The foot protection plates prevent little feet
get stuck between the spokes.
If your original plates get damaged, this is
the replacement part you need to
prevent your child from getting hurt.
Mount the Non-Wrong seat on the back of your
luggage rack and sitting on the back becomes a party.
You now cycle a little further. Easy and
universally mountable on almost any rear carrier
by means of the supplied thick pull strips.
Dimensions: 32x15x5cm
Mount the Non-Wrong seat on the back of your
luggage rack and sitting on the back becomes a party.
You now cycle a little further. Easy and
universally mountable on almost any rear carrier
by means of the supplied thick pull strips.
Dimensions: 32x15x5cm
1-point mounting bracket for use on bicycles
without (suitable) luggage carrier. Attachment
on the seat tube with a diameter between the
28-40mm. Suitable for 26" and 28" bikes.
NOTE: Only to be used in combination with
Click and Go mounting bracket RD5094 (Bobike
Exclusive and Bobike One)
This mounting block is included with all Bobike 1p seats
Supplied as standard. Ideal for use with
the seat on a second bicycle. It is effortless
1p seat interchangeable between the 2 bicycles.
Bobike/qibbel bracket 1 1/2 plus, this
bracket is for both normal 1 1/2 (38mm)
as for Cannondale suspension (39.8 mm)
inner tube.
The bracket can be upright or inverted
to be mounted (for men's models)
Sometimes the hole of the locking pin in the seat can
just a little too high to secure the cotter pin
can use. When you then
you can file down the tabs on the seat a fraction
the seat sometimes just 0.5 mm further
bags, see image 2.
This bracket can be used with a Bobike or Qibbel
child seat without any problems on a bicycle with
A-Headset stem can be mounted.
Adapter for Bobike or Qibbel seat on A-headset
Headset. Fits almost all A-headsets.
systems. Suitable for front forks from
28.6mm thickness (1 1/8 inch)
These folding footrests offer maximum
comfort and safety and prevent the feet
dangling loose from your child while cycling.
After use you can fold them up again. If you
original footrests get damaged, this is the
replacement part you need to
prevent your child from getting hurt.
Suitable for oval and round seat stays
with a diameter of 17 to 21 mm.
This bracket can be used with a Bobike or Qibbel
child seat without any problems on a bicycle
with A-Headset stem mounted
become, the bracket has only 3 mm length
of the front fork is required.
Adapter for Bobike or Qibbel seat on
A-headset headset Wide, special
developed to have more space between
the stem mount and the seat.
This bracket is for a front fork tube of
31.8 mm (1 1/4 inch), which is thicker than the
most common size 28.6mm. For this
see RD4994.
