the battery directly using an adapter. Lightweight and portable . Same compact size and weight as EC-E6002 Fast charging
Fast charge from half to 80% in 1 hour
Charge from empty to 80% in 2.5 hours
Charge from empty to fully charged in 4.5 hours Equivalent to or higher than Water Resistance Class 5 (IPX5) Product Specifications:
Model: EC-E8004-1
Series: SHIMANO STEPS E8000 Series
Color: Standard
Example country/region: Europe
Compatible battery: BT-E6000, BT-E6001, BT-E6010, BT-E8010, BT-E8014, BT-E8016, BT-E8020, BT-E8035, BT-E8035-L, BT-E8036
Compatible voltage: 100 V - 240 V AC, 50 - 60 Hz
CE standard Full charge time (hours): 4 (* 4.5)
Time to charge to 80% (hours): 2.5 (* 3.2)
Plug-in charging type
Charging temperature: 0 - 40 °C
Storage temperature: -20 - 60 °C
Error signal: Yes
Built-in AC cord
Built-in AC cord length: 2 meters
Plug type: Type C
Van Beijck e-bike charger for charging lithium-ion batteries. The charger has a clear LED charge indicator. Van Beijck chargers feature a standard 4-step (smart) charging characteristic. This allows e-bike batteries to be charged more efficiently than with standard chargers. A 4-step charger switches itself off when the maximum charge capacity is reached. A battery discharges very slowly, meaning the voltage will drop very slowly. The smart charger will automatically start trickle charging again when the battery reaches 75%, keeping your battery moving and in good condition. Product Specifications : Dimensions: 167mm x 69mm x 40mm
Battery material: ABS plastic
Cooling: Passive Mains voltage: 110V - 240V
Output voltage: 42V
Maximum charging current standard: 2.0A
Battery capacity: 7 - 30Ah
Charging characteristic: 4 stages Winter charger
Li-Ion battery: Yes
Lead battery: Yes
Charging plug: 5.5x2.5mm
Van Beijck e-bike charger for charging lithium-ion batteries. The charger has a clear LED charge indicator. Van Beijck chargers feature a standard 4-step (smart) charging characteristic. This allows e-bike batteries to be charged more efficiently than with standard chargers. A 4-step charger switches itself off when the maximum charge capacity is reached. A battery discharges very slowly, meaning the voltage will drop very gradually. The smart charger will automatically start trickle charging again when the battery reaches 75%, keeping your battery moving and in good condition. SPARTA: - Avantgarde 2014 2015 - Double i 2016 - Double-E 2015 - Entree i 2016 - F7i 2016 Sparta F8i 2016 - F8iRT 2016 - ION RX plus RT 2015 - ION RX+ 2014 2015 - ION RX+ prestige 2014 - ION RXS 2014 2015 - ION RXS+ 2014 2015 - M8i 2016 Sparta R10i 2016 - ION Entree RX 2015 BATAVUS: - Adagio Easy 2014 2015 - Legato Easy 2015 2016 - Mont Blanc easy 2014 2016 - Tourmalet E-go 2016 Koga - E-deluxe 2014 2016 - E-deluxe lady 2014 2016 - E-extension 2014 2016 - E-extension lady 2014 2016 - E-Special 2015 2016 - E-special lady 2015 2016 - E-tour 2015 2016 - E-tour lady 2015 2016 - E-xtension 2014 2015 Specifications Dimensions: 170 x 70 x 38 mm
Material: ABS plastic
Cooling: Passive
Output voltage: 42.0V
Maximum charging current: 2A
Charging characteristic: 4 stages
Application: Lithium-ion (Li-ion)
Charging plug: 4-pin XLR BSC42002000
Van Beijck 36V smart charger (Model 4 pins XLR charging plug) replacement charger for model SSLC084V42XH Suitable for Oa Qwic 36V Li-Ion batteries. 4 pin XLR Qwic charger is supplied in our own housing and this charger is also equipped with smart charging technology, First check the connection plug diagram (See photo 3) before ordering. This charger can also optionally be ordered as a 4A fast charger. Van Beijck battery - battery charger for charging Oa Qwic Li-Ion battery battery 36 volt electric bicycle. The charger has a clear LED charging indication. Van Beijck chargers have a 4-step (Winter charger) charging characteristic as standard. This ensures that batteries are charged better than with conventional chargers. This battery charger is used for Oa Qwic electric bicycles Product Specifications: Dimensions: 167mm x 69mm x 40mm
Battery material: ABS plastic
Cooling: Passive
Mains voltage: 110V - 240V
Output voltage: 42V
Maximum charging current: 2.0A
Battery capacity: 7 - 20Ah Charging characteristic: 4 stages Winter charger
Li-Ion battery: Yes
Charging plug: 4 pin XLR
These BOSCH batteries and chargers are black. Ideal for everyday use and high-quality. Bosch Power Cord - E-Bike Charger - Black. Bosch batteries & chargers black. Bosch Power Cord - E-Bike Charger - Black This Power Cord is compatible with most Bosch eBike chargers and provides a reliable power supply to your eBike system. Perfect as a replacement or spare cable for your Bosch eBike charger! Compatible with: Bosch eBike.System2 Active Line (BDU2XX) Performance Line (BDU2XX) Performance Line CX (BDU2XX) Active Line (BDU3XX) Active Line Plus (BDU3XX) Classic+ Line Performance Line (BDU3XX) Perform. Line Speed (BDU4XX) Perf/Cargo/CX/Speed (BDU4XX)
These SHIMANO batteries & chargers are designed for reliability and ease of use. Shimano Di2 battery charger for internal batteries. Shimano batteries & chargers. Shimano Di2 internal battery charger Shimano power charger with power cable, among others for BT-DN110 & SM-BTR2A New precision standards: Di2 The electronic DURA ACE groupset with Di2 technology complements the mechanical DURA ACE 9000 groupset. The electronic DURA ACE 9070 groupset is based on the latest technologies and offers the rider a revolutionary riding experience. After development work by hundreds of engineers and extensive testing on the Pro Tour, the DURA ACE with Di2 is available and is making a splash in the world of cycling.
These SHIMANO batteries & chargers are designed for reliability and ease of use. Shimano STEPS EC-E8004-1 Battery Charger (Europe). Shimano batteries & chargers. Shimano STEPS EC-E8004-1 Battery Charger (Europe) SHIMANO STEPS Battery Charger for Europe SHIMANO STEPS - Battery Charger - Plug Type C for Europe Designed for charging your SHIMANO STEPS battery without removing it from your e-bike, the EC-E8004-1 charger offers fast charge times and a small connector. It can also charge the battery directly using an adapter. FEATURES Lightweight and portable battery charger - Same compact size and weight as EC-E6002 Fast Charging - Fast charge from half to 80% in 1 hour - Charge from empty to 80% in 2.5 hours - Charge from empty to fully charged in 4.5 hours Equivalent to or higher than Water Resistance Class 5 (IPX5) PRODUCT SPECIFICATIONS Model Number: EC-E8004-1 Series: EP6 EP600 Series Color: Standard Notes: * In case of 100V AC ** Refer to the last collection chart Compatible Battery: BT-E6000 BT-E6001 BT-E6010 BT-E8010 BT-E8014 BT-E8016 BT-E8020 BT-E8035 BT-E8035-L BT-E8036 BT-EN404 BT-EN405 BT-EN604 BT-EN605 BT-EN606 BT-EN805 BT-EN805-L BT-EN806 Compatible Voltage: 100V - 240V AC, 50Hz - 60Hz CE Standard: Yes Plug-in Charging Type: Yes Charging Temperature: 0°C - 40°C Storage Temperature: -20°C - 60°C Battery Connector Adapter: ** - Built-in AC Cable: Yes Built-in AC Cable Length (m): 2 Error Signal: Yes Plug Type: Type C Suitable for Country/Region: Europe Charging Time for a 418Wh Battery (393Wh in Japan) 80% Charge (hours): 2.0 (* 2.5) Charging Time for a 418Wh Battery (393Wh in Japan) Full Charge (hours): 3.0 (* 3.5) Charging Time for a 504Wh Battery (464Wh in Japan) Japan) 80% charge (hours): 2.5 (* 3.2) Charging time for a 504 Wh battery (464 Wh in Japan) Full charge (hours): 4 (* 4.5) Charging time for a 630 Wh battery (583 Wh in Japan) Full charge (hours): 4.8 (* 5.7) Charging time for a 630 Wh battery (583 Wh in Japan) 80% charge (hours): 3.2 (* 4) Output: 42 V DC, 4 - 4.6 A.
These SHIMANO batteries & chargers are designed for reliability and ease of use. Shimano Steps EC-E8004 battery charger with power cable - 42 volts (in plastic bag). Shimano batteries & chargers. Shimano Steps EC-E8004 battery charger with power cable - 42 Volt (in plastic bag) SHIMANO STEPS - Battery Charger - Plug Type C for Europe The EC-E8004-1 charger, designed for charging your SHIMANO STEPS battery without removing it from your e-bike, offers fast charge times and a small connector. It can also charge the battery directly using an adapter. Lightweight and portable battery charger Same compact size and weight as EC-E6002 Fast Charging Fast charge from half to 80% in 1 hour Charge from empty to 80% in 2.5 hours Charge from empty to fully charged in 4.5 hours Equivalent to or higher than Water Resistance Class5 (IPX5) Product Specifications: Model: EC-E8004-1 Series: SHIMANO STEPS E8000 Series Color: Standard Example Country/Region: Europe Compatible Battery: BT-E6000, BT-E6001, BT-E6010, BT-E8010, BT-E8014, BT-E8016, BT-E8020, BT-E8035, BT-E8035-L, BT-E8036 Compatible Voltage: 100V - 240V AC, 50 - 60Hz CE Standard Full Charge Time (hours): 4 (* 4.5) 80% charge time (hours): 2.5 (* 3.2) Plug-in charging type Charging temperature: 0 - 40 °C Storage temperature: -20 - 60 °C Error signal: Yes Built-in AC cable Built-in AC cable length: 2 meters Plug type: Type C Supplied in a plastic bag (same version as 4550170530167)
These VAN BEIJCK batteries and chargers are designed for reliability and ease of use. Battery charger Van Moof 6.5 x 1.4 42V3a oa Van Moof , S3, X3. Van beijck batteries & chargers. Battery charger Van Moof 6.5 x 1.4 42V3a oa Van Moof , S3, X3 Van Moof bicycles are widely available and popular in the Netherlands. Even with these bicycles, it can happen that a charger stops working or breaks. We supply a replacement Van Moof charger for this, which is equipped with a 56.5 x 1.4mm charging connection plug. This VanMoof charger has a charging speed of 3 amps, meaning you can charge your battery at 3 amps per hour.
These VAN BEIJCK batteries and chargers are designed for reliability and ease of use. Battery charger Li-ion Smart charger 5.5 x 2.1mm (Fast charger 4A) 36 Volt / 4Ah. From Beijck batteries & chargers. Battery Charger Li-ion Smart Charger 5.5 x 2.1mm (Fast Charger 4A) 36 Volt / 4Ah This fast-charging bicycle battery charger is designed for charging Li-ion batteries for 36V electric bicycles. The 5.5mm plug shown is included with many electric bicycles. This charger has a charging speed of 4 amps per hour. If you have a 12AH battery, it will be fully charged in 3 hours. Van Beijck e-bike charger for charging lithium-ion batteries. The charger has a clear LED charge indicator. Van Beijck chargers feature a standard 4-stage (smart) charging characteristic. This allows e-bike batteries to be charged more efficiently than with standard chargers. A 4-stage charger switches itself off when the maximum charging capacity is reached. A battery discharges very slowly, meaning the voltage will gradually drop. The smart charger will automatically start trickle charging when the battery reaches 75%, keeping your battery moving and in good condition. Amslod Mihatra Freebike Batavus Mambo Babboe City Qwic Sparta E-Motion Specifications Dimensions: 170 x 70 x 38 mm Material: ABS plastic Cooling: Passive Output voltage: 42V Maximum charging current: 4A Charging characteristic: 4 stages Application: Lithium-ion (Li-ion) Charging plug: 5.5x2.1mm
These VAN BEIJCK batteries and chargers are designed for reliability and ease of use. Bosch 6 amp / 36 volt battery charger. From Beijck batteries and chargers. Battery charger model Bosch 6 amp / 36 Volt This bicycle battery fast charger for charging Bosch Li-Ion batteries. This charger has a charging speed of 6 amps per hour, if you have a 12AH battery, it will be completely full in 2 hours. A 4-step charger switches itself off when the maximum charging capacity is reached. The characteristic of a battery is that it discharges itself very slowly, so the voltage will drop very slowly again, the smart charger will automatically start trickle charging again when the battery reaches 75%, this way it keeps your battery moving and in good condition. Suitable for: Bosch Performance Bosch Classic Product specifications Dimensions: 170 x 70 x 38 mm Material: ABS plastic Cooling: Passive Output voltage: 42V Maximum charging current: 6A Charging characteristic: 4 stages Application: Lithium-ion (Li-ion) Charging plug: Bosch Classic - Performance
